Integrated headset for DCR (Deda internal cable routing) system and compatible with Vinci, Alanera and Superbox stem. It allows the full integration of the cables through the headset bearing. The DCR system works with a standard tapered fork steerer (1-1/8" - 1.5"), but requires a 52mm (1.5") upper headset bearing od. The special compression ring design leaves room for the cables to fit the gap in between the headset bearing and the fork. The DCR topcover for Alanera and Superbox is included in the kit sold with the product.
Integrated headset for 1 1/8” – 1 1/4” tapered road or MTB forks with superior ACB steel bearings. Compatible with innovative Deda H.S.S. system (Headset Stack Spacers) that allows to mount spacers directly over the headtube. With alloy top cover.
Integrated headset for 1 1/8” – 1.5” tapered road or MTB forks with superior ACB stainless steel bearings. Compatible with innovative Deda H.S.S. system (Headset Stack Spacers) that allows to mount spacers directly over the headtube. With alloy top cover.
To avoid damaging the carbon steerer tube expanders are the ideal component to install and adjust the headset. Screwing the bolt clamps the expander into the steerer tube. Screwing down the topcap until the headset is properly adjusted. This expander is provided with a spherical topcap and has a length of 50mm.
To avoid damaging the carbon steerer tube expanders are the ideal component to install and adjust the headset. Screwing the bolt clamps the expander into the steerer tube. Screwing down the topcap until the headset is properly adjusted. This expander is provided with a flat topcap and has a length of 50mm.
To avoid damaging the carbon steerer tube expanders are the ideal component to install and adjust the headset. Screwing the bolt clamps the expander into the steerer tube. Screwing down the topcap until the headset is properly adjusted. This expander is provided with a spherical topcap and has a length of 65mm.
To avoid damaging the carbon steerer tube expanders are the ideal component to install and adjust the headset. Screwing the bolt clamps the expander into the steerer tube. Screwing down the topcap until the headset is properly adjusted. This expander is provided with a flat topcap and has a length of 65mm.
Compression system for a-head set. Expander with long sleeve to guarantee an improved and safe tightening of the fork. Perfect for all carbon forks steerer. New magnetic top cap system to hide the expander screw and allow a more clean design. Fits 1 1/8" forks steerer with 23.5 to 25.5 mm I.D.
Deda created the new Classic® headset series to fit solutions in titanium, steel and alloy modern bicycle frames. The Classic 1 model is designed to fit 44mm i.d. headtube with an external lower cup for 1.5" tapered steerer fork combined with a 1-1/8''semi-integrated upper. The headset comes with a luxury black or silver polish finish to match any frame color.