Winkelmand

Jouw winkelmand is leeg

Filter

  • Toon 13 meer

Trapas Adapters

54 Producten

  • Wheels Manufacturing LAGER PRESSFIT BB86 -> 30MM - ABEC-3

    Enduro BB86 to 30MM ABEC-3 Sealed Bearings. Replace your BB86/92 bottom bracket with these flanged bearings and run BB386EVO cranks in your frame. For best results, use our 30mm cranks spacers to take up any play in your crankset. Each bearing presses directly in to your frame with our Large Sealed Bearing Press or Economy Bearing Press along with the 6806OB drift. Dimensions: OD: 41mm / ID: 30mm. 440-C stainless steel races and balls. Dual row radial bearings with Kluber grease. Step type axial face seal both sides. Imported. Sold individually (You'll need to purchase two per frame).
    Op voorraad
  • Wheels Manufacturing LAGER PRESSFIT BB86 -> 30MM - CERAMIC

    Enduro BB86 to 30MM Ceramic Hybrid Sealed Bearings. Replace your BB86/92 bottom bracket with these flanged bearings and run BB386EVO cranks in your frame. For best results, use our 30mm cranks spacers to take up any play in your crankset. Each bearing presses directly in to your frame with our Large Sealed Bearing Press or Economy Bearing Press along with the 6806OB drift. Dimensions: OD: 41mm / ID: 30mm. 440-C stainless steel races with cryo treatment. Grade 5 Si3N4 ceramic balls. Dual row radial bearings with Kluber grease. Step type axial face seal both sides. Imported. Sold individually (You'll need to purchase two per frame).
    Op voorraad
  • Wheels Manufacturing SERVICE KIT UNIVERSEEL BB30/PF30 SHIMANO/SRAM

    Adapt Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. 65 piece kit. 4 each Shimano and SRAM adapter sets. Extra spacers for chainline adjustment. Puller for removing adapters. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS 386EVO -> SHIMANO 24MM - ACB - ZWART

    Threaded BB for 386EVO frames and 24mm diameter spindle cranks. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: BB386EVO, BB392EVO, Bottom Bracket Shell Width (mm): 86.5mm, Bottom Bracket Shell I.D.: 46mm, Crank Spindle Diameter: 24mm, Weight: 133g, Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS 386EVO -> SRAM 22/24MM - ACB - ZWART

    Threaded BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. Notes: Wheels Mfg 386EVO BB for use with 24/22mm spindle cranks will not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2). If your Quarq spider has an ID less than 49.5mm, your crank may rub on the BB cup. Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle MTB. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: BB386EVO, BB392EVO, Bottom Bracket Shell Width (mm): 86mm - 92mm, Bottom Bracket Shell I.D.: 46mm, Crank Spindle Diameter: 22/24mm, Weight: 145g, Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER 386EVO -> SHIMANO

    For adapting Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 - 24mm ID adapters. Includes 8 - .7mm spacers. Machined engineering-grade Delrin. 48g/pr.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER 386EVO -> SRAM

    For adapting SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 1 - 24mm ID adapter (for right-side). Includes 1 - 22mm ID adapter (for left-side). Includes 8 - .7mm spacers. Machined engineering-grade Delrin. 48g/pr.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30 -> CAMPAGNOLO 25MM

    BB30-CAMP adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. Note: The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle. Machined engineering-grade Delrin. 48g/pr.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30 -> SHIMANO 24MM

    The BB30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30 -> SRAM 22/24MM

    The BB30-SRAM adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30/PF30 -> SHIMANO

    The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 adapter shims and a 14-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BB30/PF30 -> SRAM/TRUVATIV 22/24MM

    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BBRIGHT -> SRAM

    For adapting 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight™ frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. Includes eight 0.7mm shims for fine-tuning chain line. Machined engineering-grade Delrin. 48g/pr.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER BBRIGHT/BB30A/PF30A -> SHIMANO 24MM

    Adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight™, BB30A and Press fit 30A frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. Includes eight 0.7mm shims for fine-tuning chain line. Machined engineering-grade Delrin. 48g/pr.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER PRESSFIT 30 -> CAMPAGNOLO 25MM

    PF30-CAMP adapts Campagnolo Ultra-Torque cranks to PressFit 30-standard frames. This adapter fits over the installed crank bearings so no bearing removal is required for installation. Simply tap the cranks with mounted adapters into the 6806 bearing in the PressFit 30 BB. Tighten cranks to Campagnolo specifications. Machined engineering-grade Delrin. 48g/pr. NOTE: PF30-CAMP was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30Bottom Brackets.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER PRESSFIT 30 -> SHIMANO 24MM

    The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 adapter shims and a 14-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER PRESSFIT 30 -> SHIMANO/FSA

    The PF30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. Machined engineering-grade Delrin. 48g/pr. NOTES: PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use our BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter.
    Op voorraad
  • Wheels Manufacturing TRAPAS ADAPTER PRESSFIT 30 -> SRAM 22/24MM

    The BBUNIV-SRAM kit adapts SRAM/Truvativ cranks to virtually any BB/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. For use only with bottom bracket shell widths from 68mm to 83mm. Includes 2 adapter shims and a 15-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    Op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SHIMANO 24MM - ABEC-3 - ZWART

    Wheels Manufacturing’s BB30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into BB30 frames without the need for any adapters. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC-3 bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm (Shimano, FSA, Etc.) cranksets. Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SHIMANO 24MM - ACB - ZWART

    Wheels Manufacturing’s BB30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into BB30 frames without the need for any adapters. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm (Shimano, FSA, Etc.) cranksets. Packaged for retail display.
    Niet op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SHIMANO 24MM - CERAMIC - ZWART

    BB30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into BB30 frames without the need for any adapters. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro Ceramic Hybrid bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm (Shimano, FSA, Etc.) cranks. Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SHIMANO 24MM - ZERO CERAMIC - ZWART

    BB30 to Outboard bottom bracket is designed for installing 24mm (Shimano, FSA, Etc.) cranks into BB30 frames without the need for any adapters. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ZERØ Ceramic bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle cranksets (Shimano, FSA, Etc.). Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SRAM 22/24MM - ABEC-3 - ZWART

    Install 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle cranksets (SRAM, Truvativ, Etc.). No adapters needed. Packaged for retail display.
    Op voorraad
  • Wheels Manufacturing TRAPAS BB30 -> SRAM 22/24MM - ABEC-3/5 ACB - ZWART

    Install 24/22mm (SRAM, Truvativ, Etc.) cranks into BB30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 5 Angular Contact sealed bearing in drive side cup. Enduro ABEC 3 sealed bearing in non-drive side cup. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm (SRAM, Truvativ, Etc.) cranks. No adapters needed. Packaged for retail display.
    Op voorraad