Shopping basket

Your shopping basket is empty

Filter

  • show 4 more

  • show 16 more

Tools

139 items

  • Trivio ALLEN KEY SET 9 PIECES 1.5-2-2.5-3-4-5-6-8-10MM

    Allen keys are indispensable if you want to repair your bike. This nine-piece set offers you all frequently used allen sizes at hand. The set includes 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 and 10mm allen keys. They are held together by the included holder and sorted by size. The long end of the key is provided with a rounded head so you can tinker at an angle.
    In stock
  • Sale item

    Wheels Manufacturing BEARING EXTRACTOR ID 10MM 6000 ,6200 ,6800, 6900

    Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings. 6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm. 6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm. 6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm. 6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    In stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 12MM 6001, 6801, 6901

    Individual extractor for removing 6001, 6801 & 6901 sealed bearings. 6001: Bearing ID: 12mm / OD: 28mm / Width: 8mm. 6801: Bearing ID: 12mm / OD: 21mm / Width: 5mm. 6901: Bearing ID: 12mm / OD: 24mm / Width: 6mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    In stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 15MM 6002, 6702, 6802, 6902

    Individual extractor for removing 6002, 6702, 6802, 6902, 15268 & 15267 sealed bearings. 6002: Bearing ID: 15mm / OD: 32mm / Width: 9mm. 6702: Bearing ID: 15mm / OD: 24mm / Width: 5mm. 6802: Bearing ID: 15mm / OD: 24mm / Width: 5mm. 6902: Bearing ID: 15mm / OD: 28mm / Width: 7mm. 15268: Bearing ID: 15mm / OD: 26mm / Width: 7mm. 15267: Bearing ID: 15mm / OD: 26mm / Width: 8mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    In stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 17MM 6003, 6803, 6903, 17287

    Individual extractor for removing 6003, 6803, 6903 & 17287 sealed bearings. 6003: Bearing ID: 17mm / OD: 35mm / Width: 10mm. 6803: Bearing ID: 17mm / OD: 26mm / Width: 5mm. 6903: Bearing ID: 17mm / OD: 30mm / Width: 7mm. 17287: Bearing ID: 17mm / OD: 28mm / Width: 7mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    In stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 20MM 6704, 6804, 6904

    Individual extractor for removing 6804 & 6904 sealed bearings. 6704 Bearing ID: 20mm / OD: 27mm / Width: 4mm. 6804 Bearing ID: 20mm / OD: 32mm / Width: 7mm. 6904 Bearing ID: 20mm / OD: 37mm / Width: 9mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    Out of stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 24MM 24X37

    Individual extractor for removing 2437 sealed bearing. Bearing ID: 24mm / OD: 37mm / Width: 7mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    In stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 25MM 6805

    Individual extractor for removing 6805 sealed bearing. Bearing ID: 25mm / OD: 37mm / Width: 7mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    Out of stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 30MM 6806

    Individual extractor for removing 6806 sealed bearing. Bearing ID: 30mm / OD: 42mm / Width: 7mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    In stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 8MM 608, 688

    Individual extractor for removing 608 & 688 sealed bearings. 608: Bearing ID: 8mm / OD: 22mm / Width: 7mm. 688: Bearing ID: 8mm / OD: 16mm / Width: 5mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    Out of stock
  • Wheels Manufacturing BEARING EXTRACTOR ID 9MM 609, 9227

    Individual extractor for removing. 609 sealed bearing: Bearing ID: 9mm / OD: 24mm / Width: 7mm. 9227 sealed bearing: Bearing ID: 9mm / OD: 22mm / Width: 7mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.
    In stock
  • Wheels Manufacturing BEARING EXTRACTOR KIT

    These extractors remove sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch. 11-piece set (Individual replacement extractors and parts are also available). Removes these sealed bearing sizes: 608, 609, 688, 6000, 6001, 6002, 6003, 6200, 6800, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, R6, 24x37.
    Out of stock
  • Wheels Manufacturing BEARINGS INPRESS ADAPTER KIT >10MM ID

    This 23-piece drift set is used to install 10mm and larger inside diameter sealed bearings. Compatible with the Wheels Mfg. PRESS-1 or PRESS-4 handles. This set includes the following drifts and spacers: 6802 Open Bore (x2), 6802 Over Axle, 6901 Open Bore (x2), 6901 Over Axle, 40mm, 6902 Open Bore (x2), 6902 Over Axle, 7mm, 6903 Open Bore (x2), 6903 Over Axle, 6000 Open Bore (x2), 6000 Over Axle, 6mm, 6001 Open Bore (x2), 6001 Over Axle, 7mm, 15-25mm Speed Spacer, 17-25mm Speed Spacer, 20-25mm Speed Spacer, 30mm Speed Spacer (x2).
    In stock
  • Wheels Manufacturing BEARINGS INPRESS ECONOMY (WITHOUT ADAPTERS)

    An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Press-4 Economy Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. The Press-4 package includes 2 handles and a threaded rod. Press-4 is used with separately-purchased bearing adapters specific to the sealed bearings being installed (see links below). You may need to mix and match adapters for your specific use. Check bearing part numbers before ordering. Installs bearing sizes: 2437, 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904. Use Press-4 to install your pressfit 30 bottom brackets along with our new PF30-OB drifts. Installation drifts for use with Press-4: Individual Over Axle Adapters, Individual Open Bore Adapters.
    In stock
  • Wheels Manufacturing BEARINGS INPRESS HANDLE FOR PRESS-1

    Replacement Handle Assembly for our Large Sealed Bearing Press (PRESS-1). (1) Machined fixed end aluminum "T" Handle with brass insert. (1) Machined non-fixed end aluminum "T" Handle with brass insert. (1) 3/8" x 12" Threaded Rod. (1) M5x12 flat head screw to secure fixed-end handle to rod.
    Out of stock
  • Wheels Manufacturing BEARINGS INPRESS KIT ADAPTER UNIVERSAL

    Designed to press in all current Wheels MFG bottom brackets! Our universal bottom bracket drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed. Inner hole sized to fit 1/2" threaded rod. Machined aluminum. Compatible with PRESS-7, PRESS-1or PRESS-4 handles. Drifts fit the following BB shell sizes: BB30, PF30, BB86, BB92, BBRight, BB386EVO, Cannondale BB30A, PF30A, Specialized Carbon and Alloy OSBB, TREK BB90, BB95, PF24. Drifts fit the following sealed bearing inner diameters: 22mm, 24mm, 30mm.
    In stock
  • Wheels Manufacturing BEARINGS INPRESS KIT EXTENSION FOR 10/12/15/17/20M

    A must-have tool for the busy bike shop, the PRESS-3 Over Axle Bearing Adapter works in conjunction with the PRESS-1 and PRESS-4 Sealed Bearing Presses. Together they allow for easy installation of 10mm I.D. and larger bearings into hubs with shouldered axles, always pressing simultaneously on both the inner and outer race of the bearing and preventing damage during the installation process. Adapters are designed to install the final bearing in hubs with shouldered axles. Includes adapters for 12 different size bearings ranging from 10mm to 20mm. Installs sealed bearing sizes: 6900-6000 10mm axles, 6901-6001 12mm axles, 6802-6902-6002 15mm axles, 6803-6903-6003 17mm axles, 6804-6904 20mm axles. All parts are laser etched for easy identification.
    In stock
  • Wheels Manufacturing BEARINGS INPRESS KIT SMALL SEALED BEARINGS

    Another indispensable tool for the professional bike shop, the Press-2 works with bearings that have an I.D. of 10mm or smaller (most front hub sealed bearing fall in this range). This small bearing press features an aluminum base with 9 open bore and over axle adapters, and a quick release skewer. Installs sealed bearing sizes 6801, 6802, 6803, 6900, 6901, R6, 688, 608, 609. All parts are laser etched for easy identification.
    In stock
  • Wheels Manufacturing BEARINGS INPRESS SPACER 30MM FOR PRESS-1

    Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. Compatible with: PRESS-4 - Economy Press, PRESS-1 - Large Sealed Bearing Press, PRESS-1 Handle & Rod Assembly, Length: 30mm, OD: 22mm, ID: 10mm, Machined Aluminum, Anodized Red, Sold individually.
    In stock
  • Joe's no flats BIKE BRUSH KIT

    Useful set of brushes for cleaning your bike. A set of 3 different brushes for cleaning all bike parts. Great for your home workshop.
    In stock
  • Campagnolo BLEEDING KIT

    Out of stock
  • Wheels Manufacturing BOTTOM BRACKET EXTRACTOR KIT

    Bearing extractors set for pushing out 22mm, 24mm and 30mm ID sealed bearings from bottom bracket cups. Compatible with our 1/2" threaded press rod and handles (PRESS-7 and PRESS-7-PRO). BB-EXT Includes. (1) 30mm ID sealed bearing extractor, (1) 24mm ID sealed bearing extractor, (1) 22mm ID sealed bearing extractor, (1) 52mm receiver cup, (1) 44mm receiver cup sleeve, (1) 42mm receiver cup sleeve, (1) 39mm receiver cup sleeve, (1) bearing pusher shaft. Bearing Extractors are compatible with 30mm, 24mm and 22mm ID sealed bearings. Extractors have 1/2" thru hole for use with our 1/2" threaded rod press handles. For use with handles and rod from: Universal Bottom Bracket Press (PRESS-7), Professional Bottom Bracket Press (PRESS-7-PRO).
    Out of stock
  • Wheels Manufacturing BOTTOM BRACKET KEY 2-SIDED 48.5/44MM

    Double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Compatible with all Wheels Manufacturing bottom brackets. Socket is machined for 1/2" drive, but a 3/8" to 1/2" adapter is included so you can use it with 3/8" drive torque wrenches. 48.5mm, 16-notch pattern matches up with Wheels Mfg bottom brackets, along with some FSA MegaEVO bottom brackets. The 44mm, 16-notch side matches up with Wheels Manufacturing bottom brackets, along with many other outboard bearing bottom brackets including Shimano, FSA MegaEXO, Campagnolo Ultra Torque and SRAM/Truvativ. Machined 6061 Aluminum. Anodized Red. Compatible with all Wheels Manufacturing bottom brackets that have the following spline patterns: 48.5mm, 16-notch, 44mm, 16-notch. Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque and FSA. If using with a non-Wheels Manufacturing bottom bracket, check the technical specifications with that bottom bracket manufacturer for exact size and pattern.
    In stock
  • Wheels Manufacturing BOTTOM BRACKET PRESS ADAPTER 29X42MM OPEN BORE

    29mm open bore adapter is used to press 29mm x 42mm (DUB Compatible) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. Will press in Wheels Mfg SRAM DUB compatible bottom bracket cups. 1/2" thru hole for use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO). Installs: 29X42 (DUB compatible) bearing Inner Step Outer Diameter: 41.8mm Outer Diameter: 28.9mm Thru Hole Diameter: 12.8mm (1/2") Thickness: 7mm Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod. Machined, red anodized aluminum Sold individually 29SRAM-OB is designed specifically to press in 6806/29 sealed bearings and will also press in Wheels Mfg SRAM DUB compatible bottom brackets. May not be suitable for pressing in other brand's DUB compatible bottom brackets. If used with other brand BBs, make sure the adapter is pushing on either the bearing outer race, or the BB cup itself. Do not push on the bearing seal.
    In stock