Bike Computers GPS

Rider 15 neo comes with a clear 2" screen and 3 intuitive buttons, as well as improved software, more than 21 functions, and an orientation mode for displaying which direction the rider is going. Utilizing a large 2" display, the Rider 15 neo makes it even clearer to see speed data on the enlarged data grid. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. Featuring Global Navigation Satellite System (GNSS) support, the Rider 15 neo accommodates more expansive coverage and dexterity in any type of geography, including substantial tree & building cover or in the mountains, as well as providing a wider variety of regions by incorporating GPS (USA), Galileo (EUR) and QZSS (Japan) satellites. Equipped with a powerful 16-hour battery and on-the-go power bank charging support, the Rider 15 neo helps you to take on any distance or peak! Backed up by 21 features, this device supports rich data for accurately gauging the performance of each ride which can be viewed in post-workout analysis from the Bryton Active companion App (available for iOS and Android). Also, the Rider 15 neo integrates BLE Speed, Cadence and Heart Rate sensors including 3rd party sensors after effortless pairing. See phone notifications, including calls, texts and emails, right on the Rider 15 neo after easy setup with the Bryton Active App via BLE (available for iOS and Android), This powerful feature helps to make the Rider 15 neo the definitive smart cycling companion for every Bryton user. Night riding just got a lot more accurate! Equipped with a powerful built-in backlight, the Rider 15 neo's high contrast screen can be brightly illuminated for riding in dimly lit areas or convenient night cycling. Additionally, this device is mix-and-matchable with any bike accessories and will not experience interference from other connected devices or LED lights. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App's STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. Compete with worldwide riders through Rider 15 neo recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 15 neo supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.

Rider 15 neo comes with a clear 2" screen and 3 intuitive buttons, as well as improved software, more than 21 functions, and an orientation mode for displaying which direction the rider is going. Utilizing a large 2" display, the Rider 15 neo makes it even clearer to see speed data on the enlarged data grid. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. Featuring Global Navigation Satellite System (GNSS) support, the Rider 15 neo accommodates more expansive coverage and dexterity in any type of geography, including substantial tree & building cover or in the mountains, as well as providing a wider variety of regions by incorporating GPS (USA), Galileo (EUR) and QZSS (Japan) satellites. Equipped with a powerful 16-hour battery and on-the-go power bank charging support, the Rider 15 neo helps you to take on any distance or peak! Backed up by 21 features, this device supports rich data for accurately gauging the performance of each ride which can be viewed in post-workout analysis from the Bryton Active companion App (available for iOS and Android). Also, the Rider 15 neo integrates BLE Speed, Cadence and Heart Rate sensors including 3rd party sensors after effortless pairing. See phone notifications, including calls, texts and emails, right on the Rider 15 neo after easy setup with the Bryton Active App via BLE (available for iOS and Android), This powerful feature helps to make the Rider 15 neo the definitive smart cycling companion for every Bryton user. Night riding just got a lot more accurate! Equipped with a powerful built-in backlight, the Rider 15 neo's high contrast screen can be brightly illuminated for riding in dimly lit areas or convenient night cycling. Additionally, this device is mix-and-matchable with any bike accessories and will not experience interference from other connected devices or LED lights. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App's STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. Compete with worldwide riders through Rider 15 neo recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 15 neo supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.

Rider S500 integrates a sleek and efficient hardware design, including a crisp 2.4" screen and 4 simple buttons, as well as improved software, and advanced new features including Climb Challenge, ambient light sensor, improved user interface, and customizable quick-status menu options as well as improvements to routing and workout features. Compact Design The Rider S500 features a new sleek and compact design that is optimized for pro- and novice cyclists alike. Ambient Light Sensor Using the built-in ambient light sensor, the Bryton Rider S500 can automatically adjust its backlight based on the lighting conditions around it. 24hr Battery Life Equipped with an enormous 24 hours battery, the Rider S500 has the strength and stamina to take on any challenge. Customizable Quick-Status Menu The quick status menu is viewable at any time from the meter page by simply tapping on the screen. Seamless Recording The Rider S500 allows you to continue recording where you left off, even if the device is powered off, and will resume recording once powered back on! Voice Search The Bryton Rider S500 speaks your language! With connection to the internet, the Rider S500 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself! OpenStreetMaps and Biking POI's The Rider S500 is pre-loaded with OSM (OpenStreetMaps) maps supporting improved zoom level 16 with on-screen POI's. On the device map, a large range of POI's including bike shops, hospitals, water stops, restrooms, food, etc. are displayed, and by hovering the pointer over any POI, a brief description will be shown. Additionally, the OSM maps included on the Rider S500 have been enhanced to show MTB trails and other off-road features. Advanced Routing Features When following a route and riding off-track, the Rider S500, with connection to your phone, will re-route to get back on track. Additionally, you can reverse a route to switch the start and end locations as well as retrace an ongoing ride to get you back where you started along the same path. Turn-By-Turn Navigation Whether you are exploring new regions or following a downloaded route, the Rider S500 is the perfect riding companion, providing turn-by-turn navigation and advanced guidance data, including street names (when connected to Bryton Active), POI's & Peaks (customizable in Bryton Active), distance and direction information, and more all on pre-downloaded regional OSM (OpenStreetMaps) maps. Climb Challenge | Reach New Heights Climb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S500 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid color climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance. Advanced Workout Features With a new graphical workout overview with zoom support and advanced new features, including real-time intensity adjustment, TrainingPeaks support, a new resilience workout mode and workout note features (to add notes from the Bryton Active app or TrainingPeaks), trainings on the Rider S500 just got even better! View remaining workout progress, customizable power zones on the target power page and more, all with vivid graphical representation! Indoor Smart Trainer Boasting powerful new features and with a wide range of integrations, the Rider S500 brings the thrill of the ride to your home smart trainer! With ANT+ FE-C Smart Trainer compatibility, the Bryton Rider S500 can communicate with your indoor Smart Trainer to control resistance or power (target resistance / power), simulate custom virtual workouts (Smart Workout) or even simulate a route (Virtual Ride). Experience endless possibilities from the comfort of home with Virtual Ride Simulation. Utilizing ANT+ FE-C compatibility, the Rider S500 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience. Smart Workout Easily create custom virtual workouts for smart trainers with the Rider S500 at home! Training plans can be built with the Bryton Active App and downloaded directly to the device. With ANT+ FE-C support, the Rider S500 will communicate with your smart trainer to simulate the resistance from the training plan. Ride Safe, Train at Ease Share your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share to any messaging app with the press of a button. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also current speed, ride time, trip time, distance and last updated time! Garmin Varia Radar Compatibility Utilizing a connected ANT+ Rear-View Radar System, cyclists can view vehicles coming from behind up to 150m with notifications to keep alert. The strips located on the right side of every data page will signal in various colors and give off a beeping sound to warn users of approaching traffic. Ambient Light Sensor | Adapted for any Conditions Using the built-in ambient light sensor, the Bryton Rider S500 can automatically adjust its backlight based on the lighting conditions around it. When riding indoors, passing through a tunnel, under trees, etc., the backlight will automatically become brighter to compensate, ensuring optimal screen settings anywhere and anytime you ride! Compete with worldwide riders through Rider S500 recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops/Today's Plan by pairing accounts. What's even better is the Rider S500 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.

Rider S500 integrates a sleek and efficient hardware design, including a crisp 2.4" screen and 4 simple buttons, as well as improved software, and advanced new features including Climb Challenge, ambient light sensor, improved user interface, and customizable quick-status menu options as well as improvements to routing and workout features. Compact Design The Rider S500 features a new sleek and compact design that is optimized for pro- and novice cyclists alike. Ambient Light Sensor Using the built-in ambient light sensor, the Bryton Rider S500 can automatically adjust its backlight based on the lighting conditions around it. 24hr Battery Life Equipped with an enormous 24 hours battery, the Rider S500 has the strength and stamina to take on any challenge. Customizable Quick-Status Menu The quick status menu is viewable at any time from the meter page by simply tapping on the screen. Seamless Recording The Rider S500 allows you to continue recording where you left off, even if the device is powered off, and will resume recording once powered back on! Voice Search The Bryton Rider S500 speaks your language! With connection to the internet, the Rider S500 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself! OpenStreetMaps and Biking POI's The Rider S500 is pre-loaded with OSM (OpenStreetMaps) maps supporting improved zoom level 16 with on-screen POI's. On the device map, a large range of POI's including bike shops, hospitals, water stops, restrooms, food, etc. are displayed, and by hovering the pointer over any POI, a brief description will be shown. Additionally, the OSM maps included on the Rider S500 have been enhanced to show MTB trails and other off-road features. Advanced Routing Features When following a route and riding off-track, the Rider S500, with connection to your phone, will re-route to get back on track. Additionally, you can reverse a route to switch the start and end locations as well as retrace an ongoing ride to get you back where you started along the same path. Turn-By-Turn Navigation Whether you are exploring new regions or following a downloaded route, the Rider S500 is the perfect riding companion, providing turn-by-turn navigation and advanced guidance data, including street names (when connected to Bryton Active), POI's & Peaks (customizable in Bryton Active), distance and direction information, and more all on pre-downloaded regional OSM (OpenStreetMaps) maps. Climb Challenge | Reach New Heights Climb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S500 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid color climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance. Advanced Workout Features With a new graphical workout overview with zoom support and advanced new features, including real-time intensity adjustment, TrainingPeaks support, a new resilience workout mode and workout note features (to add notes from the Bryton Active app or TrainingPeaks), trainings on the Rider S500 just got even better! View remaining workout progress, customizable power zones on the target power page and more, all with vivid graphical representation! Indoor Smart Trainer Boasting powerful new features and with a wide range of integrations, the Rider S500 brings the thrill of the ride to your home smart trainer! With ANT+ FE-C Smart Trainer compatibility, the Bryton Rider S500 can communicate with your indoor Smart Trainer to control resistance or power (target resistance / power), simulate custom virtual workouts (Smart Workout) or even simulate a route (Virtual Ride). Experience endless possibilities from the comfort of home with Virtual Ride Simulation. Utilizing ANT+ FE-C compatibility, the Rider S500 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience. Smart Workout Easily create custom virtual workouts for smart trainers with the Rider S500 at home! Training plans can be built with the Bryton Active App and downloaded directly to the device. With ANT+ FE-C support, the Rider S500 will communicate with your smart trainer to simulate the resistance from the training plan. Ride Safe, Train at Ease Share your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share to any messaging app with the press of a button. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also current speed, ride time, trip time, distance and last updated time! Garmin Varia Radar Compatibility Utilizing a connected ANT+ Rear-View Radar System, cyclists can view vehicles coming from behind up to 150m with notifications to keep alert. The strips located on the right side of every data page will signal in various colors and give off a beeping sound to warn users of approaching traffic. Ambient Light Sensor | Adapted for any Conditions Using the built-in ambient light sensor, the Bryton Rider S500 can automatically adjust its backlight based on the lighting conditions around it. When riding indoors, passing through a tunnel, under trees, etc., the backlight will automatically become brighter to compensate, ensuring optimal screen settings anywhere and anytime you ride! Compete with worldwide riders through Rider S500 recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops/Today's Plan by pairing accounts. What's even better is the Rider S500 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.

With this flagship model on board, Bryton is rolling out a multitude of new premium features and 3rd-party support to fully augment the abilities of this high-end model. In addition to the Group Chat and Group Ride features, The Rider S800 leads the way with a carefully selected outdoor-tailored high contrast display and advanced navigation & workout capabilities, as well as compatibility with indoor smart trainers, rear-view bike radar, and Cycling Dynamics, and more! Wherever and whatever you ride, the Rider S800 has something for everyone.Extra-Large Crisp MIP Display Designed with the 3.4” large display, the Rider S800 utilizes MIP (Memory In Pixel) technology coupled with an internal reflection layer to be optimized for a better outdoor viewing experience without screen shadow. The extra wide MIP display with ultra narrow bezel offers both crisp, high-contrast readability and a high screen ratio, making this GPS cycle computer Bryton’s premiere device with clarity without compromise!36hr Battery LifeEmploying the MIP display and enhancements to increase efficiency, the Rider S800 low power-consumption in combination with its large battery helps to increase its overall efficiency, expanding its total battery life up to an enormous 36 hours. Without viewing map pages, the Rider S800 is able to extend its battery life to more than 40 hours of continuous use. The Rider S800 has the strength and stamina to take on any challenge, and, with on-the-go mobile charging support, you can top-up the charge to enjoy any length of journey no matter where you choose to ride!Voice SearchThe Bryton Rider S800 speaks your language! With connection to the internet, the Rider S800 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself!Advanced Routing FeaturesThe Rider S800 incorporates fully-featured navigation functions, providing turn-by-turn and route-guidance features all on pre-installed regional OSM maps. In addition to navigation, the Rider S800 supports advanced features to help you stay on track and get the most out of your rides, such as auto-rerouting, on-screen POIs,reverse saved rides, and route retracing, and with the Bryton Active app you can plan your own or sync 3rd party routes, add custom POI/Peak information to rides and more!Climb ChallengeClimb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S800 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid color climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance.Route ExploreLeave no stone unturned with the Rider S800’s new Explore feature which will help you experience and explore the world on two wheels like never before. Simply select how far you would like to ride and let the Rider S800 be your guide! Generating up to three unique routes starting from your current location, the Rider S800 will help you explore the unknown and bring you back home again.Live TrackShare your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share to any messaging app with the press of a button. Users can also opt-in for invitations to be auto-sent via email to desired contacts for added convenience. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also current speed, ride time, trip time and distance.Group Chat & Ride The Rider S800 is even more fun with friends! Using the Bryton Active app, select your track, invite your friends to a group and see live updates for group members on your route right from your device. Keep in touch, cheer on your friends or send status updates to others by using voice input to create customizable messages directly from the Rider S800. Additionally, with the Bryton Active app, setting up a group ride is as easy as a press of a button.

With this flagship model on board, Bryton is rolling out a multitude of new premium features and 3rd-party support to fully augment the abilities of this high-end model. In addition to the Group Chat and Group Ride features, The Rider S800 leads the way with a carefully selected outdoor-tailored high contrast display and advanced navigation & workout capabilities, as well as compatibility with indoor smart trainers, rear-view bike radar, and Cycling Dynamics, and more! Wherever and whatever you ride, the Rider S800 has something for everyone.Extra-Large Crisp MIP Display Designed with the 3.4” large display, the Rider S800 utilizes MIP (Memory In Pixel) technology coupled with an internal reflection layer to be optimized for a better outdoor viewing experience without screen shadow. The extra wide MIP display with ultra narrow bezel offers both crisp, high-contrast readability and a high screen ratio, making this GPS cycle computer Bryton’s premiere device with clarity without compromise!36hr Battery LifeEmploying the MIP display and enhancements to increase efficiency, the Rider S800 low power-consumption in combination with its large battery helps to increase its overall efficiency, expanding its total battery life up to an enormous 36 hours. Without viewing map pages, the Rider S800 is able to extend its battery life to more than 40 hours of continuous use. The Rider S800 has the strength and stamina to take on any challenge, and, with on-the-go mobile charging support, you can top-up the charge to enjoy any length of journey no matter where you choose to ride!Voice SearchThe Bryton Rider S800 speaks your language! With connection to the internet, the Rider S800 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself!Advanced Routing FeaturesThe Rider S800 incorporates fully-featured navigation functions, providing turn-by-turn and route-guidance features all on pre-installed regional OSM maps. In addition to navigation, the Rider S800 supports advanced features to help you stay on track and get the most out of your rides, such as auto-rerouting, on-screen POIs,reverse saved rides, and route retracing, and with the Bryton Active app you can plan your own or sync 3rd party routes, add custom POI/Peak information to rides and more!Climb ChallengeClimb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S800 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid color climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance.Route ExploreLeave no stone unturned with the Rider S800’s new Explore feature which will help you experience and explore the world on two wheels like never before. Simply select how far you would like to ride and let the Rider S800 be your guide! Generating up to three unique routes starting from your current location, the Rider S800 will help you explore the unknown and bring you back home again.Live TrackShare your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share to any messaging app with the press of a button. Users can also opt-in for invitations to be auto-sent via email to desired contacts for added convenience. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also current speed, ride time, trip time and distance.Group Chat & Ride The Rider S800 is even more fun with friends! Using the Bryton Active app, select your track, invite your friends to a group and see live updates for group members on your route right from your device. Keep in touch, cheer on your friends or send status updates to others by using voice input to create customizable messages directly from the Rider S800. Additionally, with the Bryton Active app, setting up a group ride is as easy as a press of a button.

Designed for demanding cyclists looking for powerful new features and technologies, the all new Rider 750 Special Edition excites with pre-loaded maps for online navigation and a range of advanced training features well beyond it’s price tag. The New Rider750 Special Edition also includes new features such as: Upgraded Navigation Features ✓ The Rider 750 SE now can reroute back to the route without internet access (on-device rerouting) ✓ Turn by Turn Navigation ✓ Regional Maps & Global Maps Free to install ✓ Voice Input Navigation with auto-generated Device Turn Information Improved Hardware Features ✓ Extended 40 hour Battery Life ✓ S-Series Chip for improved Performance ✓ Ambient Light Sensor for Improved Readability ✓ Upgraded USB-C Port for Map & Firmware Updates Training and Safety Features ✓ Refined Quick Status with more Options ✓ ANT+ Protocols for Radar and Light Controls ✓ Climb Challenge Feature ✓ Smart Incident Detection

Simple, simpler, ROX 2.0. This GPS bike computer is perfect for all those recreational athletes who use all the essential advantages of a GPS bike computer but don't want to spend a fortune for one. Its large, easy-to-read display combined with its simple operation make it the ideal companion on your bike tour. The ROX 2.0 bike computer has 14 functions, such as displaying speed, distance, training time, navigation information, and connection to an e-bike. LARGE DISPLAY The 2-inch high-contrast display's dimensions and extra-large numbers are make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with two values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 2.0 bike computer can be positioned directly on the handlebars in a few easy steps. There is no need to mount cables or sensors. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with two buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. THE CLASSIC The classical SIGMA GPS handlebar bracket can be fixed in place without tools in a few seconds with two cable ties. This gives you a choice between installation on your handlebars or on the stem, and the device fits handlebars of all sizes. PIONEER Connect your ROX 2.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 2.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in colour and shows the distance to next turn-offs as coloured bar that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 2.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. You can use this list to find out if your E-BIKE is compatible with the ROX 2.0. UP-TO-DATE You can use the SIGMA RIDE app to collect your training data, transfer them from the ROX 2.0 to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

Simple, simpler, ROX 2.0. This GPS bike computer is perfect for all those recreational athletes who use all the essential advantages of a GPS bike computer but don't want to spend a fortune for one. Its large, easy-to-read display combined with its simple operation make it the ideal companion on your bike tour. The ROX 2.0 bike computer has 14 functions, such as displaying speed, distance, training time, navigation information, and connection to an e-bike. LARGE DISPLAY The 2-inch high-contrast display's dimensions and extra-large numbers are make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with two values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 2.0 bike computer can be positioned directly on the handlebars in a few easy steps. There is no need to mount cables or sensors. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with two buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. PERFECTLY POSITIONED The Overclamp Butler enables you to perfectly align your ROX 2.0 bike computer, even if you have a short stem. For instance, the bike computer can be positioned centrally above the stem at the level of the handlebars. This ensures that there is space and order on your handlebars and that you have a good overview of all values. The Butler fits on handlebars of 31.8 and 35 mm diameters. PIONEER Connect your ROX 2.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 2.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in colour and shows the distance to next turn-offs as coloured bar that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 2.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. You can use this list to find out if your E-BIKE is compatible with the ROX 2.0. UP-TO-DATE You can use the SIGMA RIDE app to collect your training data, transfer them from the ROX 2.0 to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

Simple, simpler, ROX 2.0. This GPS bike computer is perfect for all those recreational athletes who use all the essential advantages of a GPS bike computer but don't want to spend a fortune for one. Its large, easy-to-read display combined with its simple operation make it the ideal companion on your bike tour. The ROX 2.0 bike computer has 14 functions, such as displaying speed, distance, training time, navigation information, and connection to an e-bike. LARGE DISPLAY The 2-inch high-contrast display's dimensions and extra-large numbers are make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with two values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 2.0 bike computer can be positioned directly on the handlebars in a few easy steps. There is no need to mount cables or sensors. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with two buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. PERFECTLY POSITIONED The Overclamp Butler enables you to perfectly align your ROX 2.0 bike computer, even if you have a short stem. For instance, the bike computer can be positioned centrally above the stem at the level of the handlebars. This ensures that there is space and order on your handlebars and that you have a good overview of all values. The Butler fits on handlebars of 31.8 and 35 mm diameters. PIONEER Connect your ROX 2.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 2.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in colour and shows the distance to next turn-offs as coloured bar that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 2.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. You can use this list to find out if your E-BIKE is compatible with the ROX 2.0. UP-TO-DATE You can use the SIGMA RIDE app to collect your training data, transfer them from the ROX 2.0 to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

The ROX 4.0 GPS supports you on your bike tour with 30 functions and user-friendly controls, allowing you to focus on what is important: enjoying biking. The extra-large display reliably shows data such as altitude profile, speed, distance, and training time. The ROX 4.0 bike computer also shows navigation information and connection to an e-bike and external sensors as a matter of course! LARGE DISPLAY The 2.4-inch-diagonal high-contrast display and extra-large numbers make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with three values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 4.0 bike computer can be positioned directly on the handlebars in a few easy steps –entirely without cables or sensors. If you want, you can connect your Rox 4.0 to additionalsensors for measuring speed, heart rate, and cadence. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with three buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. UP WHERE THE AIR IS CLEAR A true highlight of the ROX 4.0 is the integrated air pressure sensor. It uses barometric readings to determine inclines and declines and provide you with reliable information about altitude, allowing a precise recording of your track. You can also call up a graphical altitude profile on the ROX 4.0. The home altitude at the beginning of the tour is determined automatically from GPS, or you can set altitude manually. PIONEER Connect your ROX 4.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 4.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in red and shows the distance to upcoming turn-offs as coloured bars that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 4.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. BEST MEASUREMENTS Do you need more data or even greater accuracy for your values? ANT+ and BLE enable you to connect external sensors such as speed, heart rate, and cadence sensors to your ROX 4.0. You can find accessories sets with various sensors for your ROX in our shop. FOR DATA COLLECTORS You can use the SIGMA RIDE app to collect your training data, transfer them to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

The ROX 4.0 GPS supports you on your bike tour with 30 functions and user-friendly controls, allowing you to focus on what is important: enjoying biking. The extra-large display reliably shows data such as altitude profile, speed, distance, and training time. The ROX 4.0 bike computer also shows navigation information and connection to an e-bike and external sensors as a matter of course! LARGE DISPLAY The 2.4-inch-diagonal high-contrast display and extra-large numbers make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with three values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 4.0 bike computer can be positioned directly on the handlebars in a few easy steps –entirely without cables or sensors. If you want, you can connect your Rox 4.0 to additionalsensors for measuring speed, heart rate, and cadence. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with three buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. UP WHERE THE AIR IS CLEAR A true highlight of the ROX 4.0 is the integrated air pressure sensor. It uses barometric readings to determine inclines and declines and provide you with reliable information about altitude, allowing a precise recording of your track. You can also call up a graphical altitude profile on the ROX 4.0. The home altitude at the beginning of the tour is determined automatically from GPS, or you can set altitude manually. PIONEER Connect your ROX 4.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 4.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in red and shows the distance to upcoming turn-offs as coloured bars that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 4.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. BEST MEASUREMENTS Do you need more data or even greater accuracy for your values? ANT+ and BLE enable you to connect external sensors such as speed, heart rate, and cadence sensors to your ROX 4.0. You can find accessories sets with various sensors for your ROX in our shop. FOR DATA COLLECTORS You can use the SIGMA RIDE app to collect your training data, transfer them to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

The ROX 4.0 GPS supports you on your bike tour with 30 functions and user-friendly controls, allowing you to focus on what is important: enjoying biking. The extra-large display reliably shows data such as altitude profile, speed, distance, and training time. The ROX 4.0 bike computer also shows navigation information and connection to an e-bike and external sensors as a matter of course! LARGE DISPLAY The 2.4-inch-diagonal high-contrast display and extra-large numbers make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with three values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 4.0 bike computer can be positioned directly on the handlebars in a few easy steps –entirely without cables or sensors. If you want, you can connect your Rox 4.0 to additionalsensors for measuring speed, heart rate, and cadence. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with three buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. UP WHERE THE AIR IS CLEAR A true highlight of the ROX 4.0 is the integrated air pressure sensor. It uses barometric readings to determine inclines and declines and provide you with reliable information about altitude, allowing a precise recording of your track. You can also call up a graphical altitude profile on the ROX 4.0. The home altitude at the beginning of the tour is determined automatically from GPS, or you can set altitude manually. PIONEER Connect your ROX 4.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 4.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in red and shows the distance to upcoming turn-offs as coloured bars that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 4.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. BEST MEASUREMENTS Do you need more data or even greater accuracy for your values? ANT+ and BLE enable you to connect external sensors such as speed, heart rate, and cadence sensors to your ROX 4.0. You can find accessories sets with various sensors for your ROX in our shop. FOR DATA COLLECTORS You can use the SIGMA RIDE app to collect your training data, transfer them to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

The ROX 4.0 GPS supports you on your bike tour with 30 functions and user-friendly controls, allowing you to focus on what is important: enjoying biking. The extra-large display reliably shows data such as altitude profile, speed, distance, and training time. The ROX 4.0 bike computer also shows navigation information and connection to an e-bike and external sensors as a matter of course! LARGE DISPLAY The 2.4-inch-diagonal high-contrast display and extra-large numbers make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with three values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 4.0 bike computer can be positioned directly on the handlebars in a few easy steps –entirely without cables or sensors. If you want, you can connect your Rox 4.0 to additionalsensors for measuring speed, heart rate, and cadence. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with three buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. UP WHERE THE AIR IS CLEAR A true highlight of the ROX 4.0 is the integrated air pressure sensor. It uses barometric readings to determine inclines and declines and provide you with reliable information about altitude, allowing a precise recording of your track. You can also call up a graphical altitude profile on the ROX 4.0. The home altitude at the beginning of the tour is determined automatically from GPS, or you can set altitude manually. PIONEER Connect your ROX 4.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 4.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in red and shows the distance to upcoming turn-offs as coloured bars that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 4.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. BEST MEASUREMENTS Do you need more data or even greater accuracy for your values? ANT+ and BLE enable you to connect external sensors such as speed, heart rate, and cadence sensors to your ROX 4.0. You can find accessories sets with various sensors for your ROX in our shop. FOR DATA COLLECTORS You can use the SIGMA RIDE app to collect your training data, transfer them to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

The ROX 4.0 GPS supports you on your bike tour with 30 functions and user-friendly controls, allowing you to focus on what is important: enjoying biking. The extra-large display reliably shows data such as altitude profile, speed, distance, and training time. The ROX 4.0 bike computer also shows navigation information and connection to an e-bike and external sensors as a matter of course! LARGE DISPLAY The 2.4-inch-diagonal high-contrast display and extra-large numbers make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with three values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 4.0 bike computer can be positioned directly on the handlebars in a few easy steps –entirely without cables or sensors. If you want, you can connect your Rox 4.0 to additionalsensors for measuring speed, heart rate, and cadence. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with three buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. UP WHERE THE AIR IS CLEAR A true highlight of the ROX 4.0 is the integrated air pressure sensor. It uses barometric readings to determine inclines and declines and provide you with reliable information about altitude, allowing a precise recording of your track. You can also call up a graphical altitude profile on the ROX 4.0. The home altitude at the beginning of the tour is determined automatically from GPS, or you can set altitude manually. PIONEER Connect your ROX 4.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 4.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in red and shows the distance to upcoming turn-offs as coloured bars that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 4.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. BEST MEASUREMENTS Do you need more data or even greater accuracy for your values? ANT+ and BLE enable you to connect external sensors such as speed, heart rate, and cadence sensors to your ROX 4.0. You can find accessories sets with various sensors for your ROX in our shop. FOR DATA COLLECTORS You can use the SIGMA RIDE app to collect your training data, transfer them to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

The ROX 4.0 GPS supports you on your bike tour with 30 functions and user-friendly controls, allowing you to focus on what is important: enjoying biking. The extra-large display reliably shows data such as altitude profile, speed, distance, and training time. The ROX 4.0 bike computer also shows navigation information and connection to an e-bike and external sensors as a matter of course! LARGE DISPLAY The 2.4-inch-diagonal high-contrast display and extra-large numbers make it easy to read, even during a ride. RED CIRCLE The innovative Red Circle on the upper right corner of the display is highlighted in various colours and offers innovative, interesting display of training data. EVERYTHING AT A GLANCE The SIGMA RIDE app allows you to set your display view individually. You can set up to six views, each with three values. Current speed and time are shown continuously on the display. READY TO GO ANY TIME! The ROX 4.0 bike computer can be positioned directly on the handlebars in a few easy steps –entirely without cables or sensors. If you want, you can connect your Rox 4.0 to additionalsensors for measuring speed, heart rate, and cadence. Your ROX uses GPS and GLONASS to determine your position within a few seconds of being switched on.The user-friendly operation with three buttons enables you to start a bike tour right away.You can use the SIGMA RIDE app to set your individual display views. UP WHERE THE AIR IS CLEAR A true highlight of the ROX 4.0 is the integrated air pressure sensor. It uses barometric readings to determine inclines and declines and provide you with reliable information about altitude, allowing a precise recording of your track. You can also call up a graphical altitude profile on the ROX 4.0. The home altitude at the beginning of the tour is determined automatically from GPS, or you can set altitude manually. PIONEER Connect your ROX 4.0 with your komoot app and leave your smart phone in your pocket. Receive turn-by-turn navigation from the komoot app on your ROX 4.0. It can be displayed either as an arrow on the display or inside the Red Circle. This circle on the display is highlighted in red and shows the distance to upcoming turn-offs as coloured bars that get shorter as the turn-offs get nearer. The number of metres to the next turn-off is also displayed next to the circle. E-BIKE-READY You ride an e-bike? No problem. The ROX 4.0 is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you the current assist mode, battery status, and light and other data on the display. BEST MEASUREMENTS Do you need more data or even greater accuracy for your values? ANT+ and BLE enable you to connect external sensors such as speed, heart rate, and cadence sensors to your ROX 4.0. You can find accessories sets with various sensors for your ROX in our shop. FOR DATA COLLECTORS You can use the SIGMA RIDE app to collect your training data, transfer them to your smart phone via BLE, and quickly set your favourite display views on your smart phone. The most important data and statistics can be read from your smart phone in real time with the SIGMA RIDE app's LIVE function and assessed conveniently. BE THERE LIVE Record your data with your bike computer and analyse them right away with the SIGMA RIDE app's LIVE view. You can set your individual display views extremely easily while you're riding. STAY TUNED Smart notifications connect you to the outside world even when you're riding. Notifications of incoming calls and messages to your smart phone appear on your display.

Whether you are trying for a best time, maintaining your fitness level, or just want to share your tours with friends and family, the ROX 11.1 EVO bike computer is your perfect training partner for indoor and outdoor training. In addition to its many training functions, the GPS bike computer offers navigation, structured workouts, and connection to external sensors. This allows you to focus entirely on your performance – the ROX 11.1 EVO does the rest. The LIVE function allows you to analyse your training data at any time with the SIGMA RIDE app. FIRST-CLASS FUNCTIONS The bike computer's 150 functions reliably support and guide you when you are training or on a ride with your friends. The ROX 11.1 EVO delivers all data reliably and in real time. The scope of function includes tracking speed and distance with GPS, barometric altitude measurement and navigation with Track or komoot, and compatibility with e-bikes and external sensors. The integrated Crash Alert feature informs your emergency contacts if you fall off your bike. Smart notifications inform you of incoming calls and messages during your ride. Create workouts using the service of your choice and import them in FIT format into your ROX 11.1 EVO. YOUR PERSONAL PROFILE Your freedom knows no bounds. Four of up to 20 possible sport profiles are already pre-installed on the ROX 11.1 EVO. Create your own sport profile and use the ROX 11.1 on different bikes. Six different training views with one to six data fields can be highlighted in colour with the SIGMA RIDE app, with a configuration tailored entirely to you. This lets you keep an eye on your personal goals. Screens for komoot workout, track, and navigation are also installed. An additional data page can be called up for connected FE-C smart trainers. Connect your ROX with a smart phone and track your performances right away on the SIGMA RIDE app Live Screen. YOUR SPORT PROFILES Up to 20 different sport profiles, such as road bike and mountain bike, can be installed and called up on the ROX 11.1 EVO. CUSTOMIZATION Design your personal cockpit and select individually how many and what values should be shown on your display. COLOURED DATA FIELDS The individual data fields can be highlighted in up to eight different colours, allowing a better overview and quicker readability. COMPREHENSIVE DATA COLLECTION How long, how fast, how high? Save up to 100 hours of riding time on your ROX 11.1 EVO to keep an eye on your values at all times. Analyse your performance quickly on the ROX 11.1 EVO or the SIGMA RIDE app's Live Screen. After training, the SIGMA DATA CENTER is, of course, available to you on your PC or Mac. There, you can analyse your data in more detail and plan tracks. Compare your training values, check out your progress, and use the workouts to control your individual training. Use the many SIGMA RIDE app sharing options to let your friends and teammates know about your successes. EVERYTHING AT A GLANCE Navigation information and ride data can be very easily read on the 1.77-inch transmissive colour display because of its outstanding contrast. The display is continuously lit and adjusts automatically to various lighting conditions thanks to its ambient light sensor. Do you want your display to be brighter or dimmer? No problem! As needed, you can set ten different brightness levels. The data fields in the training view can be set as you desire and highlighted in colour. Combined with the high-contrast display and the large digits, this ensures excellent legibility. SPORTY DESIGN The ROX 11.1 EVO wins over customers with its compact, modern design. It is very light at 55 grammes and fits perfectly into your cockpit. This lets you keep an eye on everything without the bike computer impairing your performance. Two colours to choose fromThe ROX 11.1 EVO is available in two colours: subtle grey or bolder white. The display is AR-coated so that it can be read easily even in the woods. READY TO GO AT A MOMENT'S NOTICE! The ROX 11.1 EVO stands out with its simple, intuitive operation. The five large buttons are easily accessible, so the bike computer is extremely easy to use even when you're wearing gloves. The simple menu navigation helps you find your way around easily, taking you right where you want to go in just a few steps. When it is started up, the device goes straight to training mode, and you can start riding. A separate menu button allows fast access to settings and functions such as workout and track navigation. The ROX 11.1 EVO emits an acoustic signal when you receive a message or a call or need to turn. TRACK NAVIGATION Plan a track with your friends! Create a track in SIGMA DATA CENTER or with a third-party provider of your choice and load it to the ROX 11.1 EVO. Within track navigation, you can see the right way to go. You can also set waypoints in track navigation – for special highlights or coffee breaks on your route. If you leave the track, the ROX sends you a notification and displays the shortest route back to it. The track view zooms automatically with your speed so that you are never surprised by a curve. If you leave the track, the zoom level is increased automatically so that you can always see the track and find your way back to it quickly. NAVIGATION WITH KOMOOT Connect your ROX 11.1 EVO with your komoot app, start your tour in the app, and put your smart phone in your pocket. komoot navigation instructions are displayed on the ROX 11.1 EVO. INDOOR CYCLING TREND Are you up for some indoor training? Connect the ROX 11.1 EVO to your smart trainer or stationary bicycle trainer. This lets you use the numerous training computer features during indoor training as well. EASY COUPLING BLE and ANT+ make it extremely easy to fluidly and reliably combine sensors that measure speed, cadence, and pulse. You can get the ROX 11.1 EVO in a set with our new magnet-free speed and cadence sensors (which are also available as accessories). Your ROX 11.1 EVO can also be coupled to your electronic switching or the power meter. Speed measurement SRAM eTap compatible Cadence measurement Shimano Di2 compatible Heart rate measurement Smart Trainer (ANT+) Watt measurement with power meter E-BIKE READY? SURE THING! The ROX 11.1 EVO is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you specific values such as the remaining ride range, battery charge, and support level. EXPERIENCE IT LIVE! Record your data with the bike computer and analyse them right away with the SIGMA RIDE app's LIVE screen. You can set your individual training views extremely easily while you're riding or use one of the pre-programmed views. SAFETY FIRST The ROX 11.1 EVO automatically detects a fall and gives you 30 seconds to confirm that you're OK. If there is no confirmation, the SIGMA RIDE app automatically sends an SMS to your emergency contacts and gives them your GPS data. You can also save emergency information such as blood type, name, and medication to your device. If there is an emergency, this information will appear on your display. STAY CONNECTED! Smart notifications connect your smartphone to the ROX 11.1 EVO even when you're riding. Notifications of incoming calls, messages, and e-mails appear automatically on your display. You can even read short messages directly on your ROX 11.1 EVO. If you need quiet while you're riding, you can disable sounds or smart notifications.

Whether you are trying for a best time, maintaining your fitness level, or just want to share your tours with friends and family, the ROX 11.1 EVO bike computer is your perfect training partner for indoor and outdoor training. In addition to its many training functions, the GPS bike computer offers navigation, structured workouts, and connection to external sensors. This allows you to focus entirely on your performance – the ROX 11.1 EVO does the rest. The LIVE function allows you to analyse your training data at any time with the SIGMA RIDE app. FIRST-CLASS FUNCTIONS The bike computer's 150 functions reliably support and guide you when you are training or on a ride with your friends. The ROX 11.1 EVO delivers all data reliably and in real time. The scope of function includes tracking speed and distance with GPS, barometric altitude measurement and navigation with Track or komoot, and compatibility with e-bikes and external sensors. The integrated Crash Alert feature informs your emergency contacts if you fall off your bike. Smart notifications inform you of incoming calls and messages during your ride. Create workouts using the service of your choice and import them in FIT format into your ROX 11.1 EVO. YOUR PERSONAL PROFILE Your freedom knows no bounds. Four of up to 20 possible sport profiles are already pre-installed on the ROX 11.1 EVO. Create your own sport profile and use the ROX 11.1 on different bikes. Six different training views with one to six data fields can be highlighted in colour with the SIGMA RIDE app, with a configuration tailored entirely to you. This lets you keep an eye on your personal goals. Screens for komoot workout, track, and navigation are also installed. An additional data page can be called up for connected FE-C smart trainers. Connect your ROX with a smart phone and track your performances right away on the SIGMA RIDE app Live Screen. YOUR SPORT PROFILES Up to 20 different sport profiles, such as road bike and mountain bike, can be installed and called up on the ROX 11.1 EVO. CUSTOMIZATION Design your personal cockpit and select individually how many and what values should be shown on your display. COLOURED DATA FIELDS The individual data fields can be highlighted in up to eight different colours, allowing a better overview and quicker readability. COMPREHENSIVE DATA COLLECTION How long, how fast, how high? Save up to 100 hours of riding time on your ROX 11.1 EVO to keep an eye on your values at all times. Analyse your performance quickly on the ROX 11.1 EVO or the SIGMA RIDE app's Live Screen. After training, the SIGMA DATA CENTER is, of course, available to you on your PC or Mac. There, you can analyse your data in more detail and plan tracks. Compare your training values, check out your progress, and use the workouts to control your individual training. Use the many SIGMA RIDE app sharing options to let your friends and teammates know about your successes. EVERYTHING AT A GLANCE Navigation information and ride data can be very easily read on the 1.77-inch transmissive colour display because of its outstanding contrast. The display is continuously lit and adjusts automatically to various lighting conditions thanks to its ambient light sensor. Do you want your display to be brighter or dimmer? No problem! As needed, you can set ten different brightness levels. The data fields in the training view can be set as you desire and highlighted in colour. Combined with the high-contrast display and the large digits, this ensures excellent legibility. SPORTY DESIGN The ROX 11.1 EVO wins over customers with its compact, modern design. It is very light at 55 grammes and fits perfectly into your cockpit. This lets you keep an eye on everything without the bike computer impairing your performance. Two colours to choose fromThe ROX 11.1 EVO is available in two colours: subtle grey or bolder white. The display is AR-coated so that it can be read easily even in the woods. READY TO GO AT A MOMENT'S NOTICE! The ROX 11.1 EVO stands out with its simple, intuitive operation. The five large buttons are easily accessible, so the bike computer is extremely easy to use even when you're wearing gloves. The simple menu navigation helps you find your way around easily, taking you right where you want to go in just a few steps. When it is started up, the device goes straight to training mode, and you can start riding. A separate menu button allows fast access to settings and functions such as workout and track navigation. The ROX 11.1 EVO emits an acoustic signal when you receive a message or a call or need to turn. TRACK NAVIGATION Plan a track with your friends! Create a track in SIGMA DATA CENTER or with a third-party provider of your choice and load it to the ROX 11.1 EVO. Within track navigation, you can see the right way to go. You can also set waypoints in track navigation – for special highlights or coffee breaks on your route. If you leave the track, the ROX sends you a notification and displays the shortest route back to it. The track view zooms automatically with your speed so that you are never surprised by a curve. If you leave the track, the zoom level is increased automatically so that you can always see the track and find your way back to it quickly. NAVIGATION WITH KOMOOT Connect your ROX 11.1 EVO with your komoot app, start your tour in the app, and put your smart phone in your pocket. komoot navigation instructions are displayed on the ROX 11.1 EVO. INDOOR CYCLING TREND Are you up for some indoor training? Connect the ROX 11.1 EVO to your smart trainer or stationary bicycle trainer. This lets you use the numerous training computer features during indoor training as well. EASY COUPLING BLE and ANT+ make it extremely easy to fluidly and reliably combine sensors that measure speed, cadence, and pulse. You can get the ROX 11.1 EVO in a set with our new magnet-free speed and cadence sensors (which are also available as accessories). Your ROX 11.1 EVO can also be coupled to your electronic switching or the power meter. Speed measurement SRAM eTap compatible Cadence measurement Shimano Di2 compatible Heart rate measurement Smart Trainer (ANT+) Watt measurement with power meter E-BIKE READY? SURE THING! The ROX 11.1 EVO is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you specific values such as the remaining ride range, battery charge, and support level. EXPERIENCE IT LIVE! Record your data with the bike computer and analyse them right away with the SIGMA RIDE app's LIVE screen. You can set your individual training views extremely easily while you're riding or use one of the pre-programmed views. SAFETY FIRST The ROX 11.1 EVO automatically detects a fall and gives you 30 seconds to confirm that you're OK. If there is no confirmation, the SIGMA RIDE app automatically sends an SMS to your emergency contacts and gives them your GPS data. You can also save emergency information such as blood type, name, and medication to your device. If there is an emergency, this information will appear on your display. STAY CONNECTED! Smart notifications connect your smartphone to the ROX 11.1 EVO even when you're riding. Notifications of incoming calls, messages, and e-mails appear automatically on your display. You can even read short messages directly on your ROX 11.1 EVO. If you need quiet while you're riding, you can disable sounds or smart notifications.

Whether you are trying for a best time, maintaining your fitness level, or just want to share your tours with friends and family, the ROX 11.1 EVO bike computer is your perfect training partner for indoor and outdoor training. In addition to its many training functions, the GPS bike computer offers navigation, structured workouts, and connection to external sensors. This allows you to focus entirely on your performance – the ROX 11.1 EVO does the rest. The LIVE function allows you to analyse your training data at any time with the SIGMA RIDE app. FIRST-CLASS FUNCTIONS The bike computer's 150 functions reliably support and guide you when you are training or on a ride with your friends. The ROX 11.1 EVO delivers all data reliably and in real time. The scope of function includes tracking speed and distance with GPS, barometric altitude measurement and navigation with Track or komoot, and compatibility with e-bikes and external sensors. The integrated Crash Alert feature informs your emergency contacts if you fall off your bike. Smart notifications inform you of incoming calls and messages during your ride. Create workouts using the service of your choice and import them in FIT format into your ROX 11.1 EVO. YOUR PERSONAL PROFILE Your freedom knows no bounds. Four of up to 20 possible sport profiles are already pre-installed on the ROX 11.1 EVO. Create your own sport profile and use the ROX 11.1 on different bikes. Six different training views with one to six data fields can be highlighted in colour with the SIGMA RIDE app, with a configuration tailored entirely to you. This lets you keep an eye on your personal goals. Screens for komoot workout, track, and navigation are also installed. An additional data page can be called up for connected FE-C smart trainers. Connect your ROX with a smart phone and track your performances right away on the SIGMA RIDE app Live Screen. YOUR SPORT PROFILES Up to 20 different sport profiles, such as road bike and mountain bike, can be installed and called up on the ROX 11.1 EVO. CUSTOMIZATION Design your personal cockpit and select individually how many and what values should be shown on your display. COLOURED DATA FIELDS The individual data fields can be highlighted in up to eight different colours, allowing a better overview and quicker readability. COMPREHENSIVE DATA COLLECTION How long, how fast, how high? Save up to 100 hours of riding time on your ROX 11.1 EVO to keep an eye on your values at all times. Analyse your performance quickly on the ROX 11.1 EVO or the SIGMA RIDE app's Live Screen. After training, the SIGMA DATA CENTER is, of course, available to you on your PC or Mac. There, you can analyse your data in more detail and plan tracks. Compare your training values, check out your progress, and use the workouts to control your individual training. Use the many SIGMA RIDE app sharing options to let your friends and teammates know about your successes. EVERYTHING AT A GLANCE Navigation information and ride data can be very easily read on the 1.77-inch transmissive colour display because of its outstanding contrast. The display is continuously lit and adjusts automatically to various lighting conditions thanks to its ambient light sensor. Do you want your display to be brighter or dimmer? No problem! As needed, you can set ten different brightness levels. The data fields in the training view can be set as you desire and highlighted in colour. Combined with the high-contrast display and the large digits, this ensures excellent legibility. SPORTY DESIGN The ROX 11.1 EVO wins over customers with its compact, modern design. It is very light at 55 grammes and fits perfectly into your cockpit. This lets you keep an eye on everything without the bike computer impairing your performance. Two colours to choose fromThe ROX 11.1 EVO is available in two colours: subtle grey or bolder white. The display is AR-coated so that it can be read easily even in the woods. READY TO GO AT A MOMENT'S NOTICE! The ROX 11.1 EVO stands out with its simple, intuitive operation. The five large buttons are easily accessible, so the bike computer is extremely easy to use even when you're wearing gloves. The simple menu navigation helps you find your way around easily, taking you right where you want to go in just a few steps. When it is started up, the device goes straight to training mode, and you can start riding. A separate menu button allows fast access to settings and functions such as workout and track navigation. The ROX 11.1 EVO emits an acoustic signal when you receive a message or a call or need to turn. TRACK NAVIGATION Plan a track with your friends! Create a track in SIGMA DATA CENTER or with a third-party provider of your choice and load it to the ROX 11.1 EVO. Within track navigation, you can see the right way to go. You can also set waypoints in track navigation – for special highlights or coffee breaks on your route. If you leave the track, the ROX sends you a notification and displays the shortest route back to it. The track view zooms automatically with your speed so that you are never surprised by a curve. If you leave the track, the zoom level is increased automatically so that you can always see the track and find your way back to it quickly. NAVIGATION WITH KOMOOT Connect your ROX 11.1 EVO with your komoot app, start your tour in the app, and put your smart phone in your pocket. komoot navigation instructions are displayed on the ROX 11.1 EVO. INDOOR CYCLING TREND Are you up for some indoor training? Connect the ROX 11.1 EVO to your smart trainer or stationary bicycle trainer. This lets you use the numerous training computer features during indoor training as well. EASY COUPLING BLE and ANT+ make it extremely easy to fluidly and reliably combine sensors that measure speed, cadence, and pulse. You can get the ROX 11.1 EVO in a set with our new magnet-free speed and cadence sensors (which are also available as accessories). Your ROX 11.1 EVO can also be coupled to your electronic switching or the power meter. Speed measurement SRAM eTap compatible Cadence measurement Shimano Di2 compatible Heart rate measurement Smart Trainer (ANT+) Watt measurement with power meter E-BIKE READY? SURE THING! The ROX 11.1 EVO is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you specific values such as the remaining ride range, battery charge, and support level. EXPERIENCE IT LIVE! Record your data with the bike computer and analyse them right away with the SIGMA RIDE app's LIVE screen. You can set your individual training views extremely easily while you're riding or use one of the pre-programmed views. SAFETY FIRST The ROX 11.1 EVO automatically detects a fall and gives you 30 seconds to confirm that you're OK. If there is no confirmation, the SIGMA RIDE app automatically sends an SMS to your emergency contacts and gives them your GPS data. You can also save emergency information such as blood type, name, and medication to your device. If there is an emergency, this information will appear on your display. STAY CONNECTED! Smart notifications connect your smartphone to the ROX 11.1 EVO even when you're riding. Notifications of incoming calls, messages, and e-mails appear automatically on your display. You can even read short messages directly on your ROX 11.1 EVO. If you need quiet while you're riding, you can disable sounds or smart notifications.

Whether you are trying for a best time, maintaining your fitness level, or just want to share your tours with friends and family, the ROX 11.1 EVO bike computer is your perfect training partner for indoor and outdoor training. In addition to its many training functions, the GPS bike computer offers navigation, structured workouts, and connection to external sensors. This allows you to focus entirely on your performance – the ROX 11.1 EVO does the rest. The LIVE function allows you to analyse your training data at any time with the SIGMA RIDE app. FIRST-CLASS FUNCTIONS The bike computer's 150 functions reliably support and guide you when you are training or on a ride with your friends. The ROX 11.1 EVO delivers all data reliably and in real time. The scope of function includes tracking speed and distance with GPS, barometric altitude measurement and navigation with Track or komoot, and compatibility with e-bikes and external sensors. The integrated Crash Alert feature informs your emergency contacts if you fall off your bike. Smart notifications inform you of incoming calls and messages during your ride. Create workouts using the service of your choice and import them in FIT format into your ROX 11.1 EVO. YOUR PERSONAL PROFILE Your freedom knows no bounds. Four of up to 20 possible sport profiles are already pre-installed on the ROX 11.1 EVO. Create your own sport profile and use the ROX 11.1 on different bikes. Six different training views with one to six data fields can be highlighted in colour with the SIGMA RIDE app, with a configuration tailored entirely to you. This lets you keep an eye on your personal goals. Screens for komoot workout, track, and navigation are also installed. An additional data page can be called up for connected FE-C smart trainers. Connect your ROX with a smart phone and track your performances right away on the SIGMA RIDE app Live Screen. YOUR SPORT PROFILES Up to 20 different sport profiles, such as road bike and mountain bike, can be installed and called up on the ROX 11.1 EVO. CUSTOMIZATION Design your personal cockpit and select individually how many and what values should be shown on your display. COLOURED DATA FIELDS The individual data fields can be highlighted in up to eight different colours, allowing a better overview and quicker readability. COMPREHENSIVE DATA COLLECTION How long, how fast, how high? Save up to 100 hours of riding time on your ROX 11.1 EVO to keep an eye on your values at all times. Analyse your performance quickly on the ROX 11.1 EVO or the SIGMA RIDE app's Live Screen. After training, the SIGMA DATA CENTER is, of course, available to you on your PC or Mac. There, you can analyse your data in more detail and plan tracks. Compare your training values, check out your progress, and use the workouts to control your individual training. Use the many SIGMA RIDE app sharing options to let your friends and teammates know about your successes. EVERYTHING AT A GLANCE Navigation information and ride data can be very easily read on the 1.77-inch transmissive colour display because of its outstanding contrast. The display is continuously lit and adjusts automatically to various lighting conditions thanks to its ambient light sensor. Do you want your display to be brighter or dimmer? No problem! As needed, you can set ten different brightness levels. The data fields in the training view can be set as you desire and highlighted in colour. Combined with the high-contrast display and the large digits, this ensures excellent legibility. SPORTY DESIGN The ROX 11.1 EVO wins over customers with its compact, modern design. It is very light at 55 grammes and fits perfectly into your cockpit. This lets you keep an eye on everything without the bike computer impairing your performance. Two colours to choose fromThe ROX 11.1 EVO is available in two colours: subtle grey or bolder white. The display is AR-coated so that it can be read easily even in the woods. READY TO GO AT A MOMENT'S NOTICE! The ROX 11.1 EVO stands out with its simple, intuitive operation. The five large buttons are easily accessible, so the bike computer is extremely easy to use even when you're wearing gloves. The simple menu navigation helps you find your way around easily, taking you right where you want to go in just a few steps. When it is started up, the device goes straight to training mode, and you can start riding. A separate menu button allows fast access to settings and functions such as workout and track navigation. The ROX 11.1 EVO emits an acoustic signal when you receive a message or a call or need to turn. TRACK NAVIGATION Plan a track with your friends! Create a track in SIGMA DATA CENTER or with a third-party provider of your choice and load it to the ROX 11.1 EVO. Within track navigation, you can see the right way to go. You can also set waypoints in track navigation – for special highlights or coffee breaks on your route. If you leave the track, the ROX sends you a notification and displays the shortest route back to it. The track view zooms automatically with your speed so that you are never surprised by a curve. If you leave the track, the zoom level is increased automatically so that you can always see the track and find your way back to it quickly. NAVIGATION WITH KOMOOT Connect your ROX 11.1 EVO with your komoot app, start your tour in the app, and put your smart phone in your pocket. komoot navigation instructions are displayed on the ROX 11.1 EVO. INDOOR CYCLING TREND Are you up for some indoor training? Connect the ROX 11.1 EVO to your smart trainer or stationary bicycle trainer. This lets you use the numerous training computer features during indoor training as well. EASY COUPLING BLE and ANT+ make it extremely easy to fluidly and reliably combine sensors that measure speed, cadence, and pulse. You can get the ROX 11.1 EVO in a set with our new magnet-free speed and cadence sensors (which are also available as accessories). Your ROX 11.1 EVO can also be coupled to your electronic switching or the power meter. Speed measurement SRAM eTap compatible Cadence measurement Shimano Di2 compatible Heart rate measurement Smart Trainer (ANT+) Watt measurement with power meter E-BIKE READY? SURE THING! The ROX 11.1 EVO is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you specific values such as the remaining ride range, battery charge, and support level. EXPERIENCE IT LIVE! Record your data with the bike computer and analyse them right away with the SIGMA RIDE app's LIVE screen. You can set your individual training views extremely easily while you're riding or use one of the pre-programmed views. SAFETY FIRST The ROX 11.1 EVO automatically detects a fall and gives you 30 seconds to confirm that you're OK. If there is no confirmation, the SIGMA RIDE app automatically sends an SMS to your emergency contacts and gives them your GPS data. You can also save emergency information such as blood type, name, and medication to your device. If there is an emergency, this information will appear on your display. STAY CONNECTED! Smart notifications connect your smartphone to the ROX 11.1 EVO even when you're riding. Notifications of incoming calls, messages, and e-mails appear automatically on your display. You can even read short messages directly on your ROX 11.1 EVO. If you need quiet while you're riding, you can disable sounds or smart notifications.

Whether you are trying for a best time, maintaining your fitness level, or just want to share your tours with friends and family, the ROX 11.1 EVO bike computer is your perfect training partner for indoor and outdoor training. In addition to its many training functions, the GPS bike computer offers navigation, structured workouts, and connection to external sensors. This allows you to focus entirely on your performance – the ROX 11.1 EVO does the rest. The LIVE function allows you to analyse your training data at any time with the SIGMA RIDE app. FIRST-CLASS FUNCTIONS The bike computer's 150 functions reliably support and guide you when you are training or on a ride with your friends. The ROX 11.1 EVO delivers all data reliably and in real time. The scope of function includes tracking speed and distance with GPS, barometric altitude measurement and navigation with Track or komoot, and compatibility with e-bikes and external sensors. The integrated Crash Alert feature informs your emergency contacts if you fall off your bike. Smart notifications inform you of incoming calls and messages during your ride. Create workouts using the service of your choice and import them in FIT format into your ROX 11.1 EVO. YOUR PERSONAL PROFILE Your freedom knows no bounds. Four of up to 20 possible sport profiles are already pre-installed on the ROX 11.1 EVO. Create your own sport profile and use the ROX 11.1 on different bikes. Six different training views with one to six data fields can be highlighted in colour with the SIGMA RIDE app, with a configuration tailored entirely to you. This lets you keep an eye on your personal goals. Screens for komoot workout, track, and navigation are also installed. An additional data page can be called up for connected FE-C smart trainers. Connect your ROX with a smart phone and track your performances right away on the SIGMA RIDE app Live Screen. YOUR SPORT PROFILES Up to 20 different sport profiles, such as road bike and mountain bike, can be installed and called up on the ROX 11.1 EVO. CUSTOMIZATION Design your personal cockpit and select individually how many and what values should be shown on your display. COLOURED DATA FIELDS The individual data fields can be highlighted in up to eight different colours, allowing a better overview and quicker readability. COMPREHENSIVE DATA COLLECTION How long, how fast, how high? Save up to 100 hours of riding time on your ROX 11.1 EVO to keep an eye on your values at all times. Analyse your performance quickly on the ROX 11.1 EVO or the SIGMA RIDE app's Live Screen. After training, the SIGMA DATA CENTER is, of course, available to you on your PC or Mac. There, you can analyse your data in more detail and plan tracks. Compare your training values, check out your progress, and use the workouts to control your individual training. Use the many SIGMA RIDE app sharing options to let your friends and teammates know about your successes. EVERYTHING AT A GLANCE Navigation information and ride data can be very easily read on the 1.77-inch transmissive colour display because of its outstanding contrast. The display is continuously lit and adjusts automatically to various lighting conditions thanks to its ambient light sensor. Do you want your display to be brighter or dimmer? No problem! As needed, you can set ten different brightness levels. The data fields in the training view can be set as you desire and highlighted in colour. Combined with the high-contrast display and the large digits, this ensures excellent legibility. SPORTY DESIGN The ROX 11.1 EVO wins over customers with its compact, modern design. It is very light at 55 grammes and fits perfectly into your cockpit. This lets you keep an eye on everything without the bike computer impairing your performance. Two colours to choose fromThe ROX 11.1 EVO is available in two colours: subtle grey or bolder white. The display is AR-coated so that it can be read easily even in the woods. READY TO GO AT A MOMENT'S NOTICE! The ROX 11.1 EVO stands out with its simple, intuitive operation. The five large buttons are easily accessible, so the bike computer is extremely easy to use even when you're wearing gloves. The simple menu navigation helps you find your way around easily, taking you right where you want to go in just a few steps. When it is started up, the device goes straight to training mode, and you can start riding. A separate menu button allows fast access to settings and functions such as workout and track navigation. The ROX 11.1 EVO emits an acoustic signal when you receive a message or a call or need to turn. TRACK NAVIGATION Plan a track with your friends! Create a track in SIGMA DATA CENTER or with a third-party provider of your choice and load it to the ROX 11.1 EVO. Within track navigation, you can see the right way to go. You can also set waypoints in track navigation – for special highlights or coffee breaks on your route. If you leave the track, the ROX sends you a notification and displays the shortest route back to it. The track view zooms automatically with your speed so that you are never surprised by a curve. If you leave the track, the zoom level is increased automatically so that you can always see the track and find your way back to it quickly. NAVIGATION WITH KOMOOT Connect your ROX 11.1 EVO with your komoot app, start your tour in the app, and put your smart phone in your pocket. komoot navigation instructions are displayed on the ROX 11.1 EVO. INDOOR CYCLING TREND Are you up for some indoor training? Connect the ROX 11.1 EVO to your smart trainer or stationary bicycle trainer. This lets you use the numerous training computer features during indoor training as well. EASY COUPLING BLE and ANT+ make it extremely easy to fluidly and reliably combine sensors that measure speed, cadence, and pulse. You can get the ROX 11.1 EVO in a set with our new magnet-free speed and cadence sensors (which are also available as accessories). Your ROX 11.1 EVO can also be coupled to your electronic switching or the power meter. Speed measurement SRAM eTap compatible Cadence measurement Shimano Di2 compatible Heart rate measurement Smart Trainer (ANT+) Watt measurement with power meter E-BIKE READY? SURE THING! The ROX 11.1 EVO is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you specific values such as the remaining ride range, battery charge, and support level. EXPERIENCE IT LIVE! Record your data with the bike computer and analyse them right away with the SIGMA RIDE app's LIVE screen. You can set your individual training views extremely easily while you're riding or use one of the pre-programmed views. SAFETY FIRST The ROX 11.1 EVO automatically detects a fall and gives you 30 seconds to confirm that you're OK. If there is no confirmation, the SIGMA RIDE app automatically sends an SMS to your emergency contacts and gives them your GPS data. You can also save emergency information such as blood type, name, and medication to your device. If there is an emergency, this information will appear on your display. STAY CONNECTED! Smart notifications connect your smartphone to the ROX 11.1 EVO even when you're riding. Notifications of incoming calls, messages, and e-mails appear automatically on your display. You can even read short messages directly on your ROX 11.1 EVO. If you need quiet while you're riding, you can disable sounds or smart notifications.

Whether you are trying for a best time, maintaining your fitness level, or just want to share your tours with friends and family, the ROX 11.1 EVO bike computer is your perfect training partner for indoor and outdoor training. In addition to its many training functions, the GPS bike computer offers navigation, structured workouts, and connection to external sensors. This allows you to focus entirely on your performance – the ROX 11.1 EVO does the rest. The LIVE function allows you to analyse your training data at any time with the SIGMA RIDE app. FIRST-CLASS FUNCTIONS The bike computer's 150 functions reliably support and guide you when you are training or on a ride with your friends. The ROX 11.1 EVO delivers all data reliably and in real time. The scope of function includes tracking speed and distance with GPS, barometric altitude measurement and navigation with Track or komoot, and compatibility with e-bikes and external sensors. The integrated Crash Alert feature informs your emergency contacts if you fall off your bike. Smart notifications inform you of incoming calls and messages during your ride. Create workouts using the service of your choice and import them in FIT format into your ROX 11.1 EVO. YOUR PERSONAL PROFILE Your freedom knows no bounds. Four of up to 20 possible sport profiles are already pre-installed on the ROX 11.1 EVO. Create your own sport profile and use the ROX 11.1 on different bikes. Six different training views with one to six data fields can be highlighted in colour with the SIGMA RIDE app, with a configuration tailored entirely to you. This lets you keep an eye on your personal goals. Screens for komoot workout, track, and navigation are also installed. An additional data page can be called up for connected FE-C smart trainers. Connect your ROX with a smart phone and track your performances right away on the SIGMA RIDE app Live Screen. YOUR SPORT PROFILES Up to 20 different sport profiles, such as road bike and mountain bike, can be installed and called up on the ROX 11.1 EVO. CUSTOMIZATION Design your personal cockpit and select individually how many and what values should be shown on your display. COLOURED DATA FIELDS The individual data fields can be highlighted in up to eight different colours, allowing a better overview and quicker readability. COMPREHENSIVE DATA COLLECTION How long, how fast, how high? Save up to 100 hours of riding time on your ROX 11.1 EVO to keep an eye on your values at all times. Analyse your performance quickly on the ROX 11.1 EVO or the SIGMA RIDE app's Live Screen. After training, the SIGMA DATA CENTER is, of course, available to you on your PC or Mac. There, you can analyse your data in more detail and plan tracks. Compare your training values, check out your progress, and use the workouts to control your individual training. Use the many SIGMA RIDE app sharing options to let your friends and teammates know about your successes. EVERYTHING AT A GLANCE Navigation information and ride data can be very easily read on the 1.77-inch transmissive colour display because of its outstanding contrast. The display is continuously lit and adjusts automatically to various lighting conditions thanks to its ambient light sensor. Do you want your display to be brighter or dimmer? No problem! As needed, you can set ten different brightness levels. The data fields in the training view can be set as you desire and highlighted in colour. Combined with the high-contrast display and the large digits, this ensures excellent legibility. SPORTY DESIGN The ROX 11.1 EVO wins over customers with its compact, modern design. It is very light at 55 grammes and fits perfectly into your cockpit. This lets you keep an eye on everything without the bike computer impairing your performance. Two colours to choose fromThe ROX 11.1 EVO is available in two colours: subtle grey or bolder white. The display is AR-coated so that it can be read easily even in the woods. READY TO GO AT A MOMENT'S NOTICE! The ROX 11.1 EVO stands out with its simple, intuitive operation. The five large buttons are easily accessible, so the bike computer is extremely easy to use even when you're wearing gloves. The simple menu navigation helps you find your way around easily, taking you right where you want to go in just a few steps. When it is started up, the device goes straight to training mode, and you can start riding. A separate menu button allows fast access to settings and functions such as workout and track navigation. The ROX 11.1 EVO emits an acoustic signal when you receive a message or a call or need to turn. TRACK NAVIGATION Plan a track with your friends! Create a track in SIGMA DATA CENTER or with a third-party provider of your choice and load it to the ROX 11.1 EVO. Within track navigation, you can see the right way to go. You can also set waypoints in track navigation – for special highlights or coffee breaks on your route. If you leave the track, the ROX sends you a notification and displays the shortest route back to it. The track view zooms automatically with your speed so that you are never surprised by a curve. If you leave the track, the zoom level is increased automatically so that you can always see the track and find your way back to it quickly. NAVIGATION WITH KOMOOT Connect your ROX 11.1 EVO with your komoot app, start your tour in the app, and put your smart phone in your pocket. komoot navigation instructions are displayed on the ROX 11.1 EVO. INDOOR CYCLING TREND Are you up for some indoor training? Connect the ROX 11.1 EVO to your smart trainer or stationary bicycle trainer. This lets you use the numerous training computer features during indoor training as well. EASY COUPLING BLE and ANT+ make it extremely easy to fluidly and reliably combine sensors that measure speed, cadence, and pulse. You can get the ROX 11.1 EVO in a set with our new magnet-free speed and cadence sensors (which are also available as accessories). Your ROX 11.1 EVO can also be coupled to your electronic switching or the power meter. Speed measurement SRAM eTap compatible Cadence measurement Shimano Di2 compatible Heart rate measurement Smart Trainer (ANT+) Watt measurement with power meter E-BIKE READY? SURE THING! The ROX 11.1 EVO is e-bike-ready and can be easily connected to many e-bikes. Your GPS bike computer establishes a connection to the compatible e-bike system and shows you specific values such as the remaining ride range, battery charge, and support level. EXPERIENCE IT LIVE! Record your data with the bike computer and analyse them right away with the SIGMA RIDE app's LIVE screen. You can set your individual training views extremely easily while you're riding or use one of the pre-programmed views. SAFETY FIRST The ROX 11.1 EVO automatically detects a fall and gives you 30 seconds to confirm that you're OK. If there is no confirmation, the SIGMA RIDE app automatically sends an SMS to your emergency contacts and gives them your GPS data. You can also save emergency information such as blood type, name, and medication to your device. If there is an emergency, this information will appear on your display. STAY CONNECTED! Smart notifications connect your smartphone to the ROX 11.1 EVO even when you're riding. Notifications of incoming calls, messages, and e-mails appear automatically on your display. You can even read short messages directly on your ROX 11.1 EVO. If you need quiet while you're riding, you can disable sounds or smart notifications.