The new tubeless valves are available in stem lengths of 40 mm, 60 mm and 100 mm and their design makes fitting them a breeze. There is a suitable valve solution for every depth of rim. The valve base can be firmly installed in the rim using the hex key (4 mm) without over-tightening. The shortened cone ensures a low installation height and therefore more space for the tire beads. Thanks to the large valve inner diameter (4 mm), the tire can be inflated particularly effectively with air and sealing fluid.
The new tubeless valves are available in stem lengths of 40 mm, 60 mm and 100 mm and their design makes fitting them a breeze. There is a suitable valve solution for every depth of rim. The valve base can be firmly installed in the rim using the hex key (4 mm) without over-tightening. The shortened cone ensures a low installation height and therefore more space for the tire beads. Thanks to the large valve inner diameter (4 mm), the tire can be inflated particularly effectively with air and sealing fluid.
Tubeless is gaining more and more popularity. The benefits of riding without an inner tube are now known. Less rolling resistance, fewer punctures and the ability to drive with lower tire pressure lead to better performance. The tubeless valve from Trivio ensures easy assembly. The black valve also looks sleek in every tubeless wheel set.
The FORE clincher wheels CR and CRD are Tubeless Ready (TLR). Tubeless rim tape and valves are included with the wheels. However, these beautiful black valves are also available separately in different lengths.
The Ritchey Tubeless Valve is a critical component for tubeless bicycle wheel systems by creating an airtight seal around the valve hole on the rim. Sold as a single valve (silver) - double (black) For use with tubeless and tubeless-ready rims and tires only
The Ritchey Tubeless Valve is a critical component for tubeless bicycle wheel systems by creating an airtight seal around the valve hole on the rim. Sold as a single valve (silver) - double (black) For use with tubeless and tubeless-ready rims and tires only
The new tubeless valves are available in stem lengths of 40 mm, 60 mm and 100 mm and their design makes fitting them a breeze. There is a suitable valve solution for every depth of rim. The valve base can be firmly installed in the rim using the hex key (4 mm) without over-tightening. The shortened cone ensures a low installation height and therefore more space for the tire beads. Thanks to the large valve inner diameter (4 mm), the tire can be inflated particularly effectively with air and sealing fluid.
Extenders are the perfect solution when standard valves are not long enough for higher carbon rims. Unscrew the valve cup of the Presta valve and screw the extender onto the valve using the mounting tool. Calculate in advance which length is needed on the basis of the valve length of the inner tube and the rim height of your wheel. These extenders are 80 mm long.
