Wheels Mfg - Trapas 386EVO Abec 3 Threaded

Install 24/22mm (SRAM, Truvativ, Etc.) cranks into PF30 frames without adapters! Threaded design = easy install and removal. Fits 68-73mm width shells. Weight: 153g. Made in the USA. Machined, anodized black aluminum cups. Enduro ABEC 3 sealed bearings. Dual silicone seal keeps the contamination out for longer life. Will accept current 24/22mm spindle cranksets (SRAM, Truvativ, Etc.). No adapters needed. Packaged for retail display.

29mm open bore adapter is used to press 29mm x 42mm (DUB Compatible) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. Will press in Wheels Mfg SRAM DUB compatible bottom bracket cups. 1/2" thru hole for use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO). Installs: 29X42 (DUB compatible) bearing Inner Step Outer Diameter: 41.8mm Outer Diameter: 28.9mm Thru Hole Diameter: 12.8mm (1/2") Thickness: 7mm Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod. Machined, red anodized aluminum Sold individually 29SRAM-OB is designed specifically to press in 6806/29 sealed bearings and will also press in Wheels Mfg SRAM DUB compatible bottom brackets. May not be suitable for pressing in other brand's DUB compatible bottom brackets. If used with other brand BBs, make sure the adapter is pushing on either the bearing outer race, or the BB cup itself. Do not push on the bearing seal.

Een set originele vervangingsbouten voor Ritchey stuurpennen. Bestaande uit: - Superlogic C260 zwarte bouten - Torx T20 - 4 stuks M4x15mm en 3 stuks M4x18mm- WCS C220 & Toyon roestvrijstalen zwarte bouten - 4 stuks M5x16mm en 2 stuks M5x18mm- WCS 4-Axis en Comp 4-Axis 44 roestvrijstalen bouten - 4 stuks M5x16mm en 2 stuks M5x18mm- WCS C260 zwarte bouten - Torx T20 - 7 stuks M4x15mm- WCS C260 25D zwarte bouten - Torx T20 - 4 stuks M4x15mm en 2 stuks M5x18mm - WCS Trail zwarte bouten - 6 stuks M5x18mm- Chicane B2 zwarte bouten - Torx T20 - 2 stuks M4x15mm en 2 stuks M5x18mm- Chicane zwarte bouten - Torx T20 - 2 stuks M4x15mm- PRO 4-as 44 - 4 stuks M5x16mm en 2 stuks M6x20mm- Classic C220 & Toyon roestvrij stalen bouten - 4 stuks M5x16mm en 2 stuks M5x18mm- Comp 4-Axis - 4 stuks M5x17mm en 2 stuks M6x20mm

T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 68mm - 100mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 24mm, Weight: 123g, Packaged for retail display.