Winkelmand

Jouw winkelmand is leeg

Wheels Mfg - Lager Trekker ID 30MM 6806
Wheels Mfg - Lager Trekker ID 30MM 6806

Wheels Mfg - Lager Trekker ID 30MM 6806

(0)

Omschrijving

Individual extractor for removing 6806 sealed bearing. Bearing ID: 30mm / OD: 42mm / Width: 7mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.

Omschrijving

Individual extractor for removing 6806 sealed bearing. Bearing ID: 30mm / OD: 42mm / Width: 7mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch.

Niet op voorraad

€ 47,49

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specificaties

  • Artikelnummer6806-EXT
  • EAN836572005514
  • MerkenWheels Manufacturing
  • Type gereedschapLager
  • Kleur.Zwart

Anderen kochten ook

  • Wheels Mfg - Lager Kit BB30 42X30X7 2RS + ClipS ACB
    Service kit includes (2) Enduro 6806 Angular Contact sealed bearings and 2 retaining clips. Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm. Direct replacement bearing for BB30 OEM systems. ABEC-5 rated bearing with 5/32 Grade 10 balls, the largest in the industry. Cryogenically treated races will outlast any other bearing on the market. 12% increase in static load rating compared to standard 6806 bearings. Dual lip, groove type seals keep dirt out and 90% fill rate grease in. Rheolube special synthetic grease is long lasting and protects against contamination. Balls are micro-coated with long lasting protection from friction.
    Op voorraad

    € 77,98

  • Wheels Mfg - Trapas MTB BSA Shimano/FSA ACB Zwart
    Redesigned with a new seal system and complete Enduro bearings. External English threaded BB for 73mm shells. Compatible with 24mm spindle (Shimano, FSA, Etc.) cranks. Fully serviceable. Weight: 98g. MTB (73mm Shell width). Black anodized, machined aluminum cups. Enduro Angular Contact bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle (Shimano, FSA, Etc.) cranks. Packaged for retail display.
    Op voorraad

    € 139,98

  • Wheels Mfg - Trapas RACE BSA Sram Abec 3 Grijs
    Redesigned with a new seal system and complete Enduro bearings. External English threaded BB for 68mm shells. Compatible with 24/22mm (SRAM, Truvativ) cranks. Weight: 98g. Road (68mm Shell width). Gray anodized, machined aluminum cups. Enduro 2437 (24mm ID) and 2237 (22mm ID) ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24mm spindle (SRAM, Truvativ) cranksets. Packaged for retail display.
    Op voorraad

    € 114,49

  • Wheels Mfg - Trapas MTB BSA Sram Abec 3 Zwart
    Redesigned with a new seal system and complete Enduro bearings. External English threaded BB for 73mm shells. Compatible with 24/22mm spindle (SRAM, Truvativ) cranks. Fully serviceable. Weight: 98g. MTB (73mm Shell width). Black anodized, machined aluminum cups. Enduro ABEC-3 bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle (SRAM, Truvativ, Etc.) cranks. Packaged for retail display.
    Op voorraad

    € 114,49

    • Reviews

    Aanbevolen accessoires

    • Wheels Mfg - Trapas Sleutel 2 Zijdig 48.5 / 44MM
      Dubbelzijdige Trapas Gereedschap voor het monteren en verwijderen van zowel 48,5mm als 44mm 16-notch bottom bracket cups. Compatibel met alle Wheels Manufacturing trapassen. De socket is gemaakt voor 1/2" drive, maar een 3/8" naar 1/2" adapter wordt meegeleverd zodat je hem kunt gebruiken met 3/8" drive momentsleutels. 48,5 mm, 16 inkepingen patroon komt overeen met Wheels Mfg bottom brackets, samen met sommige FSA MegaEVO bottom brackets. De 44mm, 16-notch kant past bij Wheels Manufacturing bottom brackets, samen met vele andere buitenboord gelagerde bottom brackets waaronder Shimano, FSA MegaEXO, Campagnolo Ultra Torque en SRAM/Truvativ. Bewerkt 6061 Aluminium. Rood geanodiseerd. Compatibel met alle Wheels Manufacturing bottom brackets die de volgende spline patronen hebben: 48,5mm, 16-inkeping, 44mm, 16-inkeping. Ook compatibel met FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque en FSA. Bij gebruik met een niet-Wheels Manufacturing trapas, controleer de technische specificaties bij de betreffende trapas fabrikant voor de exacte maat en patroon.
      Niet op voorraad

      € 71,39