Shopping basket

Your shopping basket is empty

Fore - Brakepads ARP Brake Tcch CR 2 Pieces

(0)

Description

Only specific brake pads can bring a carbon brake surface to a halt. That is why we developed ARP (Advanced Rim brake Performance) for the FORE CR wheels. These brake pads consist of a high-quality compound that has been frequently tested and adjusted on the FORE CR wheels.

* Please note: when using brake pads from other brands, we cannot guarantee safety and the warranty on the FORE CR wheels becomes invalid.

Description

Only specific brake pads can bring a carbon brake surface to a halt. That is why we developed ARP (Advanced Rim brake Performance) for the FORE CR wheels. These brake pads consist of a high-quality compound that has been frequently tested and adjusted on the FORE CR wheels.

* Please note: when using brake pads from other brands, we cannot guarantee safety and the warranty on the FORE CR wheels becomes invalid.

In stock

€ 14,99

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article codeFOR-BP-001
  • EAN8718223013876
  • BrandFore
  • ModelARP BRAKE TECH
  • TypeCR
  • Type of bike
    • Race Bike
    • Gravel Bike
  • Brake pad typeRim Brake
  • Brake surface materialCarbon
  • Compatible brake brand
    • Sram
    • Shimano
  • KLeurnewBlack

Others also bought

  • Trivio - Road Inner Tube 700X18/25C SV 80MM Presta

    Good inner tubes are essential to fully enjoy the most beautiful bike rides. The Trivio Road, Cross and MTB inner tubes are made of a high-quality butyl compound. This material ensures durability and good rolling performance.
    In stock
  • Bike7 - Pro Seal 1 Liter

    Pro Seal is a latex emulsion that quickly seals holes in all tubeless tires, whether mountain bike or racing tires. Pro Seal is applied through the valve or poured directly into the partially disassembled tire and provides effective immediate repair. Can be used in both "Tubeless" and "Tubeless ready" tires. Closes holes up to 8mm. Compatible with CO2 cartridges. Contains natural Latex, is not corrosive or toxic. Pressure resistant up to 7 bar / 100 PSI. INSTRUCTIONS: Disassembled tire: New tire: clean the inside with Bike7 Degrease and wipe. Install one side of the tire and keep the wheel straight. Shake the bottle vigorously and pour the required amount directly into the tire, keeping the bottle upright. Assemble the tire completely. Mounted tire, with the 125 ml bottle: Remove the valve core and place the wheel, valve down, vertically without pressing the rim against the ground. Shake the bottle vigorously, cut the spout 2mm from the end and pour the required amount directly through the valve while keeping the bottle upright. Reassemble the valve. Inflate the tire: Gently turn the wheel one full turn. Inflate the tire until it fits properly. Turn and wiggle the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Adjust the tire to the desired pressure. Road tire (23-30 mm): 60 ml / tire and MTB tire (29 ", 2.0-2.4): 100 ml / tire. A larger amount is recommended for larger tires. A larger amount of product can be used for better protection. Effective life between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and top it up if necessary.
    In stock
  • Trivio - MTB Inner Tube 27½X1.75/2.4 SV 42MM Presta

    Good inner tubes are essential to fully enjoy the most beautiful bike rides. The Trivio Road, Cross and MTB inner tubes are made of a high-quality butyl compound. This material ensures durability and good rolling performance.
    In stock
  • Tacx - Ciro Bottle Cage Black

    The Ciro bottle cage is predominantly made from carbon and is shaped to clamp the bottle very tightly, and has been given a minimalistic design so it does not upstage your bicycle. ts black shell is reinforced by carbon to strengthen the optimized form, so the bottle stays perfectly in place.
    In stock
  • Reviews