Shopping basket

Your shopping basket is empty

Bike7 - Pro Seal Jerrrycan 5L Including Tap

(0)

Description

Pro Seal is a latex emulsion that quickly seals holes in all tubeless tyres, be it mountain bike or racing tyres. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides an effective immediate repair.

  • Tubeless and tubeless ready
  • Seals holes up to 8 mm
  • Compatible with CO2 cartridges
  • Contains natural latex: non-corrosive, non-toxic and safe

Description

Pro Seal is a latex emulsion that quickly seals holes in all tubeless tyres, be it mountain bike or racing tyres. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides an effective immediate repair.

  • Tubeless and tubeless ready
  • Seals holes up to 8 mm
  • Compatible with CO2 cartridges
  • Contains natural latex: non-corrosive, non-toxic and safe

In stock

€ 128,64

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article codeBIKE7-BUN-007
  • BrandBike7
  • ModelPRO SEAL
  • Type of bike
    • BMX
    • Cargo Bike
    • Chopper Bike
    • City Bike
    • Cyclocross Bike
    • E-Bike
    • Family Bike
    • Fixie
    • Folding Bike
    • Gravel Bike
    • Hybride Bike
    • Kids Bike
    • Mountainbike
    • Race Bike
    • Recumbent Bike
    • Travel Bike
    • Trekking Bike
    • Triathlon / TT
  • Volume (ml)5000

Others also bought

  • Wheels Mfg - Bottom bracket Pressfit 30 Abec 3 Black

    Made in the USA. Anodized black, machined aluminum shell. Enduro 6806 OS (30mm ID) ABEC 3 sealed bearings. 12% increase in static load rating compared to standard 6806 bearings. Dual silicone seal keeps the contamination out for longer life. Adaptable BB to fit PressFit 30 specific frames (46mm ID) with shell widths from 61mm to 86.5mm. Will accept current 30mm spindle cranksets, as well as 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims. Packaged for retail display.
    In stock
  • Wheels Mfg - Bottom bracket adapter 386EVO Shimano

    For adapting Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 - 24mm ID adapters. Includes 8 - .7mm spacers. Machined engineering-grade Delrin. 48g/pr.
    In stock
  • Bike7 - Pro Seal 125ML

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock
  • Sale item

    Blackspire - Chainring Snaggletooth SHIMANO 96/34

    This Narrow/Wide chainring by Blackspire is suitable for use with Shimano 96 mm BCD cranks. These chainrings are CNC made from 7075-T6 aluminum for long life. Cut from 4.6mm aluminum sheet for lightweight and strength. For use with groups with 9, 10, 11 or 12 gears. Anodized in black with laser etched graphics.
    In stock
  • Reviews