Shopping basket

Your shopping basket is empty

Bike7 - Brake Cleaner 500ML
Bike7 - Brake Cleaner 500ML

Bike7 - Brake Cleaner 500ML

(0)

Description

Removes dirt, oil and brake fluid from the brake blocks, callipers and disks for optimal safety.

  1. Spray onto surface.
  2. Allow to penetrate.
  3. Spray off loose dirt with the powerful Brake Cleaner spray and/or rub clean.

Description

Removes dirt, oil and brake fluid from the brake blocks, callipers and disks for optimal safety.

  1. Spray onto surface.
  2. Allow to penetrate.
  3. Spray off loose dirt with the powerful Brake Cleaner spray and/or rub clean.

In stock

€ 10,97

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code977140924
  • EAN5414195004173
  • BrandBike7
  • ModelBRAKE CLEANER
  • Type of bike
    • BMX
    • Cargo Bike
    • Chopper Bike
    • City Bike
    • Cyclocross Bike
    • E-Bike
    • Family Bike
    • Fixie
    • Folding Bike
    • Gravel Bike
    • Hybride Bike
    • Kids Bike
    • Mountainbike
    • Race Bike
    • Recumbent Bike
    • Travel Bike
    • Trekking Bike
    • Triathlon / TT
  • Volume (ml)500
  • Quantity per box12

Others also bought

  • Bike7 - E-Protect 500ML
    FEATURES Odorless and colorless maintenance of bicycles. Quick cleaning of bicycles: E-Protect dissolves dirt (even tar stains), so that it is easy to remove (remove thick layers of mud with running water first). Lubricating bicycles: E-Protect provides the necessary lubrication for all small parts, even the frame lock. Protecting bicycles: E-Protect protects against dirt and makes subsequent cleaning easy. In addition, E-Protect cleans all electrical parts, removes oxidation and protects all electrical parts against corrosion and moisture and thus ensures optimal electrical conductivity. WHY USE E-PROTECT Maintenance of electrical contacts: cleans and protects.Lubrication of small parts such as pivot points, fork legs, axles and wheels of the derailleur, brake levers, locks,.... INSTRUCTIONS Cleaning a bike without water Protect the brake discs with a microfiber cloth.Treat the bike completely (except brake discs). Allow to act and polish with slightly damp microfiber cloth. Lubricate bicycle parts Spray E-Protect on all moving partsRub off the excess. Use Bike7 Lubricate or Bike7 Pro Wax to lubricate the chain. Cleaning of electrical contacts Apply E-Protect, let it act for a while and slide the plug in and out a few times. Spray E-Protect into the plug to remove the loosened oxidation and protect the contacts. Wait a moment and slide the plugs back together. Protection of electrical contacts Open the plug and spray E-Protect on both sides. Wait a moment and slide the plugs back together. Also treat the battery contacts.
    In stock

    € 17,94

  • Bike7 - Pro Wax 150ML
    Solvent-free wax emulsion for optimal chain lubrication, precise shifting and noiseless transmission. Easy longterm maintenance. Apply to clean, dry chain. Clean if necessary with Degrease and Clean, rinse and dry. Apply two layers of Pro Wax to the inside of the entire chain, leaving 3 hours between applications. Maintenance: wipe the chain with a cloth, apply a layer of Pro Wax and allow to dry. After 600 km: see point 1. Drying time depends on ambient temperature and air humidity.
    In stock

    € 15,95

  • Bike7 - Pro Seal 125ML
    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock

    € 10,85

  • Bike7 - Lube Oil 150ML
    Reduces friction for smoother shifting and longer transmission life. Protects the chain against corrosion and can be used in all weather conditions.
    In stock

    € 13,90

    • Reviews

    Recommended accesories

    • Bike7 - E-Protect 500ML
      FEATURES Odorless and colorless maintenance of bicycles. Quick cleaning of bicycles: E-Protect dissolves dirt (even tar stains), so that it is easy to remove (remove thick layers of mud with running water first). Lubricating bicycles: E-Protect provides the necessary lubrication for all small parts, even the frame lock. Protecting bicycles: E-Protect protects against dirt and makes subsequent cleaning easy. In addition, E-Protect cleans all electrical parts, removes oxidation and protects all electrical parts against corrosion and moisture and thus ensures optimal electrical conductivity. WHY USE E-PROTECT Maintenance of electrical contacts: cleans and protects.Lubrication of small parts such as pivot points, fork legs, axles and wheels of the derailleur, brake levers, locks,.... INSTRUCTIONS Cleaning a bike without water Protect the brake discs with a microfiber cloth.Treat the bike completely (except brake discs). Allow to act and polish with slightly damp microfiber cloth. Lubricate bicycle parts Spray E-Protect on all moving partsRub off the excess. Use Bike7 Lubricate or Bike7 Pro Wax to lubricate the chain. Cleaning of electrical contacts Apply E-Protect, let it act for a while and slide the plug in and out a few times. Spray E-Protect into the plug to remove the loosened oxidation and protect the contacts. Wait a moment and slide the plugs back together. Protection of electrical contacts Open the plug and spray E-Protect on both sides. Wait a moment and slide the plugs back together. Also treat the battery contacts.
      In stock

      € 17,94