Winkelmand

Jouw winkelmand is leeg

Filter

  • Toon 13 meer

Trapas Adapters

58 Producten

  • Wheels Manufacturing TRAPAS ADAPTER BB30 -> SHIMANO 24MM

    The BB30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin.
    Niet op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30 -> SRAM 22/24MM

    The BB30-SRAM adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin.
    Op voorraad
  • Shimano TRAPAS ADAPTER PRESS FIT BB71 RACE 41MM 89.5/92MM

    Op voorraad
  • Shimano TRAPAS ADAPTER PRESS FIT BB71 MTB 41MM 89.5/92MM

    Niet op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER PRESSFIT 30 -> SHIMANO 24MM

    The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 adapter shims and a 14-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER PRESSFIT 30 -> SRAM 22/24MM

    The BBUNIV-SRAM kit adapts SRAM/Truvativ cranks to virtually any BB/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. For use only with bottom bracket shell widths from 68mm to 83mm. Includes 2 adapter shims and a 15-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30 -> CAMPAGNOLO 25MM

    BB30-CAMP adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. Note: The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle. Machined engineering-grade Delrin. 48g/pr.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BBRIGHT/BB30A/PF30A -> SHIMANO 24MM

    Adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight™, BB30A and Press fit 30A frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. Includes eight 0.7mm shims for fine-tuning chain line. Machined engineering-grade Delrin. 48g/pr.
    Niet op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30/PF30 -> SRAM/TRUVATIV 22/24MM

    Niet op voorraad
  • Wheels Manufacturing TRAPAS PF30 -> SRAM 22/24MM - ABEC-3 - ZWART

    Install 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle cranksets (SRAM, Truvativ, Etc.). No adapters needed. Packaged for retail display.
    Niet op voorraad
  • Wheels Manufacturing TRAPAS PF30 -> SHIMANO 24MM - ABEC-3 - ZWART

    Install 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle cranksets (Shimano, FSA, Etc.). No adapters needed. Packaged for retail display.
    Niet op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BBRIGHT -> SRAM

    For adapting 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight™ frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. Includes eight 0.7mm shims for fine-tuning chain line. Machined engineering-grade Delrin. 48g/pr.
    Op voorraad
  • Aanbiedingsproduct

    Wheels Manufacturing TRAPAS ADAPTER 386EVO -> SHIMANO

    For adapting Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 - 24mm ID adapters. Includes 8 - .7mm spacers. Machined engineering-grade Delrin. 48g/pr.
    Niet op voorraad
  • Wheels Manufacturing TRAPAS BSA -> 30MM CRANKS - CERAMIC - ZWART

    BSA threaded Ceramic Hybrid BB for use with 30mm diameter cranks with a spindle length of at least 115mm. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro Ceramic Hybrid bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current BB30 Wide 30mm spindle (BB30a, 386EVO, Rotor 3D+, SRAM ) cranksets. Packaged for retail display
    Op voorraad
  • Wheels Manufacturing TRAPAS BSA -> 30MM CRANKS - ABEC-3 - ZWART

    BSA threaded ABEC-3 BB for use with 30mm diameter cranks with a spindle length of at least 115mm. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro ABEC-3 bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current BB30 Wide 30mm spindle (BB30a, 386EVO, Rotor 3D+, SRAM ) cranksets. Packaged for retail display.
    Niet op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30/PF30 -> SHIMANO

    The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 adapter shims and a 14-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS BSA -> 30MM CRANKS - ACB - ZWART

    BSA threaded Angular Contact BB for use with 30mm diameter cranks with a spindle length of at least 115mm. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current BB30 Wide 30mm spindle (BB30a, 386EVO, Rotor 3D+, SRAM ) cranksets. Packaged for retail display.
    Niet op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SHIMANO 24MM - ACB - ZWART

    Wheels Manufacturing’s BB30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into BB30 frames without the need for any adapters. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm (Shimano, FSA, Etc.) cranksets. Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER PRESSFIT 30 -> SHIMANO/FSA

    The PF30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin. 48g/pr. NOTES: PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use our BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER 386EVO -> SRAM

    For adapting SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 1 - 24mm ID adapter (for right-side). Includes 1 - 22mm ID adapter (for left-side). Includes 8 - .7mm spacers. Machined engineering-grade Delrin. 48g/pr.
    Op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SRAM 22/24MM - ABEC-3 - ZWART

    Install 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle cranksets (SRAM, Truvativ, Etc.). No adapters needed. Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS PF30 -> SHIMANO 24MM - ACB - ZWART

    Install 24mm (Shimano, FSA, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle cranksets (Shimano, FSA, etc.). No adapters needed. Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SRAM 22/24MM - ABEC-3/5 ACB - ZWART

    Install 24/22mm (SRAM, Truvativ, Etc.) cranks into BB30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 5 Angular Contact sealed bearing in drive side cup. Enduro ABEC 3 sealed bearing in non-drive side cup. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm (SRAM, Truvativ, Etc.) cranks. No adapters needed. Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS BBRIGHT -> SHIMANO 24MM - ZERO CERAMIC - ZW

    BBRight™ Outboard ZERØ Ceramic Hybrid BB for use with 24mm spindle (Shimano) cranks. Fully serviceable. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Weight: 98g. Black anodized, machined aluminum cups. Enduro ZERØ Ceramic Hybrid bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle (Shimano) cranksets. Packaged for retail display.
    Niet op voorraad