Shopping basket

Your shopping basket is empty

Cyclus - Headset Press Tool 1 1/2 Inch Oversized

(0)

Description

Headset press 1.5": With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle - trapezoidal thread spindle 360mm - press bush pair - threaded sleeve - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the ... Read more

Description

Headset press 1.5": With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle - trapezoidal thread spindle 360mm - press bush pair - threaded sleeve - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve on the trapezoidal therad of the spindle. Rotate the tool holder and start to press the head cups. Pay attention, that the cups are not getting jammed during the work. Before you begin to press the head cups, check the diameter tolerance of the cup seating in the frame. You might need to correct the size by milling and facing the steerer tube first. Use corresponding head tube facing tool (code: 720147). Tip: Put some lubricant on the head cups to be pressed. It will make the work easier and safe the tool.

In stock

€ 89,95

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code7720181
  • EAN8590831240246
  • BrandCyclus
  • Tool typeHeadset
  • Net weight (g)2630
  • KLeurnew
    • Blue
    • Silver

Others also bought

  • Trivio - Front Derailleur Clamp 34.9MM

    Assemble each model braze-on front derailleur on your frame tube. This aluminum clamp fits tube diameters of 31.8mm.
    In stock
  • Trivio - MTB Inner Tube 29X1.75/2.5 SV 42MM Presta

    Good inner tubes are essential to fully enjoy the most beautiful bike rides. The Trivio Road, Cross and MTB inner tubes are made of a high-quality butyl compound. This material ensures durability and good rolling performance.
    In stock
  • Close the Gap - Ergo My Ride XC-M Ergonomic Bike Grips

    Good ergonomics are the most important thing for every ride. We have long been fans of these innovative handles on the inside of your Close the Gap grips. Thanks to perfect ergonomics, your hands are placed comfortably ergonomically on the handlebars. This means more comfort, safety and grip. Especially with a relatively wide 29er handlebar, the 'new' position on long straights or long climbs has its strength. For the ErgoMyRide XC-M grips we work together with the Italian company Skopre, exclusive worldwide licensee from SPIRGRIPS ®. Properties: Place your wrists in an ergonomic position Improve your comfort, grip and also your aerodynamics Lightweight Swiss composite: 96 grams (set) UCI approved for MTB Clamp diameter 22.2 mm (standard MTB handlebar) Color: matte black Powered by SPIRGRIPS ® Patent: Fun G Sàrl, Genevè (CH) Made in Italy
    In stock
  • Trivio - CO2 Adapter + Cartridge 16 Grams + Neoprene

    The Trivio CO2 bicycle pump adapter incl. cartridge will always help you out! The cartridge has universal threads so that any valve adapter can be attached. With a weight of 16 grams, these cartridges provide enough pressure to get a road bike tire at the right pressure. Inflate your bicycle tire quickly and carefree with these CO2 cartridges from Trivio. Enjoy a carefree ride with a Trivio CO2 bicycle pump. This package contains an adjustable valve adapter, CO2 cartridge and a neoprene sleeve.
    In stock
  • Reviews

    Description

    Headset press 1.5": With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle - trapezoidal thread spindle 360mm - press bush pair - threaded sleeve - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve on the trapezoidal therad of the spindle. Rotate the tool holder and start to press the head cups. Pay attention, that the cups are not getting jammed during the work. Before you begin to press the head cups, check the diameter tolerance of the cup seating in the frame. You might need to correct the size by milling and facing the steerer tube first. Use corresponding head tube facing tool (code: 720147). Tip: Put some lubricant on the head cups to be pressed. It will make the work easier and safe the tool.