Rider 15 neo comes with a clear 2" screen and 3 intuitive buttons, as well as improved software, more than 21 functions, and an orientation mode for displaying which direction the rider is going. Utilizing a large 2" display, the Rider 15 neo makes it even clearer to see speed data on the enlarged data grid. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. Featuring Global Navigation Satellite System (GNSS) support, the Rider 15 neo accommodates more expansive coverage and dexterity in any type of geography, including substantial tree & building cover or in the mountains, as well as providing a wider variety of regions by incorporating GPS (USA), Galileo (EUR) and QZSS (Japan) satellites. Equipped with a powerful 16-hour battery and on-the-go power bank charging support, the Rider 15 neo helps you to take on any distance or peak! Backed up by 21 features, this device supports rich data for accurately gauging the performance of each ride which can be viewed in post-workout analysis from the Bryton Active companion App (available for iOS and Android). Also, the Rider 15 neo integrates BLE Speed, Cadence and Heart Rate sensors including 3rd party sensors after effortless pairing. See phone notifications, including calls, texts and emails, right on the Rider 15 neo after easy setup with the Bryton Active App via BLE (available for iOS and Android), This powerful feature helps to make the Rider 15 neo the definitive smart cycling companion for every Bryton user. Night riding just got a lot more accurate! Equipped with a powerful built-in backlight, the Rider 15 neo's high contrast screen can be brightly illuminated for riding in dimly lit areas or convenient night cycling. Additionally, this device is mix-and-matchable with any bike accessories and will not experience interference from other connected devices or LED lights. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App's STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. Compete with worldwide riders through Rider 15 neo recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 15 neo supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.

Rider 15 neo comes with a clear 2" screen and 3 intuitive buttons, as well as improved software, more than 21 functions, and an orientation mode for displaying which direction the rider is going. Utilizing a large 2" display, the Rider 15 neo makes it even clearer to see speed data on the enlarged data grid. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. Featuring Global Navigation Satellite System (GNSS) support, the Rider 15 neo accommodates more expansive coverage and dexterity in any type of geography, including substantial tree & building cover or in the mountains, as well as providing a wider variety of regions by incorporating GPS (USA), Galileo (EUR) and QZSS (Japan) satellites. Equipped with a powerful 16-hour battery and on-the-go power bank charging support, the Rider 15 neo helps you to take on any distance or peak! Backed up by 21 features, this device supports rich data for accurately gauging the performance of each ride which can be viewed in post-workout analysis from the Bryton Active companion App (available for iOS and Android). Also, the Rider 15 neo integrates BLE Speed, Cadence and Heart Rate sensors including 3rd party sensors after effortless pairing. See phone notifications, including calls, texts and emails, right on the Rider 15 neo after easy setup with the Bryton Active App via BLE (available for iOS and Android), This powerful feature helps to make the Rider 15 neo the definitive smart cycling companion for every Bryton user. Night riding just got a lot more accurate! Equipped with a powerful built-in backlight, the Rider 15 neo's high contrast screen can be brightly illuminated for riding in dimly lit areas or convenient night cycling. Additionally, this device is mix-and-matchable with any bike accessories and will not experience interference from other connected devices or LED lights. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App's STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. Compete with worldwide riders through Rider 15 neo recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 15 neo supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.

Utilizing an advanced high-quality, optically bonded display, the Rider 320 is specially designed to provide a clear and versatile viewing experience Enhancing convenience and compatibility, the Rider 320 provides support for both ANT+ and BLE sensors. Equipped with complete Global Navigation Satellite System (GNSS) support, the Rider 320 provides more extensive coverage and versatility in any type of terrain, even in dense tree/building cover or in the mountains, as well as in more regions by incorporating the top 5 Global Navigation Satellite Systems (GNSS). Designed to create the best viewing experience, the Rider 320 is built with crisp black and white 2.3" large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance. Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 320 after simple pairing. The Rider 320 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains. Rider 320 provides rich data for accurately gauging the performance of each ride. It incorporates up to 72+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. The Rider 320 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording. The Rider 320 aims to increase the compatibility and functionality of ANT+ Power Meters by allowing riders to easily input crank length and calibrate their power meters for more precise power values. Additionally, the Rider 320 now supports Power Pedals, which can be easily calibrated in the same way and allow detailed L/R pedal power analysis. Never worry about missing important phone calls, emails or texts during rides again! Rider 320 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App's STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync also make it easier to share activities and compare with millions. Compete with worldwide riders through Rider 320 recorded data. The Rider 320 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks, Selfloops and Relive. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.

Utilizing an advanced high-quality, optically bonded display, the Rider 320 is specially designed to provide a clear and versatile viewing experience Enhancing convenience and compatibility, the Rider 320 provides support for both ANT+ and BLE sensors. Equipped with complete Global Navigation Satellite System (GNSS) support, the Rider 320 provides more extensive coverage and versatility in any type of terrain, even in dense tree/building cover or in the mountains, as well as in more regions by incorporating the top 5 Global Navigation Satellite Systems (GNSS). Designed to create the best viewing experience, the Rider 320 is built with crisp black and white 2.3" large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance. Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 320 after simple pairing. The Rider 320 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains. Rider 320 provides rich data for accurately gauging the performance of each ride. It incorporates up to 72+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. The Rider 320 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording. The Rider 320 aims to increase the compatibility and functionality of ANT+ Power Meters by allowing riders to easily input crank length and calibrate their power meters for more precise power values. Additionally, the Rider 320 now supports Power Pedals, which can be easily calibrated in the same way and allow detailed L/R pedal power analysis. Never worry about missing important phone calls, emails or texts during rides again! Rider 320 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App's STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync also make it easier to share activities and compare with millions. Compete with worldwide riders through Rider 320 recorded data. The Rider 320 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks, Selfloops and Relive. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.

Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3" high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go! Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3" large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance. Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way. Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing. The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains. Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 77+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be chargedvia power bank while recording. The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals. Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!

Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3" high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go! Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3" large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance. Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way. Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing. The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains. Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 77+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be chargedvia power bank while recording. The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals. Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!

Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3" high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go! Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3" large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance. Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way. Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing. The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains. Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 77+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be chargedvia power bank while recording. The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals. Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!

For cyclists seeking powerful new features and technologies, the Rider 750 incorporates online navigation with preloaded maps and advanced trainings, in combination with new integrations such as Bike Radar System and Smart Trainer support as well as dynamic sensor support. Featuring an interactive Graphical User Interface (GUI) with easy-to-understand icons on a vivid 2.8" color touchscreen, the Rider 750 delivers a captivating user experience while combining powerful features such as Online Navigation with preloaded maps of major regions and voice address search with new technologies such as ANT+ FE-C (Fitness Equipment Control) Indoor Smart Trainer, 3 fully-customizable bike profiles with sensor pool and Bike Radar System support. Additionally, the Rider 750 also incorporates SHIMANO Steps support with detailed E-Bike status fields. Color Touchscreen with GUI Built with a large 2.8" color touch screen, the Rider 750 incorporates a new intuitive Graphical User Interface (GUI) with dynamic colors corresponding to customized HR / Power zones and easy-to-understand icons. Incorporating both a classic cycling page mode as well as a Graphical Mode for viewing cycling data in a vivid multi-colored graphical setup. Online Navigation with OSM Using downloadable OpenStreetMaps (OSM), Rider 750 provides location and detailed direction data at a glance. When using the navigation feature, you can view detailed turn-by-turn route guidance, including distance and direction information before every turn, and, when riding off route, the Rider 750 will automatically reroute to help get the ride back on track. Online Voice Search With connection to the internet, you can use your voice to search for locations on the Rider 750, eliminating the need to use on-screen keyboards. Available in over 100 languages, the voice search features offers a faster, more intuitive and more convenient to find addresses or POIs. Follow Track with POI/Peak Information Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info using the Bryton Active App, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way. Virtual Ride Experience endless possibilities from the comfort of home with Virtual Track Simulation. Utilizing ANT+ FE-C compatibility, the Rider 750 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience. Smart Trainer Workout Easily create custom virtual workouts for smart trainers with the Rider 750 at home! Training plans can be built with the Bryton Active App and downloaded directly to the Rider 750. With ANT+ FE-C support, the Rider 750 will communicate with your smart trainer to simulate the resistance from the training plan. Smart Trainer Control Control your smart trainer right from the Rider 750. Customize the trainer's resistance level to fit your training goals or set the target power to achieve your desired wattage. TrainingPeaks Workout To make training easier than ever, Rider 750 now supports workout plans from TrainingPeaks®. Workouts can be planned on TrainingPeaks® and exported to the Rider 750 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. 3 Easy-to-Switch Profiles Now with support for up to 3 bike profiles, it is easier than ever to customize your device for any type of setup. Settings for each profile can be completely modified, including the ability to rename each profile, for any type of cycling. Auto Sensor Scan After pairing multiple sensors, the Rider 750 will employ the collective sensor pool to automatically scan for nearby active sensors. Simply confirm the sensor connection with the active sensor and it is ready to go. Using the Bryton Active app, sensor names can be customized for easy recognition. ESS Support The Rider 750 supports electronic gear-shifting systems including Shimano's Di2, SRAM's eTap and Campagnolo's EPS. Gear information, such as gear ratio, gear combo and even battery life (such as on the ESS), are displayed immediately on the Rider 750, eliminating the need to manually check the crankset and cassette. Bike Radar Support The Rider 750 supports ANT+ Radar after simple pairing. While in the Meter Page, the radar strip will display approaching vehicles, utilizing the Rider 750's vivid color screen for easy-to-understand vehicle icons and color changes for status, as well as include 3 levels of warning with audio notifications. E-Bike Support Incorporating E-Bike support for Shimano Steps, the Rider 750 can now display various E-Bike data for over 160 bicycle brands, including battery status, current power mode and ride time remaining in current power mode. Wireless Connectivity BLE/ANT+/WLAN Re-Routing E-Bike Shimano Steps Bike Radar Smart Trainer ANT+FE-C Bryton Update Tool/Bryton Active App/On Device Downloadable Global Map Online Navigation Re-Routing Google Fuzzy Search Nearby POI & Address Search

The T variant includes a Heart rate monitor, Speed sensor and Cadence sensor. For cyclists seeking powerful new features and technologies, the Rider 750 incorporates online navigation with preloaded maps and advanced trainings, in combination with new integrations such as Bike Radar System and Smart Trainer support as well as dynamic sensor support. Featuring an interactive Graphical User Interface (GUI) with easy-to-understand icons on a vivid 2.8" color touchscreen, the Rider 750 delivers a captivating user experience while combining powerful features such as Online Navigation with preloaded maps of major regions and voice address search with new technologies such as ANT+ FE-C (Fitness Equipment Control) Indoor Smart Trainer, 3 fully-customizable bike profiles with sensor pool and Bike Radar System support. Additionally, the Rider 750 also incorporates SHIMANO Steps support with detailed E-Bike status fields. Color Touchscreen with GUI Built with a large 2.8" color touch screen, the Rider 750 incorporates a new intuitive Graphical User Interface (GUI) with dynamic colors corresponding to customized HR / Power zones and easy-to-understand icons. Incorporating both a classic cycling page mode as well as a Graphical Mode for viewing cycling data in a vivid multi-colored graphical setup. Online Navigation with OSM Using downloadable OpenStreetMaps (OSM), Rider 750 provides location and detailed direction data at a glance. When using the navigation feature, you can view detailed turn-by-turn route guidance, including distance and direction information before every turn, and, when riding off route, the Rider 750 will automatically reroute to help get the ride back on track. Online Voice Search With connection to the internet, you can use your voice to search for locations on the Rider 750, eliminating the need to use on-screen keyboards. Available in over 100 languages, the voice search features offers a faster, more intuitive and more convenient to find addresses or POIs. Follow Track with POI/Peak Information Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info using the Bryton Active App, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way. Virtual Ride Experience endless possibilities from the comfort of home with Virtual Track Simulation. Utilizing ANT+ FE-C compatibility, the Rider 750 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience. Smart Trainer Workout Easily create custom virtual workouts for smart trainers with the Rider 750 at home! Training plans can be built with the Bryton Active App and downloaded directly to the Rider 750. With ANT+ FE-C support, the Rider 750 will communicate with your smart trainer to simulate the resistance from the training plan. Smart Trainer Control Control your smart trainer right from the Rider 750. Customize the trainer's resistance level to fit your training goals or set the target power to achieve your desired wattage. TrainingPeaks Workout To make training easier than ever, Rider 750 now supports workout plans from TrainingPeaks®. Workouts can be planned on TrainingPeaks® and exported to the Rider 750 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. 3 Easy-to-Switch Profiles Now with support for up to 3 bike profiles, it is easier than ever to customize your device for any type of setup. Settings for each profile can be completely modified, including the ability to rename each profile, for any type of cycling. Auto Sensor Scan After pairing multiple sensors, the Rider 750 will employ the collective sensor pool to automatically scan for nearby active sensors. Simply confirm the sensor connection with the active sensor and it is ready to go. Using the Bryton Active app, sensor names can be customized for easy recognition. ESS Support The Rider 750 supports electronic gear-shifting systems including Shimano's Di2, SRAM's eTap and Campagnolo's EPS. Gear information, such as gear ratio, gear combo and even battery life (such as on the ESS), are displayed immediately on the Rider 750, eliminating the need to manually check the crankset and cassette. Bike Radar Support The Rider 750 supports ANT+ Radar after simple pairing. While in the Meter Page, the radar strip will display approaching vehicles, utilizing the Rider 750's vivid color screen for easy-to-understand vehicle icons and color changes for status, as well as include 3 levels of warning with audio notifications. E-Bike Support Incorporating E-Bike support for Shimano Steps, the Rider 750 can now display various E-Bike data for over 160 bicycle brands, including battery status, current power mode and ride time remaining in current power mode. Wireless Connectivity BLE/ANT+/WLAN Re-Routing E-Bike Shimano Steps Bike Radar Smart Trainer ANT+FE-C Bryton Update Tool/Bryton Active App/On Device Downloadable Global Map Online Navigation Re-Routing Google Fuzzy Search Nearby POI & Address Search

For models BC 7.16 ATS / 9.16 ATS / 14.16 STS / 16.16 STS and PURE 1 ATS.

For BC 23.16 STS and ROX computers using STS transmission).

Optional computer holder set for GUEE G-Mount and GUEE i-Mount products. GUEE C-Bracket is compatible for CATEYE SC100B, PA500B, RD500B, RD100N, RD300W, RD310W, RD400W, RD410W, RD420W, RD430W, GL10,GL11, GL50, GL51, AT200W, PA100W, PD100W, VT220W, MC200W. *Incompatible with TR300TW, TR200DW.

Optional computer holder set for GUEE G-Mount and GUEE i-Mount products. GUEE S-Adapter is compatible for all SIGMA ROX series. For use of ROX 5.0, ROX6.0, ROX8.1, ROX9.1, ROX10.0GPS. Please connect SIGMA bracket to GUEE S-Adapter to mount.

Adapter piece to mount Bryton bike computers on the Trivio Alu Bikemount. This adapter is also supplied with the Alu Bikemount from Trivio, but is also sold separately.

Adapter piece to mount Mio bike computers on the Trivio Alu Bikemount. This adapter is also supplied with the Alu Bikemount from Trivio, but is also sold separately.

With your bicycle computer in front, instead of on top of your handlebar, it's easier to see the data. In addition, you also have a better view of road and traffic. With the Trivio bikemount you can easily snap your Garmin, Bryton or Wahoo device (adapters included). Thanks to the supplied adapters, it fits all standard handlebar diameters. The aluminium bikemount is very light but also sturdy and robust. Thanks to its low point of fixation, your bicycle computer does not exceed the handlebar and the cockpit becomes an aerodynamic unity.

Keep your eyes on the road while navigating and analyzing your performance. This Trivio Bike Mount for Garmin devices positions the cycling computer or navigation in front instead of on the handlebar. This makes your gaze automatically forward instead of downward. This will also cause less neck problems.

Smart Cadence Sensor applies both ANT+ and Bluetooth technology. It wirelessly transmits your cadence data to cycling computers and smart phones. With no magnets and exposed parts to line up, it is much easier to install.

Complete kit for BC 14.16 STS / BC 14.16 STS CAD / BC 16.16 STS / BC 16.16 STS CAD / BC 23.16 STS (also compatible with TOPLINE 2009 / 2012 and ROX computers using STS transmission).