Bryton - Rider 750 SE GPS bike computer

Smart Heart Rate Monitor applies both ANT+ and Bluetooth technology. It wirelessly transmits your heart rate to cycling computers and smart phones. Smart Heart Rate Monitor goes with a soft elastic strap, providing you a comfortable fit. Featuring the application of dual technology, ANT+ and Bluetooth, Smart Heart Rate Monitor is able to connect to both cycling computers and smart phones. It is compatible with most devices in the market. Accurately measure your heart beat and captures results to your device for instant feedback or later analysis on Strava, TrainingPeaks and other training sites.

With this flagship model on board, Bryton is rolling out a multitude of new premium features and 3rd-party support to fully augment the abilities of this high-end model. In addition to the Group Chat and Group Ride features, The Rider S800 leads the way with a carefully selected outdoor-tailored high contrast display and advanced navigation & workout capabilities, as well as compatibility with indoor smart trainers, rear-view bike radar, and Cycling Dynamics, and more! Wherever and whatever you ride, the Rider S800 has something for everyone.Extra-Large Crisp MIP Display Designed with the 3.4” large display, the Rider S800 utilizes MIP (Memory In Pixel) technology coupled with an internal reflection layer to be optimized for a better outdoor viewing experience without screen shadow. The extra wide MIP display with ultra narrow bezel offers both crisp, high-contrast readability and a high screen ratio, making this GPS cycle computer Bryton’s premiere device with clarity without compromise!36hr Battery LifeEmploying the MIP display and enhancements to increase efficiency, the Rider S800 low power-consumption in combination with its large battery helps to increase its overall efficiency, expanding its total battery life up to an enormous 36 hours. Without viewing map pages, the Rider S800 is able to extend its battery life to more than 40 hours of continuous use. The Rider S800 has the strength and stamina to take on any challenge, and, with on-the-go mobile charging support, you can top-up the charge to enjoy any length of journey no matter where you choose to ride!Voice SearchThe Bryton Rider S800 speaks your language! With connection to the internet, the Rider S800 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself!Advanced Routing FeaturesThe Rider S800 incorporates fully-featured navigation functions, providing turn-by-turn and route-guidance features all on pre-installed regional OSM maps. In addition to navigation, the Rider S800 supports advanced features to help you stay on track and get the most out of your rides, such as auto-rerouting, on-screen POIs,reverse saved rides, and route retracing, and with the Bryton Active app you can plan your own or sync 3rd party routes, add custom POI/Peak information to rides and more!Climb ChallengeClimb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S800 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid color climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance.Route ExploreLeave no stone unturned with the Rider S800’s new Explore feature which will help you experience and explore the world on two wheels like never before. Simply select how far you would like to ride and let the Rider S800 be your guide! Generating up to three unique routes starting from your current location, the Rider S800 will help you explore the unknown and bring you back home again.Live TrackShare your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share to any messaging app with the press of a button. Users can also opt-in for invitations to be auto-sent via email to desired contacts for added convenience. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also current speed, ride time, trip time and distance.Group Chat & Ride The Rider S800 is even more fun with friends! Using the Bryton Active app, select your track, invite your friends to a group and see live updates for group members on your route right from your device. Keep in touch, cheer on your friends or send status updates to others by using voice input to create customizable messages directly from the Rider S800. Additionally, with the Bryton Active app, setting up a group ride is as easy as a press of a button.

Rider S500 integrates a sleek and efficient hardware design, including a crisp 2.4" screen and 4 simple buttons, as well as improved software, and advanced new features including Climb Challenge, ambient light sensor, improved user interface, and customizable quick-status menu options as well as improvements to routing and workout features. Compact Design The Rider S500 features a new sleek and compact design that is optimized for pro- and novice cyclists alike. Ambient Light Sensor Using the built-in ambient light sensor, the Bryton Rider S500 can automatically adjust its backlight based on the lighting conditions around it. 24hr Battery Life Equipped with an enormous 24 hours battery, the Rider S500 has the strength and stamina to take on any challenge. Customizable Quick-Status Menu The quick status menu is viewable at any time from the meter page by simply tapping on the screen. Seamless Recording The Rider S500 allows you to continue recording where you left off, even if the device is powered off, and will resume recording once powered back on! Voice Search The Bryton Rider S500 speaks your language! With connection to the internet, the Rider S500 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself! OpenStreetMaps and Biking POI's The Rider S500 is pre-loaded with OSM (OpenStreetMaps) maps supporting improved zoom level 16 with on-screen POI's. On the device map, a large range of POI's including bike shops, hospitals, water stops, restrooms, food, etc. are displayed, and by hovering the pointer over any POI, a brief description will be shown. Additionally, the OSM maps included on the Rider S500 have been enhanced to show MTB trails and other off-road features. Advanced Routing Features When following a route and riding off-track, the Rider S500, with connection to your phone, will re-route to get back on track. Additionally, you can reverse a route to switch the start and end locations as well as retrace an ongoing ride to get you back where you started along the same path. Turn-By-Turn Navigation Whether you are exploring new regions or following a downloaded route, the Rider S500 is the perfect riding companion, providing turn-by-turn navigation and advanced guidance data, including street names (when connected to Bryton Active), POI's & Peaks (customizable in Bryton Active), distance and direction information, and more all on pre-downloaded regional OSM (OpenStreetMaps) maps. Climb Challenge | Reach New Heights Climb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S500 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid color climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance. Advanced Workout Features With a new graphical workout overview with zoom support and advanced new features, including real-time intensity adjustment, TrainingPeaks support, a new resilience workout mode and workout note features (to add notes from the Bryton Active app or TrainingPeaks), trainings on the Rider S500 just got even better! View remaining workout progress, customizable power zones on the target power page and more, all with vivid graphical representation! Indoor Smart Trainer Boasting powerful new features and with a wide range of integrations, the Rider S500 brings the thrill of the ride to your home smart trainer! With ANT+ FE-C Smart Trainer compatibility, the Bryton Rider S500 can communicate with your indoor Smart Trainer to control resistance or power (target resistance / power), simulate custom virtual workouts (Smart Workout) or even simulate a route (Virtual Ride). Experience endless possibilities from the comfort of home with Virtual Ride Simulation. Utilizing ANT+ FE-C compatibility, the Rider S500 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience. Smart Workout Easily create custom virtual workouts for smart trainers with the Rider S500 at home! Training plans can be built with the Bryton Active App and downloaded directly to the device. With ANT+ FE-C support, the Rider S500 will communicate with your smart trainer to simulate the resistance from the training plan. Ride Safe, Train at Ease Share your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share to any messaging app with the press of a button. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also current speed, ride time, trip time, distance and last updated time! Garmin Varia Radar Compatibility Utilizing a connected ANT+ Rear-View Radar System, cyclists can view vehicles coming from behind up to 150m with notifications to keep alert. The strips located on the right side of every data page will signal in various colors and give off a beeping sound to warn users of approaching traffic. Ambient Light Sensor | Adapted for any Conditions Using the built-in ambient light sensor, the Bryton Rider S500 can automatically adjust its backlight based on the lighting conditions around it. When riding indoors, passing through a tunnel, under trees, etc., the backlight will automatically become brighter to compensate, ensuring optimal screen settings anywhere and anytime you ride! Compete with worldwide riders through Rider S500 recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops/Today's Plan by pairing accounts. What's even better is the Rider S500 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.

Smart Cadence Sensor applies both ANT+ and Bluetooth technology. It wirelessly transmits your cadence data to cycling computers and smart phones. With no magnets and exposed parts to line up, it is much easier to install.