Your shopping basket is empty
With this puller and a 22mm open-end wrench, you can dismantle or remove any cranks of the bottom bracket axle. Application: First screw the puller with the M22 outer fine thread into the crank. Make sure the thread on the puller is screwed in maximum so that the two flat surfaces max. apart. Now you can use the 22mm wrench tighten the screw. When tightening the crank is subtracted from the bottom bracket axle.
With this puller and a 22mm open-end wrench, you can dismantle or remove any cranks of the bottom bracket axle. Application: First screw the puller with the M22 outer fine thread into the crank. Make sure the thread on the puller is screwed in maximum so that the two flat surfaces max. apart. Now you can use the 22mm wrench tighten the screw. When tightening the crank is subtracted from the bottom bracket axle.
€ 14,96