Shopping basket

Your shopping basket is empty

Ritchey - Handlebar MTB WCS Flat Blatte 740MM/9D 2019

(0)

Description

The 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. Triple-butted 7050 alloy construction. +/-5mm rise. Sweep: 9- or 5-degree (5-degree International markets only). Blatte finish. 236g.

Description

The 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. Triple-butted 7050 alloy construction. +/-5mm rise. Sweep: 9- or 5-degree (5-degree International markets only). Blatte finish. 236g.

Out of stock

€ 87,89

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code30455427026
  • EAN796941307734
  • BrandRitchey
  • ModelWCS
  • TypeFLAT
  • MaterialTriple butted 7050 aluminium
  • Material typeAluminum
  • Type of bikeMountainbike
  • Net weight (g)236
  • Handlebar diameter (mm)31.8
  • Back sweep (°)9
  • Handlebar width (mm)740
  • Rise (mm)5
  • FinishMatt
  • KLeurnewBlack

Others also bought

  • Ritchey - Seatpost WCS 1-Bolt Blatte 400X30.9

    Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment. Precision forged alloy clamp assembly for strength. Low-profile head for optimal saddle clearance and sleek lines. Wide saddle clamp reduces stress on lightweight saddle rails. Interchangeable clamps provide compatibility for all popular rail sizes.
    In stock
  • Ritchey - Seatpost WCS Carbon Replacement Clamps 7X7MM

    Saddle Rail Clamp outer-pieces to adapt WCS Carbon 1-bolt posts to varius saddle rail dimensions. To retrofit WCS One-Bolt Carbon Seatpost. 7x7mm, 8x8.5mm or 7x9.6mm available.
    In stock
  • Ritchey - WCS Drop-In Lower Headset 1-1/4''

    For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Integrated IS Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease.
    In stock
  • Ritchey - Seatpost WCS 1-Bolt Replacement Clamps 7X7MM

    In stock
  • Reviews

    Recommended accesories

    • Ritchey - Stem WCS C220 Blatte 73D/100MM

      You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.The WCS C220 73D Stem offers 17° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality stainless steel black bolts are used throughout. 17° of positive or negative rise 1-1/8" steerer diameter Stem body wraps 220° around bar clamping area, holding it in place for easy installation
      In stock
    • Ritchey - Stem WCS C220 Blatte 90MM

      You really can have it all—the new wcs c220 stem rivals the performance of the revolutionary c260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the ritchey trail stem, the c220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality crmo steel bolts are used throughout. Material: 3d forged 2014 alloy body, 4 x 4mm coated CrMo steel forward-facing faceplate bolts, 2 x 4mm coated CrMo steel offset steer tube clamp bolts, 5Nm torque max on all hardware, Compatible with all 31.8 bars, Press-fit clamp design installs and removes like a standard stem, Lengths: 60-130mm, Angle: 84/6 degree, Steerer Height: 42mm, Steerer: 1-1/8", Faceplate Width: 42mm, Blatte Finish, 121g (110mm).
      Out of stock
    • Ritchey - Seatpost WCS 1-Bolt Blatte 400X30.9

      Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment. Precision forged alloy clamp assembly for strength. Low-profile head for optimal saddle clearance and sleek lines. Wide saddle clamp reduces stress on lightweight saddle rails. Interchangeable clamps provide compatibility for all popular rail sizes.
      In stock
    • Ritchey - Stem WCS C220 Blatte 25D/90MM

      You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.The WCS C22 25D Stem offers 25° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. 25° of positive or negative rise 1-1/8" steerer diameter Stem body wraps 220° around bar clamping area, holding it in place for easy installation
      In stock