Shopping basket

Your shopping basket is empty

Cyclus - Head Tube Reamer Set 1-1/8 EC 34/15/90° including Cone Guide

(0)

Description

Head tube reamer 1 1/8" (34 mm) complete with reamer. Cyclus Tools special tool to face 1 1/8" (34 mm) head tubes. The head tube reamer creates coaxially exact plane cup seats on the head tube. Max. head tube length: 190mm, max. milling depth: 15mm and max. wall tube thickness: 4 mm. Scope of delivery: - head tube reamer 1 1/8" (34mm), - tool holder, - spindle with thrust bearing, spring and conical guide. Preparation: Install the reamer on the prepared seating of the tool holder. Screw the spindle with conical guide, spring and thrust bearing into the tool holder. Use: First, remove the conical guide from the spindle. Insert the tool from ab... Read more

Description

Head tube reamer 1 1/8" (34 mm) complete with reamer. Cyclus Tools special tool to face 1 1/8" (34 mm) head tubes. The head tube reamer creates coaxially exact plane cup seats on the head tube. Max. head tube length: 190mm, max. milling depth: 15mm and max. wall tube thickness: 4 mm. Scope of delivery: - head tube reamer 1 1/8" (34mm), - tool holder, - spindle with thrust bearing, spring and conical guide. Preparation: Install the reamer on the prepared seating of the tool holder. Screw the spindle with conical guide, spring and thrust bearing into the tool holder. Use: First, remove the conical guide from the spindle. Insert the tool from above into the head tube of the frame. Put the conical guide on the spindle again and apply pressure with the spring. Rotate the tool clockwise. Use cutting oil while working. Continue to rotate clockwise, while taking the tool out of the head tube. Repeat the above steps to ream the bottom side of the head tube. Tip: Before reaming, remove evetually existing chrome plates on the frame, to avoid early abrasion of the reamer. After reaming you might need to remove sharp edges with file. After the use, clean the reamer and keep it in a safe place.

Out of stock

€ 279,95

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code7720006
  • EAN8590831220026
  • BrandCyclus
  • Tool typeHeadset
  • Net weight (g)2117
  • KLeurnew
    • Silver
    • Blue

Others also bought

  • Trivio - Valve Extender Set Black 50mm with Installation Tool

    Extenders are the perfect solution when standard valves are not long enough for higher carbon rims. Unscrew the valve cup of the Presta valve and screw the extender onto the valve using the mounting tool. Calculate in advance which length is needed on the basis of the valve length of the inner tube and the rim height of your wheel. These extenders are 50 mm long.
    In stock
  • Fore - Tubeless Valve 60MM Black

    The FORE clincher wheels CR and CRD are Tubeless Ready (TLR). Tubeless rim tape and valves are included with the wheels. However, these beautiful black valves are also available separately in different lengths.
    In stock
  • BIB RACE 700X25/32C SV 60MM PRESTA

    Good inner tubes are essential to fully enjoy the most beautiful bike rides. The Trivio Road, Cross and MTB inner tubes are made of a high-quality butyl compound. This material ensures durability and good rolling performance.
    In stock
  • Trivio - Road Inner Tube 700X25/32C SV 42MM Presta

    Good inner tubes are essential to fully enjoy the most beautiful bike rides. The Trivio Road, Cross and MTB inner tubes are made of a high-quality butyl compound. This material ensures durability and good rolling performance.
    In stock
  • Reviews

    Description

    Head tube reamer 1 1/8" (34 mm) complete with reamer. Cyclus Tools special tool to face 1 1/8" (34 mm) head tubes. The head tube reamer creates coaxially exact plane cup seats on the head tube. Max. head tube length: 190mm, max. milling depth: 15mm and max. wall tube thickness: 4 mm. Scope of delivery: - head tube reamer 1 1/8" (34mm), - tool holder, - spindle with thrust bearing, spring and conical guide. Preparation: Install the reamer on the prepared seating of the tool holder. Screw the spindle with conical guide, spring and thrust bearing into the tool holder. Use: First, remove the conical guide from the spindle. Insert the tool from above into the head tube of the frame. Put the conical guide on the spindle again and apply pressure with the spring. Rotate the tool clockwise. Use cutting oil while working. Continue to rotate clockwise, while taking the tool out of the head tube. Repeat the above steps to ream the bottom side of the head tube. Tip: Before reaming, remove evetually existing chrome plates on the frame, to avoid early abrasion of the reamer. After reaming you might need to remove sharp edges with file. After the use, clean the reamer and keep it in a safe place.