Shopping basket

Your shopping basket is empty

Fore - Tubeless Valve 40MM Black

(0)

Description

The FORE clincher wheels CR and CRD are Tubeless Ready (TLR). Tubeless rim tape and valves are included with the wheels. However, these beautiful black valves are also available separately in different lengths.

Description

The FORE clincher wheels CR and CRD are Tubeless Ready (TLR). Tubeless rim tape and valves are included with the wheels. However, these beautiful black valves are also available separately in different lengths.

In stock

€ 9,99

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article codeFOR-TI-006
  • EAN8718223016020
  • BrandFore
  • ModelTUBELESS
  • Type of bike
    • Race Bike
    • Gravel Bike
  • Valve length (mm)40
  • Tire typeInnertube
  • TubelessYes
  • KLeurnewBlack

Others also bought

  • Fore - Tubeless Valve 50MM Black

    The FORE clincher wheels CR and CRD are Tubeless Ready (TLR). Tubeless rim tape and valves are included with the wheels. However, these beautiful black valves are also available separately in different lengths.
    In stock
  • Bike7 - Pro Seal 125ML

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock
  • Sale item

    Controltech - Lynx MTB Handlebar 35 Riser 20MM 750MM

    Triple-butted 6061 aluminum reduces weight with carefully-varied tube wall thicknesses, while new 35mm clamp diameter offers ultimate hard-riding strength. 35mm central bulge pairs with suitable stems to create the stiffest, strongest front end available. Triple-butting reduces mass by thinning the tube walls where extra material would just be dead weight and retaining strength where it’s needed. Impressively light – just 310g for the 750mm option. Available in trail-friendly 750mm or the full 800mm for larger aggressive riders. Fits the new generation of very short stems. 9º backsweep allows angle adjustment by rolling the bar in the clamp. 4º upsweep creates a natural, comfortable and secure wrist position whether you’re riding seated or standing.
    In stock
  • Fore - Tubeless Valve 60MM Black

    The FORE clincher wheels CR and CRD are Tubeless Ready (TLR). Tubeless rim tape and valves are included with the wheels. However, these beautiful black valves are also available separately in different lengths.
    In stock
  • Reviews