Shopping basket

Your shopping basket is empty

Ritchey - Stem WCS C220 Blatte 25D/100MM

(0)

Description

You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.The WCS C22 25D Stem offers 25° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no... Read more

Description

You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.
The WCS C22 25D Stem offers 25° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout.

  • 25° of positive or negative rise
  • 1-1/8" steerer diameter
  • Stem body wraps 220° around bar clamping area, holding it in place for easy installation

In stock

€ 107,90

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code31055427104
  • EAN796941318181
  • BrandRitchey
  • ModelWCS
  • Material3D forged, alloy 2014
  • Material typeAluminum
  • Net weight (g)121
  • Handlebar diameter (mm)31.8
  • Steerertube diameter1 1/8"
  • Stem length (mm)100
  • Clamp height (mm)42
  • Steerertube diameter (mm)28.6
  • Angle (°)25
  • KLeurnewBlack

Others also bought

  • Wheels Mfg - Bottom Bracket Adapter 29X42MM Open Bore

    29mm open bore adapter is used to press 29mm x 42mm (DUB Compatible) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. Will press in Wheels Mfg SRAM DUB compatible bottom bracket cups. 1/2" thru hole for use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO). Installs: 29X42 (DUB compatible) bearing Inner Step Outer Diameter: 41.8mm Outer Diameter: 28.9mm Thru Hole Diameter: 12.8mm (1/2") Thickness: 7mm Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod. Machined, red anodized aluminum Sold individually 29SRAM-OB is designed specifically to press in 6806/29 sealed bearings and will also press in Wheels Mfg SRAM DUB compatible bottom brackets. May not be suitable for pressing in other brand's DUB compatible bottom brackets. If used with other brand BBs, make sure the adapter is pushing on either the bearing outer race, or the BB cup itself. Do not push on the bearing seal.
    In stock
  • Ritchey - Handlebar MTB SuperLogic Low UD Matte 740MM/15MM

    The SuperLogic Carbon 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-15mm of height adjustment.
    In stock
  • Ritchey - Handlebar MTN WCS Flat UD Matte 710MM/9D

    The WCS Carbon 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. Carbon Monocoque Construction. +/-5mm rise. Width: 710mm. Sweep: 9 degrees. Not bar end compatible. Matte UD Finish. 183g.
    In stock
  • Ritchey - WCS True MTB Grips Blue 130MM

    Tough neoprene foam is superlight, plush and grippy even in wet conditions. Slim anatomical shape. One of the lightest grips available. Now the world-beating superlight, super-grippy WCS TrueGrip is available in colors. 130mm, 43g without end plugs.
    In stock
  • Reviews

    Recommended accesories

    • Ritchey - Handlebar MTB WCS Rizer Blatte 760MM/30MM

      Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for race quality at an attainable price. Triple-butted 7050 alloy. 30mm rise. 9-degree sweep. 31.8mm center section. Blatte finish. 275g.
      Out of stock
    • Ritchey - Handlebar MTB WCS Flat Blatte 740MM/9D 2019

      The 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. Triple-butted 7050 alloy construction. +/-5mm rise. Sweep: 9- or 5-degree (5-degree International markets only). Blatte finish. 236g.
      Out of stock

    Description

    You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.
    The WCS C22 25D Stem offers 25° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout.

    • 25° of positive or negative rise
    • 1-1/8" steerer diameter
    • Stem body wraps 220° around bar clamping area, holding it in place for easy installation