Your shopping basket is empty
With the threading tool it is possible to create optimal coaxiality of the thread inside the bottom bracket housing. Scope of delivery: - 2 T-holders with drive for bottom bracket taps, - tap pair ITAL, - tap guide with lock nut. Preparation: Remove the plastic transport cover from the taps. Insert the taps into their drive on T-holders. Screw the guiding axle into the T-holder and fix the taps with the lock nut. Use: Before you start with thread chasing, clean the bottom bracket housing. Insert both halfs of the tool into the bottom bracket housing simoultaneously. This way you will avoid jamming and damaging of the existing thread. Please n... Read more
With the threading tool it is possible to create optimal coaxiality of the thread inside the bottom bracket housing. Scope of delivery: - 2 T-holders with drive for bottom bracket taps, - tap pair ITAL, - tap guide with lock nut. Preparation: Remove the plastic transport cover from the taps. Insert the taps into their drive on T-holders. Screw the guiding axle into the T-holder and fix the taps with the lock nut. Use: Before you start with thread chasing, clean the bottom bracket housing. Insert both halfs of the tool into the bottom bracket housing simoultaneously. This way you will avoid jamming and damaging of the existing thread. Please note, that the tool is can be used for thread chasing only, not for cutting a new thread. Accessories: code: 720028 tap pair BSA (1,370“ x 24tpi), code: 720012 cutting oil 100ml. Tip: Use plenty of cutting oil during the work. We also recommend to regularly clean and lubricate the tool with cutting oil to extend its life cycle.
€ 169,94
With the threading tool it is possible to create optimal coaxiality of the thread inside the bottom bracket housing. Scope of delivery: - 2 T-holders with drive for bottom bracket taps, - tap pair ITAL, - tap guide with lock nut. Preparation: Remove the plastic transport cover from the taps. Insert the taps into their drive on T-holders. Screw the guiding axle into the T-holder and fix the taps with the lock nut. Use: Before you start with thread chasing, clean the bottom bracket housing. Insert both halfs of the tool into the bottom bracket housing simoultaneously. This way you will avoid jamming and damaging of the existing thread. Please note, that the tool is can be used for thread chasing only, not for cutting a new thread. Accessories: code: 720028 tap pair BSA (1,370“ x 24tpi), code: 720012 cutting oil 100ml. Tip: Use plenty of cutting oil during the work. We also recommend to regularly clean and lubricate the tool with cutting oil to extend its life cycle.