Bike7 - Pro Seal Jerrrycan 5L Including Tap

Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.

Highly effective cleaner and degreaser for chains, derailleurs, cassettes and chainrings. Regular use will prolong transmission life. Apply and allow to soak in. Rinse thoroughly with water. After drying, re-lubricate chain.

Made in the USA. Anodized black, machined aluminum shell. Enduro 6806 OS (30mm ID) ABEC 3 sealed bearings. 12% increase in static load rating compared to standard 6806 bearings. Dual silicone seal keeps the contamination out for longer life. Adaptable BB to fit PressFit 30 specific frames (46mm ID) with shell widths from 61mm to 86.5mm. Will accept current 30mm spindle cranksets, as well as 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims. Packaged for retail display.

Solvent-free wax emulsion for optimal chain lubrication, precise shifting and noiseless transmission. Easy longterm maintenance. Apply to clean, dry chain. Clean if necessary with Degrease and Clean, rinse and dry. Apply two layers of Pro Wax to the inside of the entire chain, leaving 3 hours between applications. Maintenance: wipe the chain with a cloth, apply a layer of Pro Wax and allow to dry. After 600 km: see point 1. Drying time depends on ambient temperature and air humidity.