Shopping basket

Your shopping basket is empty

Ritchey - Stem WCS Trail Blatte 110MM

(0)

Description

The first Ritchey stem specifically designed for today's 5-6" travel trail bikes using wide bars. More than just a beefed-up version of our other stems – for the WCS Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. 3D Forged 2014 alloy for superior strength and lightweight. 220 degree, extra-wide bar clamp improves stiffness and fits most riser bars. Material: 3D Forged 2014 alloy, Lengths: 45 - 110mm, Angle: Zero rise, Steerer Height: 45mm, Faceplate Width: 40mm, Steerer: 1-1/8", Ritchey B... Read more

Description

The first Ritchey stem specifically designed for today's 5-6" travel trail bikes using wide bars. More than just a beefed-up version of our other stems – for the WCS Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. 3D Forged 2014 alloy for superior strength and lightweight. 220 degree, extra-wide bar clamp improves stiffness and fits most riser bars. Material: 3D Forged 2014 alloy, Lengths: 45 - 110mm, Angle: Zero rise, Steerer Height: 45mm, Faceplate Width: 40mm, Steerer: 1-1/8", Ritchey Blatte Finish, 115g (70mm).

In stock

€ 99,90

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code31455427028
  • EAN796941317207
  • BrandRitchey
  • ModelWCS
  • TypeTRAIL
  • MaterialAlloy
  • Material typeAluminum
  • Type of bikeMountainbike
  • Net weight (g)115
  • Handlebar diameter (mm)31.8
  • Steerertube diameter1 1/8"
  • Stem length (mm)110
  • Clamp height (mm)45
  • Steerertube diameter (mm)28.6
  • Angle (°)0
  • KLeurnewBlack

Others also bought

  • Ritchey - WCS True MTB Grips Blue 130MM

    Tough neoprene foam is superlight, plush and grippy even in wet conditions. Slim anatomical shape. One of the lightest grips available. Now the world-beating superlight, super-grippy WCS TrueGrip is available in colors. 130mm, 43g without end plugs.
    In stock
  • Ritchey - Saddle WCS Trail Black

    When the going gets rough, less is more when it comes to saddles. The WCS Trail saddle was designed with a flat, minimal shape that offers just enough padding to get through the rocky sections. Yet it's sleek enough to easily allow you to get behind the bottom bracket when necessary for those technical descents. Saddle Dimensions: 278 x 132mm. Rails: CrN/Ti. Rail Dimensions: 7x7mm. Superlight foam padding. Shell: Nylon + carbon. Cover: Microfiber. Finish: Black or white. 223g.
    In stock
  • Ritchey - Stem WCS C220 Blatte 73D/90MM

    You really can have it all—the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.The WCS C220 73D Stem offers 17° of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220° over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality stainless steel black bolts are used throughout. 17° of positive or negative rise 1-1/8" steerer diameter Stem body wraps 220° around bar clamping area, holding it in place for easy installation
    In stock
  • Ritchey - Seatpost WCS Carbon Replacement Clamps 8X8.5MM

    In stock
  • Reviews

    Recommended accesories

    • Ritchey - Handlebar MTB WCS Trail Flat Blatte 760MM

      The new 2X Trail bar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29er's and other bikes with tall front ends. +/- 5mm rise. Blatte finish. Width: 760mm. Sweep: 9-degrees. 232g.
      Out of stock
    • Ritchey - Handlebar MTB WCS Trail Rizer Blatte 800MM/30MM

      Same proven Ritchey quality, performance and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. Extra wide grip area allows plenty of room for all components and remotes of choice. 30mm rise. Width: 800mm. Blatte finish. 276g.
      Out of stock
    • Ritchey - Handlebar MTB WCS Trail Rizer Blatte 800MM/20MM

      Same proven Ritchey quality, performance and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. Extra wide grip area allows plenty of room for all components and remotes of choice. 20mm rise Blatte finish 276g
      Out of stock

    Description

    The first Ritchey stem specifically designed for today's 5-6" travel trail bikes using wide bars. More than just a beefed-up version of our other stems – for the WCS Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. 3D Forged 2014 alloy for superior strength and lightweight. 220 degree, extra-wide bar clamp improves stiffness and fits most riser bars. Material: 3D Forged 2014 alloy, Lengths: 45 - 110mm, Angle: Zero rise, Steerer Height: 45mm, Faceplate Width: 40mm, Steerer: 1-1/8", Ritchey Blatte Finish, 115g (70mm).