Shopping basket

Your shopping basket is empty

Filter

  • show 9 more

Sealant

28 items

  • Bike7 BIKE7 PRO SEAL 125ML

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock
  • Bike7 BIKE7 PRO SEAL 1L

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock
  • Bike7 BIKE7 PRO SEAL 5L

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock
  • Bike7 BIKE7 PRO SEAL 5L + TAP

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tyres, be it mountain bike or racing tyres. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides an effective immediate repair. Tubeless and tubeless ready Seals holes up to 8 mm Compatible with CO2 cartridges Contains natural latex: non-corrosive, non-toxic and safe
    Out of stock
  • Bike7 BIKE7 TAP FOR PRO SEAL 5L

    In stock
  • Challenge Challenge - Smart Tubeless Sealant - 250ML

    Challenge's high-performance tubeless systems deserve high-quality tubeless sealants. The SMART Sealant is designed to work with both vulcanized and handcrafted TLR and tubeless tires. This non-allergenic, ammonia-free formula can seal cuts up to 6mm, remains Liquid in the tire for up to 6 months, will not solidify with Co2 use and will not damage rims or tires with prolonged use Installation is easy using the application tip and no need to shake the bottle Available in a bottle of 250 ml/8.5oz. Close cuts up to 6mm Does not damage rims or tires No need to shake Remains liquid in the tire for ~ 6 months Keep adding via valve if necessary Does not solidify with CO2 use Non-allergenic
    In stock
  • Schwalbe DOC BLUE PROFESSIONAL 200ML

    Best suited for Tubeless conversion. Produced by Stan's No Tubes! Also suitable for repairs or as preventive puncture protection for inner tubes, tubes and normal tubeless systems.
    In stock
  • Schwalbe DOC BLUE PROFESSIONAL 500ML

    New Doc Blue: Now even better formulated for Tubeless conversions. Produced by Stan’s NoTubes! It can also be used as a puncture potection preventative for bicycle tubes, tubular tires and standard Tubeless systems.
    Out of stock
  • Schwalbe DOC BLUE PROFESSIONAL 60ML

    Best suited for Tubeless conversion. Produced by Stan's No Tubes! Also suitable for repairs or as preventive puncture protection for inner tubes, tubes and normal tubeless systems.
    In stock
  • Joe's no flats ECO SEALANT 1000ML

    The new generation in puncture protection! Latex free, ammonium free and protein free. The best sealant in the market! Specifically developed for light TLR/ TNT tubeless tires with thin side walls. Suitable for sensitive rims and tires. Suitable for people with allergy and sensitivity to latex. For use in tubeless tires and inner-tubes. Instantly seals punctures in the tread up to 6 mm more permanently than any other sealant on the market. Does not build a sticky substance in the tire. Easy to use spout- fits into all valves. Contains micro-sealing particles. Recommended Amount for 1 mountain bike wheel tubeless or inner-tube: 60-120 ml for XC and CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-12 months depending on quantity and weather conditions. 125 ml bottle is good for 1-2 mountain bike wheels. 240 ml bottle is good for 1-4 mountain bike wheels.
    In stock
  • Joe's no flats ECO SEALANT 125ML

    The new generation in puncture protection! Latex free, ammonium free and protein free. The best sealant in the market! Specifically developed for light TLR/ TNT tubeless tires with thin side walls. Suitable for sensitive rims and tires. Suitable for people with allergy and sensitivity to latex. For use in tubeless tires and inner-tubes. Instantly seals punctures in the tread up to 6 mm more permanently than any other sealant on the market. Does not build a sticky substance in the tire. Easy to use spout- fits into all valves. Contains micro-sealing particles. Recommended Amount for 1 mountain bike wheel tubeless or inner-tube: 60-120 ml for XC and CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-12 months depending on quantity and weather conditions. 125 ml bottle is good for 1-2 mountain bike wheels. 240 ml bottle is good for 1-4 mountain bike wheels.
    In stock
  • Joe's no flats ECO SEALANT 500ML

    The new generation in puncture protection! Latex free, ammonium free and protein free. The best sealant in the market! Specifically developed for light TLR/ TNT tubeless tires with thin side walls. Suitable for sensitive rims and tires. Suitable for people with allergy and sensitivity to latex. For use in tubeless tires and inner-tubes. Instantly seals punctures in the tread up to 6 mm more permanently than any other sealant on the market. Does not build a sticky substance in the tire. Easy to use spout- fits into all valves. Contains micro-sealing particles. Recommended Amount for 1 mountain bike wheel tubeless or inner-tube: 60-120 ml for XC and CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-12 months depending on quantity and weather conditions. 125 ml bottle is good for 1-2 mountain bike wheels. 240 ml bottle is good for 1-4 mountain bike wheels.
    In stock
  • Joe's no flats ECO SEALANT 60ML

    The new generation in puncture protection! Latex free, ammonium free and protein free. The best sealant in the market! Specifically developed for light TLR/ TNT tubeless tires with thin side walls. Suitable for sensitive rims and tires. Suitable for people with allergy and sensitivity to latex. For use in tubeless tires and inner-tubes. Instantly seals punctures in the tread up to 6 mm more permanently than any other sealant on the market. Does not build a sticky substance in the tire. Easy to use spout- fits into all valves. Contains micro-sealing particles. Recommended Amount for 1 mountain bike wheel tubeless or inner-tube: 60-120 ml for XC and CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-12 months depending on quantity and weather conditions. 125 ml bottle is good for 1-2 mountain bike wheels. 240 ml bottle is good for 1-4 mountain bike wheels.
    In stock
  • Joe's no flats ELITE RACERS SEALANT MTB 125ML

    Scientifically developed to meet the high demands of professional Mountain Bike racers. Instantly seals punctures in the tread up to 6 mm. Seals small slits faster and more permanently than any other sealant on the market. For use in tubeless tires, tubular and inner-tubes. Recommended Amount for 1 mountain bike wheel, tubeless, tubular or inner-tube: 60-120 ml for XCand CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-8 months. This bottle is good for 3-8 mountain bike wheels.
    In stock
  • Joe's no flats ELITE RACERS SEALANT MTB 500ML

    Scientifically developed to meet the high demands of professional Mountain Bike racers. Instantly seals punctures in the tread up to 6 mm. Seals small slits faster and more permanently than any other sealant on the market. For use in tubeless tires, tubular and inner-tubes. Recommended Amount for 1 mountain bike wheel, tubeless, tubular or inner-tube: 60-120 ml for XCand CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-8 months. This bottle is good for 3-8 mountain bike wheels.
    In stock
  • Joe's no flats PODIUM SEALANT 125ML

    Sometimes, the only thing that matters is one run, one epic day or one Enduro stage. The Podium Sealant was designed exactly for this purpose. To bring the racer to the finish line under the roughest conditions. As a race day tubeless sealant for MTB, The Podium Sealant it is faster than any other sealant in the market and will seal holes and cuts up to 10mm. Race day sealant for professional MTB riders for ultra-high performance. - Instantly seals punctures - up to 10mm.- Seals holes and cuts.- Designed specifically for Tubeless Ready tires in tough conditions.- CO₂ Compatible.Prevents air leaks from thin tire side walls.- Ultra high performance - Up to 300km. High performance 300-1000km. Standard performance (Joe's No Flats' Eco/Super Sealant equivalent) - over 1000km.- Wide temperatures range (-5ºC - +50ºC) compatibility.- Wide pressures range (15PSI - 100PSI) compatibility.- Recommended amount for 1 mountain bike wheel: 120 ml.
    In stock
  • Joe's no flats PROFESSIONAL PUMP FOR 20L JERRYCAN

    With this distribution pump for the 20L jerry can from Joe's No Flats, you can quickly and professionally fill inner tubes with Joe's No Flats Yellow Gel.
    In stock
  • Continental REVOLUTION SEALANT 1000ML

    The ammonium and protein free RevoSealing reliably seals punctures and small tears, without chemically affecting the tyre or the tube. Not only for repairs, the RevoSealant can be universally applied to effectively prevent punctures in tubes and tubeless tyres. In addition, the RevoSealant can also be used as a sealer for tubeless ready systems, which are popular in mountain biking, with suitable corresponding tyres.
    In stock
  • Continental REVOLUTION SEALANT 240ML

    The ammonium and protein free RevoSealing reliably seals punctures and small tears, without chemically affecting the tyre or the tube. Not only for repairs, the RevoSealant can be universally applied to effectively prevent punctures in tubes and tubeless tyres. In addition, the RevoSealant can also be used as a sealer for tubeless ready systems, which are popular in mountain biking, with suitable corresponding tyres.
    In stock
  • Joe's no flats ROAD LEADER SEALANT 60ML

    Specifically engineered to seal punctures at high air pressures of road wheels. Designed to protect high pressure tires up to 130 psi. For tubeless ready tires, tubular tires and tubes. Instantly seals up to 3 mm punctures in the tread. CO2 compatible. Contains micro-sealing particles. 60ml bottle.
    In stock
  • Joe's no flats SEALANT FLES (EMPTY) 125ML

    In stock
  • Joe's no flats SUPER SEALANT 1000ML

    Ultra-fast sealing for tubeless, tubular and inner tubes. Excellent sealing for holes up to 6mm. Compatible with a wide range of temperatures (-20ºC - +70ºC). Compatible with a wide range of pressures (15PSI - 120PSI). Suitable for both Tubeless and Inner Tube. Latex based. For effective puncture resistance, add fresh sealant every 3-12 months depending on quantity and weather conditions.
    In stock
  • Joe's no flats SUPER SEALANT 125ML

    The world's leading anti-puncture sealant. Scientifically developed to prevent punctures in bicycle wheels. For use in tubeless tires and inner-tubes. Instantly seals punctures in the tread up to 3 mm. Easy to use spout- fits into all valves (125ml). Contains micro-sealing particles. Recommended Amount for 1 mountain bike wheel tubeless or inner-tube: 60-120 ml for XC and CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-12 months depending on quantity and weather conditions. 125 ml bottle is good for 1-2 mountain bike wheels. 500 ml bottle is good for 3-8 mountain bike wheels.
    In stock
  • Joe's no flats SUPER SEALANT 500ML

    The world's leading anti-puncture sealant. Scientifically developed to prevent punctures in bicycle wheels. For use in tubeless tires and inner-tubes. Instantly seals punctures in the tread up to 3 mm. Easy to use spout- fits into all valves (125ml). Contains micro-sealing particles. Recommended Amount for 1 mountain bike wheel tubeless or inner-tube: 60-120 ml for XC and CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-12 months depending on quantity and weather conditions. 125 ml bottle is good for 1-2 mountain bike wheels. 500 ml bottle is good for 3-8 mountain bike wheels.
    In stock