Shopping basket

Your shopping basket is empty

Filter

  • show 13 more

Bottom Bracket Adapters

53 items

  • BOTTOM BRACKET ADAPTER BB30 (BB30 -> SHIMANO 24MM)

    The BB30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin.
    In stock
  • Wheels - Mfg Bottom Bracket Adapter for BB30 Sram / TruVativ 22 /24 MM

    The BB30-SRAM adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin.
    In stock
  • Shimano - BB71 Race Press Fit Bottem Bracket Adapter 41MM 89.5 / 92MM

    In stock
  • Shimano - BB71 MTB Press Fit Bottem Bracket Adapter 41MM 89.5 / 92MM

    In stock
  • BB ADAPTER PRESS FIT 30 (PF30 -> SHIMANO 24MM)

    The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 adapter shims and a 14-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    In stock
  • BB ADAPTER BB30 (BB30 -> CAMPA 24MM)

    BB30-CAMP adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. Note: The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle. Machined engineering-grade Delrin. 48g/pr.
    In stock
  • BB ADAPTER BBRIGHT BBRIGHT/BB30A/PF30A -> SHIMANO 24MM

    Adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight™, BB30A and Press fit 30A frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. Includes eight 0.7mm shims for fine-tuning chain line. Machined engineering-grade Delrin. 48g/pr.
    In stock
  • BB MULTI ADAPTER BB/PF30 BB/PF30 (SRAM COMPATIBLE)

    Out of stock
  • BB ADAPTER PF30 -> OUTBOARD SRAM

    Install 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle cranksets (SRAM, Truvativ, Etc.). No adapters needed. Packaged for retail display.
    In stock
  • BB ADAPTER PF30 -> OUTBOARD SHIMANO

    Install 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle cranksets (Shimano, FSA, Etc.). No adapters needed. Packaged for retail display.
    In stock
  • BB ADAPTER BBRIGHT -> SRAM

    For adapting 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight™ frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. Includes eight 0.7mm shims for fine-tuning chain line. Machined engineering-grade Delrin. 48g/pr.
    In stock
  • BB ADAPTER 386EVO -> SHIMANO

    For adapting Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 - 24mm ID adapters. Includes 8 - .7mm spacers. Machined engineering-grade Delrin. 48g/pr.
    In stock
  • BOTTOM BRACKET BSA -> 30MM CRANKS - CERAMIC - BLAC

    BSA threaded Ceramic Hybrid BB for use with 30mm diameter cranks with a spindle length of at least 115mm. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro Ceramic Hybrid bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current BB30 Wide 30mm spindle (BB30a, 386EVO, Rotor 3D+, SRAM ) cranksets. Packaged for retail display
    Out of stock
  • BOTTOM BRACKET BSA -> 30MM CRANKS - ABEC-3 - BLACK

    BSA threaded ABEC-3 BB for use with 30mm diameter cranks with a spindle length of at least 115mm. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro ABEC-3 bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current BB30 Wide 30mm spindle (BB30a, 386EVO, Rotor 3D+, SRAM ) cranksets. Packaged for retail display.
    In stock
  • BB ADAPTER BB30/PF30 -> SHIMANO

    The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 adapter shims and a 14-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    In stock
  • BOTTOM BRACKET BSA -> 30MM CRANKS - ACB - BLACK

    BSA threaded Angular Contact BB for use with 30mm diameter cranks with a spindle length of at least 115mm. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current BB30 Wide 30mm spindle (BB30a, 386EVO, Rotor 3D+, SRAM ) cranksets. Packaged for retail display.
    In stock
  • BOTTOM BRACKET BB30 -> SHIMANO 24MM - ACB - BLACK

    Wheels Manufacturing’s BB30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into BB30 frames without the need for any adapters. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm (Shimano, FSA, Etc.) cranksets. Packaged for retail display.
    In stock
  • BB ADAPTER PRESSFIT 30 -> SHIMANO/FSA

    The PF30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin. 48g/pr. NOTES: PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use our BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter.
    Out of stock
  • BB ADAPTER 386EVO -> SRAM

    For adapting SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 1 - 24mm ID adapter (for right-side). Includes 1 - 22mm ID adapter (for left-side). Includes 8 - .7mm spacers. Machined engineering-grade Delrin. 48g/pr.
    In stock
  • BOTTOM BRACKET BB30 -> SRAM 22/24MM - ABEC-3 - BLA

    Install 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle cranksets (SRAM, Truvativ, Etc.). No adapters needed. Packaged for retail display.
    In stock
  • BOTTOM BRACKET PF30 -> SHIMANO 24MM - ACB - BLACK

    Install 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle cranksets (Shimano, FSA, etc.). No adapters needed. Packaged for retail display.
    In stock
  • BOTTOM BRACKET BB30 -> SRAM 22/24MM - ABEC-3/5 ACB

    Install 24/22mm (SRAM, Truvativ, Etc.) cranks into BB30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 5 Angular Contact sealed bearing in drive side cup. Enduro ABEC 3 sealed bearing in non-drive side cup. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm (SRAM, Truvativ, Etc.) cranks. No adapters needed. Packaged for retail display.
    In stock
  • BOTTOM BRACKET BBRIGHT -> SRAM 22/24MM - ABEC-3 -

    BBRight™ Outboard ABEC-3 BB for use with 24/22mm spindle (SRAM) cranks. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro ABEC-3 bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle (SRAM) cranksets. Packaged for retail display. Note: Wheels Mfg BBRight™ Outboard BB for use with 24/22mm spindle cranks will not work with Quarq SRAM/GXP cranksets (SRAM S975, SRAM S2275, CinQo Saturn, Saturn2). If your Quarq spider has an ID less than 49.5mm, it will not fit over our BBRIGHT-OUT cup.
    In stock
  • BOTTOM BRACKET BB30 -> SHIMANO 24MM - ABEC-3 - BLA

    Wheels Manufacturing’s BB30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into BB30 frames without the need for any adapters. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC-3 bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm (Shimano, FSA, Etc.) cranksets. Packaged for retail display.
    In stock