Shopping basket

Your shopping basket is empty

Ritchey - WCS Spacer Set Carbon UD Mat 3X5MM + 3X10MM
Ritchey - WCS Spacer Set Carbon UD Mat 3X5MM + 3X10MM

Ritchey - WCS Spacer Set Carbon UD Mat 3X5MM + 3X10MM

(0)

Description

The iconic Ritchey logo is proudly emblazoned on these original 1-1/8" superlight carbon headset spacers.

  • UD Matte Carbon
  • Black on black Ritchey logo
  • 1-1/8"
  • 5mm and 10mm height

Description

The iconic Ritchey logo is proudly emblazoned on these original 1-1/8" superlight carbon headset spacers.

  • UD Matte Carbon
  • Black on black Ritchey logo
  • 1-1/8"
  • 5mm and 10mm height

In stock

€ 24,90

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code33056117008
  • EAN796941332804
  • BrandRitchey
  • ModelWCS
  • TypeCARBON
  • MaterialCarbon UD
  • Material typeCarbon
  • Headset size1 1/8 Inch
  • FinishMatt
  • KLeurnewBlack

Others also bought

  • Ritchey - Handlebar Road Solo Streem Carbon UD MAT 42CM/100MM
    A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress.
    In stock

    € 399,00

  • Ritchey - WCS True MTB Grips Black 130MM
    In stock

    € 13,90

  • Wheels Mfg - Bottom Bracket Adapter 29X42MM Open Bore
    29mm open bore adapter is used to press 29mm x 42mm (DUB Compatible) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. Will press in Wheels Mfg SRAM DUB compatible bottom bracket cups. 1/2" thru hole for use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO). Installs: 29X42 (DUB compatible) bearing Inner Step Outer Diameter: 41.8mm Outer Diameter: 28.9mm Thru Hole Diameter: 12.8mm (1/2") Thickness: 7mm Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod. Machined, red anodized aluminum Sold individually 29SRAM-OB is designed specifically to press in 6806/29 sealed bearings and will also press in Wheels Mfg SRAM DUB compatible bottom brackets. May not be suitable for pressing in other brand's DUB compatible bottom brackets. If used with other brand BBs, make sure the adapter is pushing on either the bearing outer race, or the BB cup itself. Do not push on the bearing seal.
    In stock

    € 10,99

  • Ritchey - WCS True MTB Grips Blue 130MM
    Tough neoprene foam is superlight, plush and grippy even in wet conditions. Slim anatomical shape. One of the lightest grips available. Now the world-beating superlight, super-grippy WCS TrueGrip is available in colors. 130mm, 43g without end plugs.
    In stock

    € 12,90

    • Reviews

    Recommended accesories

    • Ritchey - Handlebar MTB WCS Trail Flat UD Matte 740MM/9D
      The flat +/-5mm Trail bar is two bars in one: select 5mm of rise or drop while maintaining a 9 degree sweep. Great for 29er's and other bikes with tall front ends. +/- 5mm rise. Matte UD Carbon Finish. Width: 740mm. Sweep: 9D. 180g.
      Out of stock

      € 176,90

    • Ritchey - Stem WCS C220 Matrix UD Matte 100MM
      You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. Material: 3d forged 7075, carbon encased body, 4 x 4mm coated CrMo steel forward-facing faceplate bolts, 2 x 4mm coated CrMo steel offset steer tube clamp bolts, 5Nm torque max on all hardware, Compatible with all 31.8 bars, Press-fit clamp design installs and removes like a standard stem, Lengths: 70-130mm, Angle: 84/6 degree, Steerer Height: 42mm, Steerer: 1-1/8", Faceplate Width: 42mm, Matte UD Carbon Finish, 126g (110mm).
      In stock

      € 169,90

    • Ritchey - Handlebar Road Solo Streem Carbon UD MAT 42CM/100MM
      A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress.
      In stock

      € 399,00

    • Ritchey - Handlebar MTB SuperLogic Low UD Matte 740MM/15MM
      The SuperLogic Carbon 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-15mm of height adjustment.
      In stock

      € 213,90