Shopping basket

Your shopping basket is empty

Sale item
Shimano - Ultegra R8050 Di2 Front Derailleur 2X11 Braze On

Shimano - Ultegra R8050 Di2 Front Derailleur 2X11 Braze On



Quick and smooth front shifting under high pedaling torque.


Quick and smooth front shifting under high pedaling torque.

In stock
€ 279,00

€ 199,95

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren


  • Article codeIFDR8050F
  • EAN4524667728788
  • BrandShimano
  • ModelULTEGRA DI2
  • TypeR8050
  • Type of bikeRace Bike
  • Number of chain ringsDouble
  • Net weight (g)132
  • Mechanical or electronicElectronic
  • Derailleur useRoad
  • Front derailleur fixationBraze-on
  • KLeurnew
    • Black
    • Silver

Others also bought

  • Trivio - Cleats Look Keo 0° Anti-Slip Black

    These synthetic cleats click in and out of your road bike pedal quickly and smoothly. They are compatible with Look Kéo click pedals and feature anti-slip layers. So no dangerous situations both on and off the bike. The soft material and the anti-slip layers ensure that you also walk comfortably on your cycling shoes. The cleats are available in 2 options. The black version is fixed in the pedal without any freedom of movement of the shoe. The red one allows a free movement angle of 7° which can provide extra comfort for sore knees or joints.
    In stock
  • Montano - Di2 Battery Seatpost Rubber Set Ø27.2MM

    In stock
  • Ritchey - Seatpost Comp Trail Zero BB Black 400X31.6

    The newly redesigned Trail post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether your hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. 3D Forged 6061 Construction. Diameters: 27.2, 30.9, 31.6mm. Zero offset. Length: 400mm. Finish: BB Black. 240g (27.2x400).
    In stock
  • Bike7 - Pro Seal 1 Liter

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock
  • Reviews