Shopping basket

Your shopping basket is empty

Bike7 - Pro Seal 1 Liter
Bike7 - Pro Seal 1 Liter

Bike7 - Pro Seal 1 Liter

(0)

Description

Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the re... Read more

Description

Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair.

  • Can be used in both "Tubeless" and "Tubeless ready" tires.
  • Closes holes up to 8mm.
  • Compatible with CO2 cartridges.
  • Contains natural Latex, is not corrosive or toxic.
  • Pressure resistant up to 7 bar / 100 PSI.

INSTRUCTIONS:

Disassembled tire:

New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely.

Mounted tire, with the 125 ml bottle:

Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve.

Inflate the tire:

Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure.

Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire.

A larger amount is recommended for larger tires. A larger amount of product can be used for better protection.

Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.

In stock

€ 34,45

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code977410924
  • EAN5414195014776
  • BrandBike7
  • ModelPRO SEAL
  • Type of bike
    • Triathlon / TT
    • Trekking Bike
    • Travel Bike
    • Recumbent Bike
    • Race Bike
    • Mountainbike
    • Kids Bike
    • Hybride Bike
    • Gravel Bike
    • Folding Bike
    • Fixie
    • Family Bike
    • E-Bike
    • Cyclocross Bike
    • City Bike
    • Chopper Bike
    • Cargo Bike
    • BMX
  • Volume (ml)1000

Others also bought

  • Bike7 - Brake Cleaner 500ML
    Removes dirt, oil and brake fluid from the brake blocks, callipers and disks for optimal safety. Spray onto surface. Allow to penetrate. Spray off loose dirt with the powerful Brake Cleaner spray and/or rub clean.
    In stock

    € 10,97

  • Bike7 - Pro Wax 150ML
    Solvent-free wax emulsion for optimal chain lubrication, precise shifting and noiseless transmission. Easy longterm maintenance. Apply to clean, dry chain. Clean if necessary with Degrease and Clean, rinse and dry. Apply two layers of Pro Wax to the inside of the entire chain, leaving 3 hours between applications. Maintenance: wipe the chain with a cloth, apply a layer of Pro Wax and allow to dry. After 600 km: see point 1. Drying time depends on ambient temperature and air humidity.
    In stock

    € 15,95

  • Bike7 - Pro Seal 125ML
    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock

    € 10,85

  • Trivio - CO2 Adapter + Cartridge 16 Grams + Neoprene
    The Trivio CO2 bicycle pump adapter incl. cartridge will always help you out! The cartridge has universal threads so that any valve adapter can be attached. With a weight of 16 grams, these cartridges provide enough pressure to get a road bike tire at the right pressure. Inflate your bicycle tire quickly and carefree with these CO2 cartridges from Trivio. Enjoy a carefree ride with a Trivio CO2 bicycle pump. This package contains an adjustable valve adapter, CO2 cartridge and a neoprene sleeve.
    In stock

    € 11,99

    • Reviews

    Description

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair.

    • Can be used in both "Tubeless" and "Tubeless ready" tires.
    • Closes holes up to 8mm.
    • Compatible with CO2 cartridges.
    • Contains natural Latex, is not corrosive or toxic.
    • Pressure resistant up to 7 bar / 100 PSI.

    INSTRUCTIONS:

    Disassembled tire:

    New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely.

    Mounted tire, with the 125 ml bottle:

    Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve.

    Inflate the tire:

    Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure.

    Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire.

    A larger amount is recommended for larger tires. A larger amount of product can be used for better protection.

    Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.