Bike7 - Cleaning Kit

Highly effective cleaner and degreaser for chains, derailleurs, cassettes and chainrings. Regular use will prolong transmission life. Apply and allow to soak in. Rinse thoroughly with water. After drying, re-lubricate chain. ATTENTION: This is delivered without a trigger. The trigger can be ordered separately under item number THV060450.

Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.

Solvent-free wax emulsion for optimal chain lubrication, precise shifting and noiseless transmission. Easy longterm maintenance. Apply to clean, dry chain. Clean if necessary with Degrease and Clean, rinse and dry. Apply two layers of Pro Wax to the inside of the entire chain, leaving 3 hours between applications. Maintenance: wipe the chain with a cloth, apply a layer of Pro Wax and allow to dry. After 600 km: see point 1. Drying time depends on ambient temperature and air humidity.

Superb road bar constructed from 6061 aluminum that provides impressive comfort and durability. Light road bars made from 6061 aluminum, which includes magnesium and silicone to increase strength for maximum energy efficiency, while reducing weight for faster cycling. ‘Oversized’ 31.8mm diameter increases stiffness without adding weight. A choice of five sizes – 360, 380, 400, 420 and 440mm – suit every size of rider and style of riding. 70mm reach steers you into a comfortable, sustainable position. Drop is based proportionally on width: 360/380mm have a 125mm drop; 400/440mm have a 128mm drop. Half Moon Shape (HMS) bars is a multi-contact drop based on a round shape that’s open at the end, delivering an array of hand positions to match your style of riding. Weighs just 305g for the 420mm option.