You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. Material: 3d forged 7075, carbon encased body, 4 x 4mm coated CrMo steel forward-facing faceplate bolts, 2 x 4mm coated CrMo steel offset steer tube clamp bolts, 5Nm torque max on all hardware, Compatible with all 31.8 bars, Press-fit clamp design installs and removes like a standard stem, Lengths: 70-130mm, Angle: 84/6 degree, Steerer Height: 42mm, Steerer: 1-1/8", Faceplate Width: 42mm, Matte UD Carbon Finish, 126g (110mm).
Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment. Precision forged alloy clamp assembly for strength. Low-profile head for optimal saddle clearance and sleek lines. Wide saddle clamp reduces stress on lightweight saddle rails. Interchangeable clamps provide compatibility for all popular rail sizes. 3D Forged TR741 Alloy. Available in 27.2 and 31.6mm diameters. Available in 350 and 400mm lengths. 20mm Offset. 7x7mm saddle rail clamp included. Saddle Clamp Torque Spec: 12Nm. Finish: Blatte. 195g (27.2/350).
The flat +/-5mm Trail bar is two bars in one: select 5mm of rise or drop while maintaining a 9 degree sweep. Great for 29er's and other bikes with tall front ends. +/- 5mm rise. Matte UD Carbon Finish. Width: 740mm. Sweep: 9D. 180g.
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. Material: 3d forged 7075, carbon encased body, 4 x 4mm coated CrMo steel forward-facing faceplate bolts, 2 x 4mm coated CrMo steel offset steer tube clamp bolts, 5Nm torque max on all hardware, Compatible with all 31.8 bars, Press-fit clamp design installs and removes like a standard stem, Lengths: 70-130mm, Angle: 84/6 degree, Steerer Height: 42mm, Steerer: 1-1/8", Faceplate Width: 42mm, Matte UD Carbon Finish, 126g (110mm).
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress.
The SuperLogic Carbon 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-15mm of height adjustment.
In stock
This product is not available at the moment.
Do you want to be informed about its availability? Please fill in your emailadress.