Shopping basket

Your shopping basket is empty

Bike7 - Mount Carbon Assembly Paste 100GR

(0)

Description

Mount Carbon is used when assembling carbon parts. Mount Carbon provides such a good grip that the tightening torque can be reduced, so that there is less pressure on the assembled parts and material fatigue is delayed. Assembled parts can also be disassembled easier.

  • For assembling seat posts, steering tubes, ... .
  • Apply Mount Carbon so that contact points are fully lubricated.
  • Assemble the parts according to the prescribed tightening torque.
  • Remove excess Mount Carbon with a cloth.

Description

Mount Carbon is used when assembling carbon parts. Mount Carbon provides such a good grip that the tightening torque can be reduced, so that there is less pressure on the assembled parts and material fatigue is delayed. Assembled parts can also be disassembled easier.

  • For assembling seat posts, steering tubes, ... .
  • Apply Mount Carbon so that contact points are fully lubricated.
  • Assemble the parts according to the prescribed tightening torque.
  • Remove excess Mount Carbon with a cloth.

Out of stock

€ 13,85

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code977070924
  • EAN5414195002490
  • BrandBike7
  • ModelMOUNT CARBON
  • Type of bike
    • BMX
    • Cargo Bike
    • Chopper Bike
    • City Bike
    • Cyclocross Bike
    • E-Bike
    • Family Bike
    • Fixie
    • Folding Bike
    • Gravel Bike
    • Hybride Bike
    • Kids Bike
    • Mountainbike
    • Race Bike
    • Recumbent Bike
    • Track Bike
    • Travel Bike
    • Trekking Bike
    • Triathlon / TT
  • Net weight (g)100
  • Quantity per box6

Others also bought

  • Bike7 - Degrease 1L

    Degrease is a fast acting, thorough and safe in-depth degreaser for all mechanical bicycle parts and all surfaces. Degrease removes oil, grease, tar and adhesive residues without damaging the substrate. At the same time, Degrease is safe to use on all bicycle components. It removes all kinds of oil, grease, wax, adhesive and tar residues from the bicycle frame and all moving parts. Fast and in-depth degreasing of disc and drum brakes, gear switch, bracket, front and rear derailleurs, sprocket wheel, ball head, etc. Removal of old lubricants from bearings. Removal of adhesive residues. Removal of tar and grease spatter (frame, tyres, ...). Removal of oil, silicone, wax, tar, asphalt, adhesive resisdues, etc. from stainless steel, aluminium, paint, rubber, carbon, textile, and so on. Removal of 'grease stains' on matte finish bicycle frame. Removal of all Bike7 products: Lubricate, ... . Give the product 3 minutes to work its way in before applying a lubricant. Brake disks should be blown dry before cleaning. Lubricate all moving parts with Lubricate for optimal maintenance.
    In stock
  • Bike7 - Grease 500GR

    Most lubricants on the market are not pressure-resistant. Bike7 decided to do something about this with Grease. we developed the highest quality pressure-resistant grease on the market. This high-pressure and water-resistant lubricating grease distinguishes itself from other greases by its high adhesive strength that ensures longlasting deep lubrication. For optimal lubrication of moving parts such as the crank axle, headset, ... . First clean the parts to be lubricated with Degrease. Let it evaporate or dry with compressed air.
    In stock
  • Bike7 - Lube Oil 150ML

    Reduces friction for smoother shifting and longer transmission life. Protects the chain against corrosion and can be used in all weather conditions.
    In stock
  • Bike7 - Pro Seal 125ML

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock
  • Reviews

    Recommended accesories

    • Bike7 - Degrease 1L

      Degrease is a fast acting, thorough and safe in-depth degreaser for all mechanical bicycle parts and all surfaces. Degrease removes oil, grease, tar and adhesive residues without damaging the substrate. At the same time, Degrease is safe to use on all bicycle components. It removes all kinds of oil, grease, wax, adhesive and tar residues from the bicycle frame and all moving parts. Fast and in-depth degreasing of disc and drum brakes, gear switch, bracket, front and rear derailleurs, sprocket wheel, ball head, etc. Removal of old lubricants from bearings. Removal of adhesive residues. Removal of tar and grease spatter (frame, tyres, ...). Removal of oil, silicone, wax, tar, asphalt, adhesive resisdues, etc. from stainless steel, aluminium, paint, rubber, carbon, textile, and so on. Removal of 'grease stains' on matte finish bicycle frame. Removal of all Bike7 products: Lubricate, ... . Give the product 3 minutes to work its way in before applying a lubricant. Brake disks should be blown dry before cleaning. Lubricate all moving parts with Lubricate for optimal maintenance.
      In stock
    • BIKE7 CLEAN 5L

      Cleaning your bike after every ride can be a tedious affair. But with the right products you can do it in no time at all and even enjoy cleaning your bike. Good maintenance is indeed essential for keeping it in good condition. Clean has been specially developed to make this as easy as possible. You see the difference straight away. Quick and thorough cleaning of the handlebars, frame, fork, click-in pedals, wheels, ... . Removal of dried dirt, sweat, sand, dust, etc. from stainless steel, aluminium, titanium, lacquer, rubber, carbon fibre, ... . Lubricate all moving parts with Lubricate for optimal maintenance. Use an ordinary garden hose for the best result. No high pressure cleaner required.
      Out of stock
    • Bike7 - Chain Clean 5L

      Highly effective cleaner and degreaser for chains, derailleurs, cassettes and chainrings. Regular use will prolong transmission life. Apply and allow to soak in. Rinse thoroughly with water. After drying, re-lubricate chain.
      Out of stock
    • BIKE7 CHAIN CLEAN 1L + CANYON TRIGGER

      Highly effective cleaner and degreaser for chains, derailleurs, cassettes and chainrings. Regular use will prolong transmission life. Apply and allow to soak in. Rinse thoroughly with water. After drying, re-lubricate chain.
      Out of stock