Your shopping basket is empty
Holder for seat tube reamer to accommodate reamers for the seat tube. For the purposes of reaming the seat tube you also need the appropriate reamer. Application: First screw the lower part of the holder off with a 22 mm wrench. Now insert the corresponding reamer for the tool and screw the lower part firmly back with a 22 mm wrench. Run the holder with the lower part of the seat tube and then rotate it in the cutting direction (clockwise). The reamer create an exact inside diameter of the seat tube. The maximum cutting depth is 270 mm. With the reamer extender (Part No .: 720 103) you can reach a maximum cutting depth of 400 mm.
Holder for seat tube reamer to accommodate reamers for the seat tube. For the purposes of reaming the seat tube you also need the appropriate reamer. Application: First screw the lower part of the holder off with a 22 mm wrench. Now insert the corresponding reamer for the tool and screw the lower part firmly back with a 22 mm wrench. Run the holder with the lower part of the seat tube and then rotate it in the cutting direction (clockwise). The reamer create an exact inside diameter of the seat tube. The maximum cutting depth is 270 mm. With the reamer extender (Part No .: 720 103) you can reach a maximum cutting depth of 400 mm.
€ 79,94