Bike7 - Lube Oil 150ML
Reduces friction for smoother shifting and longer transmission life. Protects the chain against corrosion and can be used in all weather conditions.
In stock
Bike7 - Pro Seal 5 Liter
Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
In stock
Bike7 - Degrease 1L
Degrease is a fast acting, thorough and safe in-depth degreaser for all mechanical bicycle parts and all surfaces. Degrease removes oil, grease, tar and adhesive residues without damaging the substrate. At the same time, Degrease is safe to use on all bicycle components. It removes all kinds of oil, grease, wax, adhesive and tar residues from the bicycle frame and all moving parts. Fast and in-depth degreasing of disc and drum brakes, gear switch, bracket, front and rear derailleurs, sprocket wheel, ball head, etc. Removal of old lubricants from bearings. Removal of adhesive residues. Removal of tar and grease spatter (frame, tyres, ...). Removal of oil, silicone, wax, tar, asphalt, adhesive resisdues, etc. from stainless steel, aluminium, paint, rubber, carbon, textile, and so on. Removal of 'grease stains' on matte finish bicycle frame. Removal of all Bike7 products: Lubricate, ... . Give the product 3 minutes to work its way in before applying a lubricant. Brake disks should be blown dry before cleaning. Lubricate all moving parts with Lubricate for optimal maintenance.
In stock
Bike7 - Lube Dry 500ML
After a thorough cleaning, your bike also needs to be lubricated. Most lubricants are not pressure resistant. This means that the lubrication effect is lost as soon as it is put under pressure. So choose a durable lubrication with Lubricate. Lubricate is a transparent PTFE-based lubricant for eliminating prolonged friction. Lubricate Dry is an ultra-thin lubricant with a high penetrating power for deep lubrication. The Dry version is less sticky than Lubricate Wet. Especially for racing bikes that thend to get less dirty after a ride than e.g. mountain bikes. Suitable for dry and damp race courses. First clean the parts to be lubricated with Degrease, then dry with compressed air or let it to dry off by itself! Shake well before use. To guarantee an optimal, lasting lubrication, allow 10 minutes after use before riding.
In stock