Shopping basket

Your shopping basket is empty

Ritchey - Stem WCS C220 Matrix UD Matte 70MM
Ritchey - Stem WCS C220 Matrix UD Matte 70MM

Ritchey - Stem WCS C220 Matrix UD Matte 70MM

(0)

Description

You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Ma... Read more

Description

You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. Material: 3d forged 7075, carbon encased body, 4 x 4mm coated CrMo steel forward-facing faceplate bolts, 2 x 4mm coated CrMo steel offset steer tube clamp bolts, 5Nm torque max on all hardware, Compatible with all 31.8 bars, Press-fit clamp design installs and removes like a standard stem, Lengths: 70-130mm, Angle: 84/6 degree, Steerer Height: 42mm, Steerer: 1-1/8", Faceplate Width: 42mm, Matte UD Carbon Finish, 126g (110mm).

Out of stock

€ 169,90

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code31056117016
  • EAN796941317382
  • BrandRitchey
  • ModelWCS
  • TypeC220 MATRIX
  • MaterialAlloy
  • Material typeAluminum / Carbon
  • Net weight (g)126
  • Handlebar diameter (mm)31.8
  • Steerertube diameter1 1/8"
  • Stem length (mm)70
  • Clamp height (mm)42
  • Steerertube diameter (mm)28.6
  • Angle (°)6
  • KLeurnewBlack

Others also bought

  • Ritchey - Handlebar MTN WCS Flat UD Matte 710MM/9D
    The WCS Carbon 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. Carbon Monocoque Construction. +/-5mm rise. Width: 710mm. Sweep: 9 degrees. Not bar end compatible. Matte UD Finish. 183g.
    In stock

    € 176,90

  • STUURPEN ONE 80MM ±5°
    Superb value-for-money stem constructed from 3D forged 6061 aluminum. Built from 3D forged 6061 aluminum. Forged is significantly stronger than cast methods of building but requires less material, resulting in a stiffer and lighter stem. Faceplate is also constructed from 6061 aluminum, with a strength comparable to steel. Easily flips to give a 5° rise or drop depending on your riding style. Because correct stem length is vital for comfortable bike position and good handling, the One Stem comes in seven sizes, from 60mm up to 120mm. Fits 28.6mm steerers and 31.8mm bar clamps. Weighs just 121g.
    In stock

    € 23,99

  • Controltech - One Stem 70MM 5°
    Superb value-for-money stem constructed from 3D forged 6061 aluminum. Built from 3D forged 6061 aluminum. Forged is significantly stronger than cast methods of building but requires less material, resulting in a stiffer and lighter stem. Faceplate is also constructed from 6061 aluminum, with a strength comparable to steel. Easily flips to give a 5° rise or drop depending on your riding style. Because correct stem length is vital for comfortable bike position and good handling, the One Stem comes in seven sizes, from 60mm up to 120mm. Fits 28.6mm steerers and 31.8mm bar clamps. Weighs just 121g.
    In stock

    € 23,99

  • Trivio - Stem Trust 90Mm
    You can rely on the Trivio Trust bicycle parts during every ride. The Trust stem is made of 3D forged 6061-T6 aluminum. This results in a light yet sturdy stem. He has different length versions. Choose the length that determines your optimal bike position and enjoy comfortable cycling adventures. With its reversible logo imprint you can also point it upwards so your handlebars are positioned higher. The logo and line decals on the Trust bike parts are stylish and fit every bike.
    In stock

    € 31,99

    • Reviews

    Recommended accesories

    • Ritchey - Handlebar MTN WCS Flat UD Matte 710MM/9D
      The WCS Carbon 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. Carbon Monocoque Construction. +/-5mm rise. Width: 710mm. Sweep: 9 degrees. Not bar end compatible. Matte UD Finish. 183g.
      In stock

      € 176,90

    • Ritchey - Handlebar MTN WCS Low Rizer UD Matte 740MM/15MM
      Proven WCS carbon technology in a 15mm rise bar. Textured stem clamp area reduces risk of bar slippage. Reinforced internally to accept bar ends and shifter/lever clamp. Carbon Monocoque, 15mm rise, 9 degree sweep. Width: 740mm. 31.8mm O/S center section. Matte UD carbon finish. Weight: 180g.
      Out of stock

      € 189,90

    Description

    You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. Material: 3d forged 7075, carbon encased body, 4 x 4mm coated CrMo steel forward-facing faceplate bolts, 2 x 4mm coated CrMo steel offset steer tube clamp bolts, 5Nm torque max on all hardware, Compatible with all 31.8 bars, Press-fit clamp design installs and removes like a standard stem, Lengths: 70-130mm, Angle: 84/6 degree, Steerer Height: 42mm, Steerer: 1-1/8", Faceplate Width: 42mm, Matte UD Carbon Finish, 126g (110mm).