Challenge - Strada Pro Tubular 700X25C Black

Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.

We are delighted to present our new product, which is extremely suitable for the discerning cyclist. The HideMyBell raceday fi handlebar mount by Close the Gap is a must-have due to the choice of premium materials combined with minimalist looks. The option to remove the bicycle bell from the holder in an instant is unique to Close the Gap. You can enjoy even more user-friendliness by choosing to mount the clapper on the left or right. The holder is made of an extremely stiff UD carbon composite. This premium material makes it possible to design lightweight in combination with very good stiffness. Specifications Call to delete in an instant clapper of the bell left or right choice Material: UD Carbon Lightweight: only 26 + 13 grams Mounting with slotted hole for optimal position of bicycle computer Bike MOTION AWARD winner Include Adapters: Garmin, Sigma ROX (Garmin adapter) Wahoo, Bryton & Lezyne Optional accessories uni light adapter GoPro style adapter Polar adapter

The Strada by Challenge is the bike tire for long days on the road. This all-conditions tire combines a round profile that takes the sting out of rough road surfaces with a construction that offers maximum control and low rolling resistance. Use Challenge Smart Sealant for a perfect tubeless setup!