Shopping basket

Your shopping basket is empty

Cyclus - Headset Press Set Universal 1 +1-1/8 Inch Cyclus - Headset Press Set Universal 1 +1-1/8 Inch 2 Cyclus - Headset Press Set Universal 1 +1-1/8 Inch 3
Cyclus - Headset Press Set Universal 1 +1-1/8 Inch Cyclus - Headset Press Set Universal 1 +1-1/8 Inch 2 Cyclus - Headset Press Set Universal 1 +1-1/8 Inch 3

Cyclus - Headset Press Set Universal 1 +1-1/8 Inch

(0)

Description

With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle, - trapezoidal thread spindle 360mm, - press bush pair, - threaded sleeve, - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve ... Read more

Description

With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle, - trapezoidal thread spindle 360mm, - press bush pair, - threaded sleeve, - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve on the trapezoidal therad of the spindle. Rotate the tool holder and start to press the head cups. Pay attention, that the cups are not getting jammed during the work. Before you begin to press the head cups, check the diameter tolerance of the cup seating in the frame. You might need to correct the size by milling and facing the steerer tube first. Use corresponding head tube facing tools (code: 720005; 720006; 720210). Tip: Put some lubricant on the head cups to be pressed. It will make the work easier and safe the tool.

Out of stock

€ 89,95

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code7720009
  • EAN8590831240239
  • BrandCyclus
  • Tool typeHeadset
  • KLeurnew
    • Silver
    • Blue

Others also bought

  • Trivio - Bicycle Bell Headset Mounted 1-1/8 Black
    Integration is key with this handy bell. Due to its fixation ring which can be mounted below or above the stem, the positioning of this bell is ideal. He warns other road users of your arrival so you can enjoy your bike ride.
    In stock

    € 7,99

  • Enduro - bearing 6000 FE 2RS 10x26/28x8/9 abec 3
    In stock

    € 11,99

  • Trivio - Road Inner Tube 700X18/25C SV 80MM Presta
    Good inner tubes are essential to fully enjoy the most beautiful bike rides. The Trivio Road, Cross and MTB inner tubes are made of a high-quality butyl compound. This material ensures durability and good rolling performance.
    In stock

    € 7,99

  • Trivio - Bike Stand Display Stand
    With this display stand you can easily place your bike at eye level. This allows you to make minor repairs or modifications, clean or present your bike in a showroom environment. The bike is mounted between the brackets which are adjustable in height to fit each model. It is convenient to store in tight spaces thanks to its compact design and extremely very simple construction. Furthermore, this standard is also equipped with plastic protection pads which prevent damage to the frame.
    In stock

    € 17,99

    • Reviews

    Description

    With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle, - trapezoidal thread spindle 360mm, - press bush pair, - threaded sleeve, - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve on the trapezoidal therad of the spindle. Rotate the tool holder and start to press the head cups. Pay attention, that the cups are not getting jammed during the work. Before you begin to press the head cups, check the diameter tolerance of the cup seating in the frame. You might need to correct the size by milling and facing the steerer tube first. Use corresponding head tube facing tools (code: 720005; 720006; 720210). Tip: Put some lubricant on the head cups to be pressed. It will make the work easier and safe the tool.