Shopping basket

Your shopping basket is empty

Ritchey - Stem WCS C220 Matrix UD Matte 80MM

(0)

Description

You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Ma... Read more

Description

You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. Material: 3d forged 7075, carbon encased body, 4 x 4mm coated CrMo steel forward-facing faceplate bolts, 2 x 4mm coated CrMo steel offset steer tube clamp bolts, 5Nm torque max on all hardware, Compatible with all 31.8 bars, Press-fit clamp design installs and removes like a standard stem, Lengths: 70-130mm, Angle: 84/6 degree, Steerer Height: 42mm, Steerer: 1-1/8", Faceplate Width: 42mm, Matte UD Carbon Finish, 126g (110mm).

Out of stock

€ 169,90

  • Klantenbeoordeling
  • Voor 17u besteld, dezelfde werkdag verzonden
  • Eenvoudig binnen 14 dagen retourneren

Specifications

  • Article code31056117017
  • EAN796941317399
  • BrandRitchey
  • ModelWCS
  • TypeC220 MATRIX
  • MaterialAlloy
  • Material typeAluminum / Carbon
  • Net weight (g)126
  • Handlebar diameter (mm)31.8
  • Steerertube diameter1 1/8"
  • Stem length (mm)80
  • Clamp height (mm)42
  • Steerertube diameter (mm)28.6
  • Angle (°)6
  • KLeurnewBlack

Others also bought

  • Ritchey - Handlebar MTN WCS Flat UD Matte 710MM/9D

    The WCS Carbon 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. Carbon Monocoque Construction. +/-5mm rise. Width: 710mm. Sweep: 9 degrees. Not bar end compatible. Matte UD Finish. 183g.
    In stock
  • Ritchey - WCS Spacer Set Carbon UD Mat 3X5MM + 3X10MM

    The iconic Ritchey logo is proudly emblazoned on these original 1-1/8" superlight carbon headset spacers. UD Matte Carbon Black on black Ritchey logo 1-1/8" 5mm and 10mm height
    In stock
  • Goodyear - Peak Ultimate TLC 29X2.25 TAN

    When it's time to drop the hammer and crush some climbs, Peak is mountain biking's speed demon. A round profile, closely-spaced tread, and supple casing contribute to Peak's low rolling resistance, while ample traction and braking performance are delivered thanks to siping on every knob and its multi-dimensional Dynamic:A/T compound. Goodyear Bicycle Tires proprietary design that features all the benefits of a Tubeless Ready (TLR) tire but will also better maintain inflation pressure than a traditional TLR tire.
    In stock
  • Wheels Mfg - Bottom bracket adapter BB30/PF30 Shimano

    The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. Includes 2 adapter shims and a 14-piece assortment of left and right side spacers. Machined engineering-grade Delrin.
    In stock
  • Reviews

    Recommended accesories

    • Ritchey - Handlebar MTN WCS Flat UD Matte 710MM/9D

      The WCS Carbon 2X bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. Carbon Monocoque Construction. +/-5mm rise. Width: 710mm. Sweep: 9 degrees. Not bar end compatible. Matte UD Finish. 183g.
      In stock
    • Ritchey - Handlebar MTN WCS Low Rizer UD Matte 740MM/15MM

      Proven WCS carbon technology in a 15mm rise bar. Textured stem clamp area reduces risk of bar slippage. Reinforced internally to accept bar ends and shifter/lever clamp. Carbon Monocoque, 15mm rise, 9 degree sweep. Width: 740mm. 31.8mm O/S center section. Matte UD carbon finish. Weight: 180g.
      Out of stock

    Description

    You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it’s quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. Material: 3d forged 7075, carbon encased body, 4 x 4mm coated CrMo steel forward-facing faceplate bolts, 2 x 4mm coated CrMo steel offset steer tube clamp bolts, 5Nm torque max on all hardware, Compatible with all 31.8 bars, Press-fit clamp design installs and removes like a standard stem, Lengths: 70-130mm, Angle: 84/6 degree, Steerer Height: 42mm, Steerer: 1-1/8", Faceplate Width: 42mm, Matte UD Carbon Finish, 126g (110mm).